{"title":"SJE Rhombus Float Switches and Accessories","description":"\u003cp\u003eThe float switch you choose determines how reliably your pump turns on, off, and signals an alarm. \u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus\u003c\/a\u003e has been making them since 1975, and Cleanflow stocks the models North American installers ask for: the most wide-angle pump switches, narrow-angle control switches, piggyback assemblies, vertical floats for tight pits, plus the cable weights, brackets, anchors, and cord seals that finish the install.\u003c\/p\u003e\n\n\u003ch2\u003eHow to Pick the Right SJE Float Switch\u003c\/h2\u003e\n\u003cp\u003eTwo questions narrow the field fast:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIs the float controlling the pump directly, or is it sending a signal to a control panel or alarm? Pump switches handle the full motor load. Control switches send a low-current on\/off signal to a panel.\u003c\/li\u003e\n\u003cli\u003eHow much liquid level change should activate the float? Wide-angle floats tip 4 inches above and below the horizontal. They're for pump on\/off, where a wide pumping range is fine. Narrow-angle floats tip just 1.5 inches. They're for precise stop, lead, lag, and alarm levels in tight basins or duplex installs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePump Switch vs. Control Switch\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump switch\u003c\/td\u003e\n\u003ctd\u003eCarries full pump motor load. Wired in line with the pump or used as a piggyback plug.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl switch\u003c\/td\u003e\n\u003ctd\u003eLow-current signal to a control panel or alarm. Does not carry pump load.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWide-Angle vs. Narrow-Angle\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003cth\u003eActivation movement\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWide angle (~4\")\u003c\/td\u003e\n\u003ctd\u003eFloat tips ~4 inches above and below the horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNarrow angle (~1.5\")\u003c\/td\u003e\n\u003ctd\u003eFloat tips ~1.5 inches above or below the horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eShop SJE Float Switches by Category\u003c\/h2\u003e\n\n\u003ch3\u003eWide-Angle Pump Switches\u003c\/h3\u003e\n\u003cp\u003eDirect pump control with mechanical, non-mercury switching. Carries full motor load and tips on a wide arc, good fit for single-pump sumps, septic tanks, and dewatering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-pumpmaster-plus-15-amp-wide-angle-piggyback-plug-pump-float-switch-120-240v\"\u003eSJE PumpMaster Plus\u003c\/a\u003e — wide-angle piggyback for 120V\/240V pumps up to 2 HP, non-mercury, UL\/CSA certified\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-pumpmaster-spdt-13-amp-three-wire-wide-angle-pump-float-switch\"\u003eSJE PumpMaster SPDT\u003c\/a\u003e — 13 amp wide-angle three-wire setup, 7\"–36\" adjustable range, NSF-61 rated\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-ampmaster-20-amp-wide-angle-pump-float-switch\"\u003eSJE AmpMaster\u003c\/a\u003e — 20 amp wide-angle for 120V\/240V pumps up to 3 HP, mounting clamp included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNarrow-Angle Control Switches\u003c\/h3\u003e\n\u003cp\u003eLow-current signals into a pump control panel or alarm. Tip on a tight 1.5″ arc for precise stop, lead, lag, and alarm levels in lift stations and duplex installs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-signalmaster-narrow-angle-float-switch-mechanically-activated-pump-control-switch-normally-open-closed-options\"\u003eSJE SignalMaster\u003c\/a\u003e — narrow-angle, mechanically activated, normally open or normally closed, paired with NEX Series panels\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-megamaster-non-mercury-pump-control-float-switch\"\u003eSJE MegaMaster\u003c\/a\u003e — narrow-angle SPDT, internally weighted, no external weight required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePiggyback Float Switches\u003c\/h3\u003e\n\u003cp\u003ePlug-and-play. Float plugs into the outlet, pump plugs into the float, no control panel needed. Best for residential sump and effluent installs where simple direct control is enough.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-double-floatmaster-15-amp-piggyback-float-switch-assembly-120-240v\"\u003eSJE Double FloatMaster\u003c\/a\u003e — dual piggyback for accurate on\/off control in confined or turbulent pits, adjustable 3\"–48\" range\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-verticalmaster-3-plus-piggyback-sump-pump-float-switch-assembly-120-240v-1-2-to-1-hp-non-mercury-stainless-steel-bracket-ul-csa-approved\"\u003eSJE VerticalMaster 3 Plus\u003c\/a\u003e — vertical operation for narrow sump pits with limited clearance, 0.75\"–6.5\" adjustable range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFloat Switch Accessories\u003c\/h3\u003e\n\u003cp\u003eWhat finishes the install — cable weights for hanging floats, brackets for organizing multi-float installs, anchors for tight pits, and cord seals for sealed junction boxes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-adjustable-float-switch-cable-weight\"\u003eSJE Adjustable Float Switch Cable Weight\u003c\/a\u003e — sets the pivot point for hanging floats, lead-free, tool-free adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-stainless-steel-four-float-bracket\"\u003eSJE Stainless Steel Four-Float Bracket\u003c\/a\u003e — corrosion-resistant mounting for stop\/lead\/lag\/alarm float arrangements\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-mushroom-anchor-10-lb\"\u003eSJE Mushroom Float Switch Anchor (10 lb)\u003c\/a\u003e — lead-free yellow anchor for tight pump pits where pipe-mount isn't practical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMatch the Float Switch to the Application\u003c\/h2\u003e\n\n\u003ch3\u003eResidential sump pit\u003c\/h3\u003e\n\u003cp\u003eA wide-angle piggyback float like the SJE PumpMaster Plus is the standard fit for a typical sump basin, plug-and-play, no panel needed. If the pit is narrow with limited vertical clearance, the SJE VerticalMaster 3 Plus operates vertically in spaces where a tipping float can't.\u003c\/p\u003e\n\n\u003ch3\u003eSeptic effluent or sewage tank\u003c\/h3\u003e\n\u003cp\u003eA wide-angle pump switch handles the load directly. The SJE PumpMaster SPDT (13 amp, 7\"–36\" range) covers most residential effluent pumps; the SJE AmpMaster (20 amp, up to 3 HP) handles the heavier-duty side. Both are non-mercury with polypropylene float housings rated for sewage.\u003c\/p\u003e\n\n\u003ch3\u003eLift station with a duplex panel\u003c\/h3\u003e\n\u003cp\u003eThree or four narrow-angle control switches are wired to the panel as stop, lead, lag, and alarm. The SJE SignalMaster is the standard pairing for SJE NEX Series panels, and the SJE MegaMaster is the internally weighted alternative for installs without pipe-mount access.\u003c\/p\u003e\n\n\u003ch3\u003eCistern or potable water\u003c\/h3\u003e\n\u003cp\u003eUse NSF\/ANSI 61 certified switches, the SJE PumpMaster WPS for direct pump control up to 1 HP, or the SJE MilliAmpMaster WPS for low-current AC\/DC control to a panel.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-temperature sump (laundry, condensate, hot effluent)\u003c\/h3\u003e\n\u003cp\u003eThe SJE HiTempMaster is the only float in the SJE line rated up to 200°F. Standard floats top out at 140°F.\u003c\/p\u003e\n\n\u003ch3\u003eConfined or turbulent pit\u003c\/h3\u003e\n\u003cp\u003eTwo floats give more stable on\/off control than one in turbulent water. The SJE Double FloatMaster is a piggyback dual-float assembly with an adjustable 3\"–48\" pumping range. Pump cycling drops noticeably compared with a single-float setup.\u003c\/p\u003e\n\n\u003ch3\u003eLow-current PLC, IS panel, or solar control\u003c\/h3\u003e\n\u003cp\u003eThe SJE MilliAmpMaster is the right call here. Gold cross-point contacts handle the low-current switching that wears out standard contacts.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Standard Across the SJE Float Switch Line\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMechanically activated, non-mercury switching (legacy mercury floats are not stocked here)\u003c\/li\u003e\n\u003cli\u003eHigh-impact polypropylene or PVC float housings rated for sewage and water up to 140°F (200°F for HiTempMaster)\u003c\/li\u003e\n\u003cli\u003eUL Listed and CSA Certified NSF\/ANSI 61 on potable-water-rated models\u003c\/li\u003e\n\u003cli\u003e5-Year Limited Warranty from SJE Rhombus\u003c\/li\u003e\n\u003cli\u003eStandard cable lengths are typically 10 ft, 15 ft, 20 ft, or 30 ft, depending on the model\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy SJE Rhombus Float Switches Online from Cleanflow\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e stocks the full SJE Rhombus float switch range, pump switches and control switches, wide-angle and narrow-angle, piggyback and pipe-clamp, plus the cable weights, brackets, anchors, and cord seals to finish the install.\u003c\/p\u003e\n\u003cp\u003eAdd to cart, or contact the team to confirm switch type, cable length, and configuration for your application. We ship across Canada and the USA.\u003c\/p\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat's the difference between a pump switch and a control switch?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA pump switch carries the full pump motor load and turns the pump on or off directly. A control switch carries a low-current signal to a separate pump control panel or alarm. It tells the panel what to do, but doesn't drive the pump itself. Wide-angle floats are usually pump switches; narrow-angle floats are usually control switches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eShould I get a wide-angle or narrow-angle float?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eWide-angle (about 4 inches above and below horizontal) is the right call for a single-float pump on\/off, where a wider pumping range is fine. Narrow-angle (about 1.5 inches) is for precise level control in multi-float panel installs, duplex lift stations with stop, lead, lag, and alarm floats, or tight basins where overshoot would cause nuisance cycling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does \"piggyback\" mean on a float switch?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA piggyback plug is a two-stage plug. The float switch plugs into the wall outlet, then the pump plugs into the back of the float switch's plug. The float controls power to the pump automatically, no control panel needed. Common on residential sump and effluent installs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eAre SJE float switches non-mercury?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. Every SJE float switch Cleanflow stock is mechanically activated. Mercury tilt-switch floats are no longer in the SJE product line. Modern jurisdictions restrict mercury, and mechanically activated switches are more durable in service anyway.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhich SJE float switches are NSF-61 certified for potable water?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe PumpMaster WPS (wide-angle pump switch) and the MilliAmpMaster WPS (narrow-angle control switch) are both NSF\/ANSI 61 certified for use in drinking water systems. Standard SJE floats are rated for sewage and non-potable water only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat cable length should I order?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eMatch cable length to the run between the float position in the basin and the pump control panel, junction box, or outlet. A few feet of slack helps. Most SJE floats ship in 10, 15, 20, or 30 ft. If the run exceeds available cable lengths, splice in a sealed UL Type 4X junction box. Never run an unprotected splice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat accessories do I need with my float switch?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIf the float is pipe-mounted, the stainless steel hose clamp ships with the switch. If you're hanging the float from above, you need a cable weight to set the pivot point. The SJE Adjustable Float Switch Cable Weight covers that. For multi-float installs, the Four-Float Bracket organizes stop, lead, lag, and alarm floats. For confined pits where pipe-mount isn't possible, the Mushroom Anchor anchors a stainless chain at the bottom.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the warranty on SJE float switches?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eSJE Rhombus backs its float switches with a 5-Year Limited Warranty covering defects in materials and workmanship. Installation must follow the manufacturer's instructions and applicable electrical codes. A qualified electrician should handle the wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","products":[{"product_id":"sje-ampmaster-20-amp-wide-angle-pump-float-switch","title":"SJE Rhombus AmpMaster® 20 Amp Wide-Angle Pump Switch | Eco-Friendly, UL\/CSA Certified, for 120V\/240V up to 3 HP, Includes Mounting Clamp","description":"\u003ch2\u003eMaster Pump Control with SJE Rhombus AmpMaster® Wide Angle Float Switch\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eSJE AmpMaster® 20 Amp wide-angle float switch\u003c\/strong\u003e is a mechanically-activated pump float switch designed for reliable control of sump, sewage, and wastewater pumps. It provides direct control of pumps up to 1-1\/2 HP at 120V and 3 HP at 240V, making it a dependable solution for lift stations, septic systems, and high-head sewage applications.\u003c\/p\u003e\n\n\u003cp\u003eThis wide-angle pump float switch is not sensitive to rotation or turbulence, allowing consistent performance in both calm and turbulent conditions. Designed for pump-down operation, it activates as the liquid rises and shuts off as the levels drop. With a non-mercury mechanical design, UL\/CSA certifications, and a five-year warranty, it delivers long-term reliability.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features of the SJE Rhombus AmpMaster\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eDirect Pump Control (20 Amp Rated)\u003c\/strong\u003e\u003cbr\u003e\nControls pumps up to 1-1\/2 HP at 120V and 3 HP at 240V\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWide Angle Float Switch Design\u003c\/strong\u003e\u003cbr\u003e\nProvides a larger activation range, reducing pump cycling and extending pump life\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePump Down Operation\u003c\/strong\u003e\u003cbr\u003e\nNormally open contacts designed for emptying applications\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Construction\u003c\/strong\u003e\u003cbr\u003e\nHeavy-duty contacts mounted on high-conductivity copper substrates\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdjustable Pumping Range\u003c\/strong\u003e\u003cbr\u003e\n9\" to 24\" adjustable range\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNon-Mercury Mechanical Design\u003c\/strong\u003e\u003cbr\u003e\nEco-friendly and suitable for wastewater environments\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFlexible Cable Options\u003c\/strong\u003e\u003cbr\u003e\nAvailable up to 30 feet\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCorrosion-Resistant Float Housing\u003c\/strong\u003e\u003cbr\u003e\nHigh-impact PVC housing\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWater-Resistant Cable\u003c\/strong\u003e\u003cbr\u003e\n12-gauge SJOW cable (UL, CSA)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes Mounting Clamp\u003c\/strong\u003e\u003cbr\u003e\nFor secure installation\u003c\/p\u003e\n\n\u003ch2\u003eHow This Wide Angle Pump Float Switch Works\u003c\/h2\u003e\n\n\u003cp\u003eThis mechanically-activated float switch responds to movement of the float.\u003c\/p\u003e\n\n\u003cp\u003eAs liquid rises, the float tilts upward, activating internal contacts and turning the pump on. As levels drop, the float returns to resting position and turns the pump off.\u003c\/p\u003e\n\n\u003cp\u003eThe wide-angle design reduces frequent cycling and improves efficiency.\u003c\/p\u003e\n\n\u003ch2\u003eBest Applications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eSump pump systems\u003c\/li\u003e\n\u003cli\u003eSewage and wastewater systems\u003c\/li\u003e\n\u003cli\u003eLift stations\u003c\/li\u003e\n\u003cli\u003eSeptic systems\u003c\/li\u003e\n\u003cli\u003eGrinder pump applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis makes it an excellent sewage float switch and lift station solution.\u003c\/p\u003e\n\n\u003ch2\u003ePump Down Operation\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eNormally open contacts\u003c\/li\u003e\n\u003cli\u003ePump turns ON when liquid rises\u003c\/li\u003e\n\u003cli\u003ePump turns OFF when liquid drops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eWide-angle float switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation Type\u003c\/td\u003e\n\u003ctd\u003ePump down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch Type\u003c\/td\u003e\n\u003ctd\u003eDirect wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eSump, sewage, wastewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Run Current\u003c\/td\u003e\n\u003ctd\u003e20 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Start Current\u003c\/td\u003e\n\u003ctd\u003e120 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120\/240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Pump (120V)\u003c\/td\u003e\n\u003ctd\u003e1-1\/2 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Pump (240V)\u003c\/td\u003e\n\u003ctd\u003e3 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePumping Range\u003c\/td\u003e\n\u003ctd\u003e9\" to 24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e12 gauge SJOW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Material\u003c\/td\u003e\n\u003ctd\u003ePVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003eUp to 120°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant Electrical \u0026amp; Application Notes\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal Protection\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Circuits\u003c\/td\u003e\n\u003ctd\u003eNot suitable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Load\u003c\/td\u003e\n\u003ctd\u003eNot under 1 amp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacitor\u003c\/td\u003e\n\u003ctd\u003eMay be required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eDirect wiring only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eGet the 20 Amp Rated SJE AmpMaster® Pump Switch\u003c\/h2\u003e\n\n\u003cp\u003eUpgrade your system with the reliable SJE AmpMaster® wide-angle float switch.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e supplies SJE Rhombus products across Canada and the USA. Browse \u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus Controls \u0026amp; Alarms\u003c\/a\u003e for more options.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a wide angle float switch?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA wide-angle float switch provides a larger difference between ON and OFF levels, reducing pump cycling and improving efficiency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a pump-down float switch?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA pump-down float switch activates when water rises and shuts off when levels drop.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this be used as a sewage float switch?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, it is designed for sewage, wastewater, and lift station applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this a piggyback float switch?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo, this model is designed for direct wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat size pump can this float switch control?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1-1\/2 HP at 120V\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3 HP at 240V\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow do I adjust the pumping range?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eAdjust the tether length to change ON\/OFF range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhere can I buy this product?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYou can purchase it from Cleanflow across Canada and the USA.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"10 Foot Pump Down","offer_id":10601486660,"sku":"1006310","price":172.89,"currency_code":"CAD","in_stock":true},{"title":"20 Foot Pump Down","offer_id":10601486852,"sku":"1006312","price":188.96,"currency_code":"CAD","in_stock":true},{"title":"30 Foot Pump Down","offer_id":12635583676477,"sku":"1006313","price":226.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_AmpMaster.jpg?v=1774786087"},{"product_id":"sje-adjustable-float-switch-cable-weight","title":"SJE Adjustable Float Switch Cable Weight – Accurate Pivot Point Control for Float Switches","description":"\u003ch2\u003eSJE Lead-Free Adjustable Float Switch Cable Weight: Precise Control for Reliable Operation\u003c\/h2\u003e\n\n\u003cp\u003eThe SJE adjustable float switch cable weight is designed to create a fixed pivot point for suspended float switches, helping control activation levels with accuracy and consistency. Instead of relying on guesswork, this float switch weight allows you to set a defined switching range by adjusting the tether length along the cable.\u003c\/p\u003e\n\n\u003cp\u003eUsed in sump, sewage, lift station, and water tank systems, this adjustable float switch weight improves float movement control, reduces erratic cycling, and helps maintain reliable pump operation across a wide range of applications.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is a Float Switch Cable Weight?\u003c\/h2\u003e\n\n\u003cp\u003eA float switch cable weight is a simple but essential accessory used in tethered float switch systems. It attaches directly to the float cable and acts as a pivot point, allowing the float to move up and down at controlled angles.\u003c\/p\u003e\n\n\u003cp\u003eThis pivot point determines when the float switch turns on and off. By adjusting the position of the weight, you can fine-tune the switching levels to match your system requirements.\u003c\/p\u003e\n\n\u003cp\u003eThis makes it a key component in:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003ePump control systems\u003c\/li\u003e\n\u003cli\u003eSewage and wastewater applications\u003c\/li\u003e\n\u003cli\u003eLift stations\u003c\/li\u003e\n\u003cli\u003eWater storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow the Float Switch Weight Works (Pivot Point Control)\u003c\/h2\u003e\n\n\u003cp\u003eOnce installed on the cable, the float switch cable weight adjustable design creates a fixed point where the float pivots.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eThe float rises → reaches activation angle → switch turns ON\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe float falls → drops below the angle → switch turns OFF\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe distance between the float and the weight (tether length) controls this switching range.\u003c\/p\u003e\n\n\u003cp\u003eRecommended setup:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eControl switches: ~4 inches tether length\u003c\/li\u003e\n\u003cli\u003ePump switches: minimum ~3.5 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis is why proper placement of the float switch pivot point weight is critical for consistent system performance.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features of the SJE Adjustable Cable Weight\u003c\/h2\u003e\n\n\u003ch3\u003eTool-Free Adjustment\u003c\/h3\u003e\n\u003cp\u003eAdjust the float switch cable weight directly on the cable without tools. This makes setup and fine-tuning quick and straightforward during installation or maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eSecure Gripper Teeth Lock\u003c\/h3\u003e\n\u003cp\u003eGripper teeth on the clip and weight channel securely lock the cable into place, helping prevent slipping, drift, or misalignment over time.\u003c\/p\u003e\n\n\u003ch3\u003eAccurate Pivot Point Control\u003c\/h3\u003e\n\u003cp\u003eCreates a stable and repeatable pivot point, improving float switch accuracy and ensuring consistent activation levels.\u003c\/p\u003e\n\n\u003ch3\u003eBroad Cable Compatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with a wide range of cables, including:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSJOW and SJTW\u003c\/li\u003e\n\u003cli\u003e18\/2, 18\/3\u003c\/li\u003e\n\u003cli\u003e16\/2, 16\/3\u003c\/li\u003e\n\u003cli\u003e14\/2, 14\/3\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eLead-Free, Durable Construction\u003c\/h3\u003e\n\u003cp\u003eMade with a non-corrosive, impact-resistant PVC housing, suitable for wastewater and non-potable water environments up to 140°F (60°C).\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eThis adjustable cable weight for float switch systems is commonly used in:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSump pump systems\u003c\/li\u003e\n\u003cli\u003eSewage and wastewater systems\u003c\/li\u003e\n\u003cli\u003eLift stations\u003c\/li\u003e\n\u003cli\u003eEffluent and greywater systems\u003c\/li\u003e\n\u003cli\u003eWater storage and holding tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIt is suitable for residential, commercial, and municipal installations where accurate level control is required.\u003c\/p\u003e\n\n\u003ch2\u003eHow to Adjust a Float Switch Cable Weight\u003c\/h2\u003e\n\n\u003cp\u003eInstalling and adjusting the weight is simple:\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003ePlace the cable into the weight channel\u003c\/li\u003e\n\u003cli\u003eAlign the clip with the groove\u003c\/li\u003e\n\u003cli\u003eSlide and snap the clip tightly onto the cable\u003c\/li\u003e\n\u003cli\u003ePosition the weight to achieve the desired tether length\u003c\/li\u003e\n\u003cli\u003eTest the float movement to confirm proper activation levels\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eThis simple process makes it easy to fine-tune your system without rewiring or complex adjustments.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Weight\u003c\/td\u003e\n\u003ctd\u003e1 lb 5 oz (0.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e1.6 lbs (0.726 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.8\" diameter × 3.3\" length (7.1 cm × 8.4 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eImpact-resistant, non-corrosive PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Liquid Temperature\u003c\/td\u003e\n\u003ctd\u003eUp to 140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClip Material\u003c\/td\u003e\n\u003ctd\u003eInjection-molded acetal plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Compatibility\u003c\/td\u003e\n\u003ctd\u003eSJOW, SJTW, 18\/2, 18\/3, 16\/2, 16\/3, 14\/2, 14\/3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eAdjustable, tool-free cable-mounted weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eProvides accurate pivot point for suspended float switches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Adjustable_Float_Switch.png?v=1774771936\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Float_Switch_Cable.png?v=1774772041\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Adjustable_Float_Switch.png?v=1774772046\" alt=\"\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eWhy Use an Adjustable Float Switch Weight?\u003c\/h2\u003e\n\n\u003cp\u003eAdding a float switch weight improves system performance by:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eMaintaining consistent on\/off levels\u003c\/li\u003e\n\u003cli\u003ePreventing float drift or unstable movement\u003c\/li\u003e\n\u003cli\u003eReducing the short cycling of pumps\u003c\/li\u003e\n\u003cli\u003eImproving overall system reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWithout a properly positioned weight, float switches may activate inconsistently, leading to inefficient operation or potential system issues.\u003c\/p\u003e\n\n\u003ch2\u003eBuy SJE Adjustable Float Switch Cable Weight from Cleanflow\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e supplies a full range of \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus Controls \u0026amp; Alarms\u003c\/a\u003e\u003c\/strong\u003e, including float switches, control switches, alarm systems, and \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus-float-switches-and-accessories\"\u003efloat switch accessories\u003c\/a\u003e\u003c\/strong\u003e for reliable liquid level control. From float switch cable weights to complete pump control solutions, each product is selected for performance in demanding environments.\u003c\/p\u003e\n\n\u003cp\u003eWe ship across Canada and the USA, offering competitive pricing, fast shipping, and dependable product availability for contractors, municipalities, and industrial applications.\u003c\/p\u003e\n\n\u003cp\u003eOrder your SJE adjustable float switch cable weight today to improve float switch accuracy and maintain consistent, reliable system operation.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does a float switch cable weight do?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt creates a fixed pivot point on the cable, allowing the float to move at controlled angles and activate the switch at consistent levels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow do you adjust a float switch cable weight?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYou slide the weight along the cable to set the tether length, then lock it in place using the built-in clip. No tools are required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the correct tether length for a float switch?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eTypical recommendations are about 4 inches for control switches and at least 3.5 inches for pump switches, depending on the application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan this be used with any float switch?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, this float switch cable weight is compatible with most tethered float switches that use SJOW or SJTW cables within the supported gauge range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDo all float switches require a cable weight?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo, only tethered (suspended) float switches use cable weights. Vertical or rod-mounted float switches do not require one.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"Default Title","offer_id":33007351529533,"sku":"1002230","price":21.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Lead-Free_Adjustable_Float_Switch.jpg?v=1774772143"},{"product_id":"sje-double-floatmaster-15-amp-piggyback-float-switch-assembly-120-240v","title":"SJE Rhombus Double FloatMaster™ Dual Piggyback Float Switch for Direct Pump Control","description":"\u003ch2\u003eDual Float Switch Assembly for Reliable Pump Control in Tight and Turbulent Conditions\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSJE Rhombus Double FloatMaster™\u003c\/strong\u003e is a dual float switch designed for direct pump control in confined spaces, small diameter pits, and turbulent wastewater environments. This piggyback float switch operates 120V and 240V pumps (up to 2 HP), delivering a consistent and adjustable pumping range from 3\" to 48\".\u003c\/p\u003e\n\u003cp\u003eUnlike single float designs, this double float pump switch uses two mechanical floats to control pump start and stop levels more accurately. The result is stable operation, reduced pump cycling, and improved system reliability in demanding sump, sewage, and lift station applications.\u003c\/p\u003e\n\u003cp\u003eThis float switch assembly features a piggyback plug configuration, allowing you to control your pump directly without a separate control panel, ideal for both permanent installations and temporary setups.\u003c\/p\u003e\n\u003ch2\u003eKey Features of the Dual Float Switch Assembly\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Float Design for Accurate Control\u003c\/strong\u003e\u003cbr\u003eTwo floats work together to manage pump ON and OFF levels, improving performance in turbulent or narrow environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Pump Control (Piggyback Float Switch)\u003c\/strong\u003e\u003cbr\u003ePlug-and-play design allows direct connection to pumps without a control panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Capacity Ratings\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e15 amps Full Load Amps (FLA)\u003c\/li\u003e\n\u003cli\u003e90 amps Locked Rotor Amps (LRA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Pumping Range\u003c\/strong\u003e\u003cbr\u003eEasily set your operating range from 3\" to 48\", with extended ranges available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Operation in Turbulent Conditions\u003c\/strong\u003e\u003cbr\u003eNot sensitive to rotation or turbulence, making it ideal for wastewater systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Float Construction\u003c\/strong\u003e\u003cbr\u003eCorrosion-resistant polypropylene housing rated for use up to 140°F (60°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Clamps Included\u003c\/strong\u003e\u003cbr\u003eAllows secure and adjustable installation on discharge pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL and CSA Listed\u003c\/strong\u003e\u003cbr\u003eCertified for safety and performance across North America.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Year Manufacturer Warranty\u003c\/strong\u003e\u003cbr\u003eLong-term reliability backed by SJE Rhombus Controls \u0026amp; Alarms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Use a Dual Float Switch Instead of a Single Float?\u003c\/h2\u003e\n\u003cp\u003eA dual float switch provides a more controlled and reliable way to manage pump operation compared to a single float.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeparates pump ON and OFF levels for better control\u003c\/li\u003e\n\u003cli\u003eHelps prevent short cycling, reducing pump wear\u003c\/li\u003e\n\u003cli\u003eMaintains consistent operation in turbulent wastewater\u003c\/li\u003e\n\u003cli\u003eImproves pump lifespan and efficiency\u003c\/li\u003e\n\u003cli\u003eProvides a more accurate and adjustable pumping range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is especially important in sump pump systems, sewage systems, and lift stations, where water levels can fluctuate quickly.\u003c\/p\u003e\n\u003ch2\u003eHow the Double Float Switch Works\u003c\/h2\u003e\n\u003cp\u003eThis double float switch assembly consists of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eTop float → Activates the pump (turns ON)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBottom float → Deactivates the pump (turns OFF)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInside the system, a holding relay allows the floats to function in series, ensuring stable and reliable operation.\u003c\/p\u003e\n\u003cp\u003eThis design:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates pump chatter in turbulent conditions\u003c\/li\u003e\n\u003cli\u003eMaintains consistent pump cycles\u003c\/li\u003e\n\u003cli\u003eAllows precise control over liquid levels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe adjustable distance between the floats determines the pumping range, giving you flexibility based on tank depth and system requirements.\u003c\/p\u003e\n\u003ch2\u003ePiggyback Float Switch: Simple Direct Pump Control\u003c\/h2\u003e\n\u003cp\u003eThe piggyback float switch design makes installation simple:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug the float switch into the power outlet\u003c\/li\u003e\n\u003cli\u003ePlug the pump into the float switch\u003c\/li\u003e\n\u003cli\u003eThe switch controls the pump automatically\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis setup allows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo control panel required\u003c\/li\u003e\n\u003cli\u003eQuick installation\u003c\/li\u003e\n\u003cli\u003eEasy manual override (plug pump directly into outlet if needed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemporary systems\u003c\/li\u003e\n\u003cli\u003eBudget-conscious installations\u003c\/li\u003e\n\u003cli\u003eRetrofit applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThis dual float pump switch is suitable for a wide range of applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSump pump systems\u003c\/li\u003e\n\u003cli\u003eSewage and wastewater systems\u003c\/li\u003e\n\u003cli\u003eLift stations\u003c\/li\u003e\n\u003cli\u003eEffluent systems\u003c\/li\u003e\n\u003cli\u003eConfined tanks and pits\u003c\/li\u003e\n\u003cli\u003eResidential, commercial, and municipal installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt performs especially well in:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurbulent conditions\u003c\/li\u003e\n\u003cli\u003eNarrow or tight spaces\u003c\/li\u003e\n\u003cli\u003eSystems requiring a wide pumping range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDual Float Switch Options\u003c\/h2\u003e\n\u003cp\u003eThe SJE Double FloatMaster is available in multiple configurations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump Down (Normally Open) – for emptying tanks\u003c\/li\u003e\n\u003cli\u003ePump Up (Normally Closed) – for filling applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAvailable with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e120V or 240V piggyback plug\u003c\/li\u003e\n\u003cli\u003eDirect wiring (no plug)\u003c\/li\u003e\n\u003cli\u003eCable lengths: 15 ft, 20 ft, 30 ft (longer lengths available)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V \/ 240V (50\/60 Hz, single phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Run Current\u003c\/td\u003e\n\u003ctd\u003e15 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Start Current\u003c\/td\u003e\n\u003ctd\u003e90 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePumping Range\u003c\/td\u003e\n\u003ctd\u003e3\" to 48\" (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Material\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (corrosion-resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Temperature\u003c\/td\u003e\n\u003ctd\u003e140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable (Float)\u003c\/td\u003e\n\u003ctd\u003e18 gauge, 2-conductor SJOW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable (Above Splice)\u003c\/td\u003e\n\u003ctd\u003e14 gauge, 3-conductor SJTW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL, CSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg alt=\"SJE Double Float®\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Double_Float.png?v=1774772989\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg alt=\"Rhombus Double FloatMaster\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Rhombus_Double_FloatMaster_480x480.png?v=1774772873\"\u003e\u003c\/div\u003e\n\u003cp\u003eImportant Notes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMust be used with pumps that provide integral thermal overload protection\u003c\/li\u003e\n\u003cli\u003eDesigned for horsepower (HP) rated loads only\u003c\/li\u003e\n\u003cli\u003eNot suitable for low-current control (pilot duty) applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation \u0026amp; Wiring Overview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure power supply voltage matches switch rating (120V or 240V)\u003c\/li\u003e\n\u003cli\u003eFor piggyback setup: plug the switch into the outlet, plug the pump into the switch\u003c\/li\u003e\n\u003cli\u003eFor direct wiring: follow the appropriate wiring diagram and code requirements\u003c\/li\u003e\n\u003cli\u003eFloats should be mounted properly for correct operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor detailed wiring, refer to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSJE Rhombus float switch wiring diagrams\u003c\/li\u003e\n\u003cli\u003eInstallation instructions provided with the product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg alt=\"SJE Rhombus Double FloatMaster™\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_Double_FloatMaster_480x480.png?v=1774772707\"\u003e\u003c\/div\u003e\n\u003ch2\u003eRelated Float Switches and Pump Control Solutions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-pumpmaster-plus-15-amp-wide-angle-piggyback-plug-pump-float-switch-120-240v\"\u003eSJE PumpMaster Plus Float Switch\u003c\/a\u003e\u003c\/strong\u003e – A single float switch option for simpler pump control applications where a dual float switch is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/float-switches-and-accessories\"\u003eFloat Switches \u0026amp; Accessories\u003c\/a\u003e\u003c\/strong\u003e – Find cable weights, mounting brackets, and additional float switch options to customize your system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/tank-alarm-systems\"\u003eTank Alarm Systems\u003c\/a\u003e\u003c\/strong\u003e – Monitor water levels and system performance with compatible alarm panels and accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOrder SJE Double Float® Master Pump Switch Piggyback from Cleanflow\u003c\/h2\u003e\n\u003cp\u003eUpgrade your system with a proven SJE Rhombus Double Float® Master Pump designed for reliable pump control in demanding environments.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e supplies \u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus Controls \u0026amp; Alarms products\u003c\/a\u003e across Canada and the USA, offering:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompetitive pricing\u003c\/li\u003e\n\u003cli\u003eFast and reliable shipping\u003c\/li\u003e\n\u003cli\u003eTrusted industrial-grade products\u003c\/li\u003e\n\u003cli\u003eExpert customer support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrder your double float switch today and get reliable pump control where it matters most.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/FAQPage\" itemscope=\"\"\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is a double float switch?\u003c\/h3\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA double float switch uses two floats to control pump ON and OFF levels separately, providing more accurate and stable pump operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow does a piggyback float switch work?\u003c\/h3\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA piggyback float switch plugs into a power outlet, and the pump plugs into the switch. The switch controls power to the pump automatically.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhy use a dual float switch instead of a single float?\u003c\/h3\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eDual float switches reduce pump cycling, improve control accuracy, and perform better in turbulent conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is pump up vs pump down?\u003c\/h3\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003ePump down: empties a tank (normally open)\u003c\/li\u003e\n\u003cli\u003ePump up: fills a tank (normally closed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan this float switch be used without a control panel?\u003c\/h3\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. The piggyback design allows direct pump control without a control panel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat wiring diagram should I follow?\u003c\/h3\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eFollow the SJE Rhombus wiring diagram for your voltage (120V or 240V). Always ensure voltage compatibility before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat size pumps can this double float switch control?\u003c\/h3\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe SJE Double FloatMaster is designed to control pumps up to 15 FLA (Full Load Amps) and 90 LRA (Locked Rotor Amps) for both 120V and 240V systems. This makes it suitable for many residential and light commercial sump and sewage pump applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThis switch must be used with pumps that provide integral thermal overload protection.\u003c\/p\u003e\n\u003cp\u003eA Pump Switch is designed for Horsepower (HP) rated loads and is not suitable for control (pilot duty) applications. It will fail prematurely when switching loads less than 1 Amp at 120 VAC. Select a float switch from our Control Switch offering for control applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"120V \/ 15 Feet","offer_id":10601496260,"sku":"1016864","price":211.84,"currency_code":"CAD","in_stock":true},{"title":"120V \/ 20 Feet","offer_id":31660019580989,"sku":"1017660","price":219.75,"currency_code":"CAD","in_stock":true},{"title":"120V \/ 30 Feet","offer_id":10601496324,"sku":"1017664","price":236.65,"currency_code":"CAD","in_stock":true},{"title":"240V \/ 15 Feet","offer_id":40574559977533,"sku":"1017657","price":217.55,"currency_code":"CAD","in_stock":true},{"title":"240V \/ 20 Feet","offer_id":40574560010301,"sku":"1017661","price":225.47,"currency_code":"CAD","in_stock":true},{"title":"240V \/ 30 Feet","offer_id":40574560043069,"sku":"1017665","price":242.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_Double_FloatMaster.jpg?v=1774773228"},{"product_id":"sje-pumpmaster-spdt-13-amp-three-wire-wide-angle-pump-float-switch","title":"SJE PumpMaster® SPDT 13 Amp Wide Angle Pump Float Switch, Three-Wire Setup for 120\/240V Pumps, Adjustable 7\"-36\" Range","description":"\u003ch1\u003eSJE PumpMaster® SPDT 13 Amp Wide Angle Pump Float Switch, Three-Wire Setup for 120\/240V Pumps, Adjustable 7\"-36\" Range\u003c\/h1\u003e\n\n\u003ch2\u003eMechanically-Activated Wide Angle Float Switch for Automatic Pump Control\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eSJE PumpMaster SPDT sump pump float switch\u003c\/strong\u003e is a professional-grade, wide-angle float switch designed for reliable automatic pump control in demanding water and wastewater systems. Built with a 3-wire float switch (SPDT) configuration, this unit can be wired for both pump-up and pump-down applications, making it one of the most versatile pump float switches available.\u003c\/p\u003e\n\n\u003cp\u003eCleanflow ships across Canada and the USA with fast, reliable delivery so you get the float switch you need, when you need it.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Is an SPDT Float Switch?\u003c\/h2\u003e\n\n\u003cp\u003eAn SPDT (Single Pole Double Throw) float switch allows you to control two different pump actions using one device:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Down (Normally Open)\u003c\/strong\u003e – Drains water from a tank or sump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Up (Normally Closed)\u003c\/strong\u003e – Fills a tank or basin\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis means one sump pump float switch can handle both operations depending on how it’s wired, reducing the need for multiple switches and simplifying your system.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This SJE PumpMaster Float Switch Does\u003c\/h2\u003e\n\n\u003cp\u003eThis float switch automatically turns your pump on or off based on liquid level inside a tank or pit. As the float rises and falls with water or sewage levels, it activates internal contacts to control pump operation.\u003c\/p\u003e\n\n\u003cp\u003eIt is commonly used in:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSeptic tanks and sewage pits\u003c\/li\u003e\n\u003cli\u003eLift stations and wastewater systems\u003c\/li\u003e\n\u003cli\u003eWater storage tanks\u003c\/li\u003e\n\u003cli\u003eIndustrial liquid handling systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUnlike basic float switches, the \u003cstrong\u003eSJE PumpMaster SPDT\u003c\/strong\u003e is designed for direct pump control, not just signal or control panel applications.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Demanding Pump Applications\u003c\/h2\u003e\n\n\u003cp\u003eThe SJE PumpMaster is designed for real-world pump loads—not light-duty control circuits.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum running current:\u003c\/strong\u003e 13 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum starting current:\u003c\/strong\u003e 85 amps\u003c\/li\u003e\n\u003cli\u003eHandles pumps up to:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2 HP at 120V\u003c\/li\u003e\n\u003cli\u003e1 HP at 230V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis makes it a strong choice for:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eWastewater systems\u003c\/li\u003e\n\u003cli\u003eSewage applications\u003c\/li\u003e\n\u003cli\u003eHigh-load pump environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUnlike cheaper switches, this unit is built to handle the surge current when pumps start.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Harsh \u0026amp; Turbulent Environments\u003c\/h2\u003e\n\n\u003cp\u003eThis SJE PumpMaster float switch is not affected by turbulence or rotation, allowing it to perform reliably in:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSewage pits with constant agitation\u003c\/li\u003e\n\u003cli\u003eLift stations with high flow\u003c\/li\u003e\n\u003cli\u003eIndustrial tanks with movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIts high-impact, corrosion-resistant PVC housing is rated for use in water and sewage up to 140°F (60°C).\u003c\/p\u003e\n\n\u003ch2\u003eAdjustable Pumping Range (7\" to 36\")\u003c\/h2\u003e\n\n\u003cp\u003eThe wide-angle design allows for an adjustable pumping range between 7 inches and 36 inches, depending on tether length.\u003c\/p\u003e\n\n\u003cp\u003eWhy this matters:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eReduces pump short cycling\u003c\/li\u003e\n\u003cli\u003eExtends pump life\u003c\/li\u003e\n\u003cli\u003eImproves system efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eLonger tether = wider pump cycle\u003c\/p\u003e\n\u003cp\u003eShorter tether = tighter control\u003c\/p\u003e\n\n\u003ch2\u003eElectrical \u0026amp; Installation Overview\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 120V \/ 230V (single phase)\u003c\/li\u003e\n\u003cli\u003e3-wire configuration (SPDT)\u003c\/li\u003e\n\u003cli\u003eDirect wiring required (no plug)\u003c\/li\u003e\n\u003cli\u003eFlexible 16-gauge, 3-conductor cable (SJOW, water-resistant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eMust be wired in a dry junction box\u003c\/li\u003e\n\u003cli\u003ePump voltage and switch voltage must match\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended\u003c\/li\u003e\n\u003cli\u003eMust be used with pumps that have thermal overload protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHeavy-Duty Construction\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eHigh-impact PVC float housing\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting clamp included\u003c\/li\u003e\n\u003cli\u003eDesigned for long-term use in harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e⚠️ Important Usage Notes\u003c\/h2\u003e\n\n\u003cp\u003eThis is critical (and often missed):\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eDesigned for \u003cstrong\u003eHP-rated pump loads only\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNOT suitable for:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003elow-current applications (\u0026lt;1 amp)\u003c\/li\u003e\n\u003cli\u003econtrol\/pilot duty systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUsing it outside its intended application can cause premature failure.\u003c\/p\u003e\n\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eCable lengths:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e15 ft\u003c\/li\u003e\n\u003cli\u003e20 ft\u003c\/li\u003e\n\u003cli\u003e30 ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eDirect wire models only (SPDT configuration)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch Type\u003c\/td\u003e\n\u003ctd\u003eSPDT (3-wire) wide-angle float switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V \/ 230V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Running Current\u003c\/td\u003e\n\u003ctd\u003e13 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Starting Current\u003c\/td\u003e\n\u003ctd\u003e85 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 1\/2 HP (120V), 1 HP (230V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePumping Range\u003c\/td\u003e\n\u003ctd\u003e7\" – 36\" adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e16 gauge, 3-conductor SJOW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Material\u003c\/td\u003e\n\u003ctd\u003eHigh-impact PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Temperature\u003c\/td\u003e\n\u003ctd\u003e140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eWater, sewage, wastewater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"text-align: -webkit-left;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_PumpMaster_SPDT_13.png?v=1774612730\" alt=\"SJE PumpMaster® SPDT 13\"\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFast Shipping Across Canada \u0026amp; the USA\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e supplies the SJE PumpMaster SPDT pump float switch across Canada and the United States with fast, reliable shipping. Need help choosing the right float switch? Our team can help.\u003c\/p\u003e\n\n\u003cp\u003eLooking for \u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003e\u003cstrong\u003eSJE Rhombus controls \u0026amp; alarms\u003c\/strong\u003e\u003c\/a\u003e? We carry a full range of pump control solutions.\u003c\/p\u003e\n\n\u003ch2\u003eExpand Your Pump Control System\u003c\/h2\u003e\n\n\u003cp\u003eLooking to complete your system or simplify installation? These related products work seamlessly with the SJE PumpMaster float switch:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-pumpmaster-plus-15-amp-wide-angle-piggyback-plug-pump-float-switch-120-240v\"\u003e\u003cstrong\u003eSJE PumpMaster Plus Float Switch (Piggyback Plug)\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\nIdeal for plug-and-play installations where hardwiring isn’t required. Perfect for quick replacements and residential pump setups.\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/collections\/float-switches-and-accessories\"\u003e\u003cstrong\u003eFloat Switches \u0026amp; Pump Accessories\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\nBrowse float switches, mounting clamps, cable weights, and accessories to customize your system and improve performance.\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/collections\/tank-alarm-systems\"\u003e\u003cstrong\u003eTank Alarm Systems for High\/Low Level Monitoring\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\nAdd a high water alarm or control panel to monitor liquid levels and prevent overflows, pump failure, or system damage.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is an SPDT float switch?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eAn SPDT (Single Pole Double Throw) float switch allows you to control a pump in either pump-up or pump-down operation, depending on how it is wired.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the difference between pump up and pump down?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump down:\u003c\/strong\u003e empties a tank when liquid rises\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump up:\u003c\/strong\u003e fills a tank when liquid drops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan this float switch be used in septic systems?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, the SJE PumpMaster float switch is designed for both water and sewage applications and works well in septic tanks and lift stations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat voltage does this switch support?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt supports both 120V and 230V single-phase pump systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes this float switch come with a plug?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo. SPDT models are designed for direct wiring only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow do I adjust the pumping range?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe pumping range is adjusted by changing the tether length, typically between 7\" and 36\".\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan this switch handle heavy-duty pumps?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, it supports up to 85 amps starting current, making it suitable for demanding pump applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs this suitable for low-current control systems?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo. This switch is designed for pump loads and should not be used in low-current (\u0026lt;1 amp) control applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"15 Feet","offer_id":39453378707517,"sku":"1004836","price":101.91,"currency_code":"CAD","in_stock":true},{"title":"20 Feet","offer_id":10602415620,"sku":"1004838","price":107.43,"currency_code":"CAD","in_stock":true},{"title":"30 Feet","offer_id":10602415684,"sku":"1004840","price":113.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_PumpMaster_SPDT_13.jpg?v=1774612752"},{"product_id":"sje-verticalmaster-3-plus-piggyback-sump-pump-float-switch-assembly-120-240v-1-2-to-1-hp-non-mercury-stainless-steel-bracket-ul-csa-approved","title":"SJE VerticalMaster 3 Plus Piggyback Sump Pump Float Switch Assembly, 1\/2 HP, Non-Mercury, Stainless Steel Bracket, UL\/CSA Approved","description":"\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cp\u003eThis pump control float switch is suitable for a wide range of non-potable water applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eResidential sump pump systems\u003c\/li\u003e\n\u003cli\u003eBasement drainage systems\u003c\/li\u003e\n\u003cli\u003eSewage and effluent pits\u003c\/li\u003e\n\u003cli\u003eSeptic systems\u003c\/li\u003e\n\u003cli\u003eLaundry tray pumps\u003c\/li\u003e\n\u003cli\u003eUtility pump chambers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether you need a septic float switch, sewage float switch, or general water level float switch, this model offers dependable performance across multiple applications.\u003c\/p\u003e\n\u003ch2\u003eInstallation \u0026amp; Compatibility of SJE VerticalMaster® 3 Plus Pump Switch\u003c\/h2\u003e\n\u003cp\u003eThis sump pump float switch replacement is easy to install, whether you’re a homeowner or a contractor.\u003c\/p\u003e\n\u003ch3\u003eSimple Plug-In Installation (Piggyback Option)\u003c\/h3\u003e\n\u003cp\u003eThe piggyback float switch version plugs directly into your outlet. Then, you plug your sump pump into the switch.\u003c\/p\u003e\n\u003cp\u003eNo wiring is required. Your pump will turn on and off automatically with the water level.\u003c\/p\u003e\n\u003ch3\u003eEasy Mounting in the Sump Pit\u003c\/h3\u003e\n\u003cp\u003eThe switch mounts securely to your pump’s discharge pipe using the included bracket and hose clamp. This keeps the float stable and properly positioned during operation.\u003c\/p\u003e\n\u003ch3\u003eCompatibility Notes (Important)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with pumps up to:\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eUp to 1\/2 HP at 120V\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for pump-down applications (used to empty water)\u003c\/li\u003e\n\u003cli\u003eMust be used with pumps with built-in thermal overload protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVertical sump pump float switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePumping Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable from 2\" to 6.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Run Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Start Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e78 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 1\/2 HP (120V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSwitch Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMechanically activated (non-mercury)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16-gauge, water-resistant (SJOW\/SJTOW, CPE jacket)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHousing Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-impact, corrosion-resistant PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBracket with hose clamp (pipe-mounted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePump-down (emptying) applications only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg alt=\"SJE VerticalMaster 3\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_VerticalMaster_480x480.png?v=1774784117\"\u003e \u003cimg alt=\"SJE VerticalMaster 3\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_VerticalMaster_3_480x480.png?v=1774784124\"\u003e \u003c\/p\u003e\n\u003ch2\u003eExplore Compatible Float Switches, Pumps \u0026amp; Alarm Systems\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-pumpmaster-plus-15-amp-wide-angle-piggyback-plug-pump-float-switch-120-240v\"\u003eSJE PumpMaster Plus Float Switch\u003c\/a\u003e\u003c\/strong\u003e – Prefer a wide-angle sump pump float switch instead? The PumpMaster Plus is ideal for standard sump pit applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/float-switches-and-accessories\"\u003eFloat Switches \u0026amp; Accessories\u003c\/a\u003e\u003c\/strong\u003e – Browse our full selection of float switches for sump pumps, including cable weights, mounting brackets, and replacement parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/tank-alarm-systems\"\u003eTank Alarm Systems\u003c\/a\u003e\u003c\/strong\u003e – Pair your system with high\/low water alarms for added protection and monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/hydromatic-va1-10-cast-iron-sump-pump-3-10-hp-120v-vertical-piggyback-float-switch-thermal-overload-protection-1-1-2-npt-oil-filled-motor\"\u003eHydromatic VA110 Sump Pump\u003c\/a\u003e\u003c\/strong\u003e – A popular sump pump option used with float switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUpgrade or Replace Your Sump Pump Float Switch\u003c\/h2\u003e\n\u003cp\u003eLooking to replace a faulty sump pump float switch or upgrade your system? The SJE VerticalMaster 3 Plus vertical float switch is designed for tight sump pits and confined spaces.\u003c\/p\u003e\n\u003cp\u003eThis piggyback float switch automatically controls your pump based on water level, helping prevent flooding and reduce wear on your system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e supplies this pump switch across Canada and the United States with fast, reliable shipping.\u003c\/p\u003e\n\u003ch3\u003eLooking for SJE Rhombus Controls \u0026amp; Alarms?\u003c\/h3\u003e\n\u003cp\u003eCleanflow also carries a full range of \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus controls, alarms, and float switches\u003c\/a\u003e\u003c\/strong\u003e for pump systems.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/FAQPage\" itemscope=\"\"\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a vertical float switch used for?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA vertical float switch is used in sump pumps and water systems where space is limited. It moves up and down instead of swinging, making it ideal for tight sump pits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhen should I use a vertical float switch instead of a wide-angle switch?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eUse a vertical float switch when your sump pit is too small for a tethered float to move freely, or when you want more precise control of water levels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this SJE VerticalMaster pump switch replace my existing sump pump float switch?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, this sump pump float switch replacement is compatible with most pumps up to 1\/2 HP (120V).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a piggyback float switch?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA piggyback float switch plugs into a power outlet, and your pump plugs into the switch. It allows automatic operation without wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this suitable for sewage or septic systems?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, this sewage float switch is designed for non-potable water applications, including septic and effluent systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow does a sump pump float switch work?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe float rises with the water level, turning the pump on. When the water level drops, the switch automatically turns the pump off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this be hardwired instead of a plug-in?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThis model is supplied with a piggyback plug for easy installation and is not intended for direct wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"120VAC \/ 10' Cable Length","offer_id":10602422212,"sku":"1076764","price":136.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_VerticalMaster_3.jpg?v=1774784293"},{"product_id":"sje-stainless-steel-four-float-bracket","title":"SJE Stainless Steel Four-Float Bracket for Pump Control Systems","description":"\u003ch2\u003eReliable Float Switch Mounting for Wastewater \u0026amp; Pump Systems\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSJE Stainless Steel Four-Float Bracket\u003c\/strong\u003e is designed to securely mount and organize float switches in pump control systems. It’s commonly used in sewage lift stations, sump pits, and wastewater systems where accurate float positioning is critical for reliable operation.\u003c\/p\u003e\n\n\u003cp\u003eBy keeping float switches properly spaced and supported, this bracket helps prevent tangling, reduces cable strain, and ensures consistent pump performance. Whether you’re installing a new system or upgrading an existing setup, this float switch bracket provides a clean, dependable solution.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Does a Float Switch Bracket Do?\u003c\/h2\u003e\n\n\u003cp\u003eA float switch bracket provides a fixed mounting point for multiple float switches inside a tank or wet well. Instead of letting floats hang freely and potentially tangle, the bracket keeps them organized and positioned correctly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThis ensures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eAccurate liquid level detection\u003c\/li\u003e\n\u003cli\u003eProper pump activation and shutoff\u003c\/li\u003e\n\u003cli\u003eReduced risk of system failure or short cycling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSJE Four-Float Bracket Key Features \u0026amp; Benefits\u003c\/h2\u003e\n\n\u003ch3\u003eSupports Up to Four Float Switches\u003c\/h3\u003e\n\u003cp\u003eDesigned for multi-stage pump control systems, this bracket can hold up to four float switches. This allows you to manage pump on\/off cycles, lag pumps, and high-level alarms within a single, organized setup.\u003c\/p\u003e\n\n\u003ch3\u003eCorrosion-Resistant Stainless Steel Construction\u003c\/h3\u003e\n\u003cp\u003eMade from 300 series stainless steel, this float switch mounting bracket is built to withstand harsh environments, including sewage, wastewater, and industrial applications.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt-In Cord Strain Relief Connectors\u003c\/h3\u003e\n\u003cp\u003eIncludes four UL-recognized strain relief connectors to protect cables from wear and damage. This helps extend the lifespan of your float switches and ensures reliable long-term operation.\u003c\/p\u003e\n\n\u003ch3\u003eFlexible Mounting Options\u003c\/h3\u003e\n\u003cp\u003eInstall directly onto the tank wall, or use the included mounting device to create additional offset. This flexibility allows for better float movement and improved system performance.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible with Standard Float Switch Cables\u003c\/h3\u003e\n\u003cp\u003eDesigned to accommodate SJOW and SJTW cords (18\/2, 18\/3, 16\/2, 16\/3), making it compatible with most common float switches used in pump control systems.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\n\u003cp\u003eThis float switch bracket is widely used in:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSewage lift stations\u003c\/li\u003e\n\u003cli\u003eWastewater treatment systems\u003c\/li\u003e\n\u003cli\u003eSump pump systems\u003c\/li\u003e\n\u003cli\u003eSeptic systems\u003c\/li\u003e\n\u003cli\u003eIndustrial pump control setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAnywhere multiple float switches need to be securely mounted and properly spaced, this bracket provides a reliable solution.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Proper Float Switch Mounting Matters\u003c\/h2\u003e\n\n\u003cp\u003eIncorrect float placement can lead to serious system issues, including pump short cycling, inaccurate level control, or even overflow conditions.\u003c\/p\u003e\n\n\u003cp\u003eUsing a dedicated float switch mounting bracket helps:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eEnsure consistent float movement\u003c\/li\u003e\n\u003cli\u003eMaintain accurate activation levels\u003c\/li\u003e\n\u003cli\u003ePrevent cable tangling and interference\u003c\/li\u003e\n\u003cli\u003eImprove overall system reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor any wastewater or pump control system, proper float positioning is essential, and this bracket makes it easy to get it right.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Overview\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eMount the bracket to the tank wall using appropriate hardware\u003c\/li\u003e\n\u003cli\u003eAttach float switch cables using the included strain relief connectors\u003c\/li\u003e\n\u003cli\u003eAdjust tether lengths based on desired activation levels\u003c\/li\u003e\n\u003cli\u003eEnsure floats have enough clearance for unrestricted movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eProper installation helps maximize performance and ensures long-term reliability in demanding environments.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Stainless_Steel_Four_Float_Bracket.png?v=1775567409\" alt=\"SJE Stainless Steel Four Float Bracket\"\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e300 series stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003eSupports up to 4 float switches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Compatibility\u003c\/td\u003e\n\u003ctd\u003eSJOW \u0026amp; SJTW cords (18\/2, 18\/3, 16\/2, 16\/3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Components\u003c\/td\u003e\n\u003ctd\u003e4 strain relief connectors, mounting device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Options\u003c\/td\u003e\n\u003ctd\u003eDirect wall mount or offset mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOrder the SJE Stainless Steel Four-Float Bracket Today\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e is a trusted supplier of pump control components, float switches, and wastewater system accessories for municipal, commercial, and industrial applications. We stock and ship across Canada and the USA, helping you get the products you need quickly and reliably.\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re installing a new system or upgrading an existing setup, the \u003cstrong\u003eSJE Stainless Steel Four-Float Bracket\u003c\/strong\u003e provides a reliable solution for organizing and mounting float switches in demanding environments.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLooking for more control solutions?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCleanflow also carries a full range of \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus controls and alarms\u003c\/a\u003e\u003c\/strong\u003e, including float switches, control panels, and monitoring equipment designed for wastewater and pump systems.\u003c\/p\u003e\n\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a float switch bracket used for?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA float switch bracket is used to securely mount and position float switches in a pump system, ensuring accurate liquid level control and reliable pump operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow many float switches can this bracket hold?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThis bracket supports up to four float switches, making it ideal for multi-stage pump control systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhere is this bracket typically used?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt is commonly used in sewage lift stations, sump systems, septic tanks, and wastewater treatment applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhy is proper float spacing important?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eProper spacing ensures accurate pump activation levels and prevents issues like short cycling, overflow, or system failure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this bracket suitable for corrosive environments?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, it is made from 300 series stainless steel, which provides excellent corrosion resistance in wastewater and industrial environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes this bracket help protect float switch cables?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, it includes strain relief connectors that reduce cable stress and help extend the life of your float switches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"Default Title","offer_id":28547536224317,"sku":"1009432","price":97.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Stainless_Steel_Four.jpg?v=1775567571"},{"product_id":"sje-cord-seals","title":"SJE Float Switch Cord Seals for Junction Boxes – Watertight Cable Entry Seal (4 or 6 Cable Models)","description":"\u003ch2\u003eReliable Watertight Cable Sealing for Float Switch and Control Panel Applications\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSJE float switch cord seal\u003c\/strong\u003e provides a secure, watertight solution for sealing cables entering electrical junction boxes and control panels. Designed for wastewater systems, lift stations, and pump control applications, this cord seal prevents moisture, gases, and contaminants from entering enclosures and damaging electrical components.\u003c\/p\u003e\n\n\u003cp\u003eUnlike traditional sealing methods, such as duct seal or silicone, this SJE neoprene cord seal delivers cleaner, more reliable installation while maintaining long-term performance in demanding environments.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Does a Float Switch Cord Seal Do?\u003c\/h2\u003e\n\n\u003cp\u003eA float switch cord seal is used to seal cables where they enter a junction box or control panel. It creates a tight barrier around wires, preventing water and gases from entering the enclosure, while also providing strain relief to protect the cables.\u003c\/p\u003e\n\n\u003cp\u003eThis helps:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eProtect electrical connections from moisture damage\u003c\/li\u003e\n\u003cli\u003ePrevent corrosion and system failure\u003c\/li\u003e\n\u003cli\u003eMaintain safe and reliable pump control operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSJE Float Switch Cord Seal Key Features \u0026amp; Benefits\u003c\/h2\u003e\n\n\u003ch3\u003eWatertight Cable Seal\u003c\/h3\u003e\n\u003cp\u003eCreates a liquid-tight barrier that prevents water and contaminants from entering electrical enclosures, keeping connections dry and protected.\u003c\/p\u003e\n\n\u003ch3\u003eNeoprene Compression Sealing System\u003c\/h3\u003e\n\u003cp\u003eThe neoprene plug compresses around cables when tightened, forming a secure and durable seal inside the terminal adapter.\u003c\/p\u003e\n\n\u003ch3\u003eSupports Multiple Float Switch Cables\u003c\/h3\u003e\n\u003cp\u003eAvailable in configurations that accommodate up to four or six cables, reducing the need for multiple entry points.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt-In Strain Relief\u003c\/h3\u003e\n\u003cp\u003eHelps prevent cable wear and damage by securing wires as they enter the enclosure.\u003c\/p\u003e\n\n\u003ch3\u003ePVC Plugs for Unused Cable Positions\u003c\/h3\u003e\n\u003cp\u003eUnused holes can be sealed using the included plugs to maintain a watertight connection.\u003c\/p\u003e\n\n\u003ch3\u003eGround Wire Attachment\u003c\/h3\u003e\n\u003cp\u003eIncludes a ground wire connected to a stainless steel compression plate for added safety.\u003c\/p\u003e\n\n\u003ch3\u003eCorrosion-Resistant Construction\u003c\/h3\u003e\n\u003cp\u003eBuilt with neoprene seals and stainless steel hardware for long-term durability in wastewater and industrial environments.\u003c\/p\u003e\n\n\u003ch2\u003eAvailable Models\u003c\/h2\u003e\n\n\u003ch3\u003eFour Cable Cord Seal (SJE Part #1008517)\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSJE float switch cord seal\u003c\/strong\u003e is designed to securely seal up to four float switch cables entering a junction box or control panel. Ideal for lift stations and wastewater systems, this watertight cable seal fits into the hub (female) end of any 1 1\/2\" IPS fitting or inside Schedule 40 or 80 IPS pipes. Tightening the compression nut activates the neoprene seal, creating a reliable barrier that prevents moisture and contaminants from entering the enclosure.\u003c\/p\u003e\n\n\u003ch3\u003eSix Cable Cord Seal (SJE Part #1037126)\u003c\/h3\u003e\n\u003cp\u003eThis \u003cstrong\u003eSJE neoprene cord seal\u003c\/strong\u003e accommodates up to six float switch cables, making it ideal for multi-pump or duplex systems. It fits into the hub end of any 2\" IPS fitting and provides a secure junction box cable seal for larger installations. Like the four-cable model, tightening the nut compresses the neoprene plug around the cables, forming a durable, watertight seal that protects electrical components.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Material\u003c\/td\u003e\n\u003ctd\u003eNeoprene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless steel washers, nut, and bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Types\u003c\/td\u003e\n\u003ctd\u003eSJOW, SJTW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Sizes\u003c\/td\u003e\n\u003ctd\u003e18\/2, 18\/3, 16\/2, 16\/3, 14\/2, 14\/3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Capacity\u003c\/td\u003e\n\u003ctd\u003e1–4 or 1–6 cables, depending on model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eJunction boxes, control panels, lift stations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Float_Switch_Cord_Seals_480x480.png?v=1775569348\" alt=\"SJE Float Switch Cord Seals\"\u003e\n\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\n\u003cp\u003eThis electrical junction box cord seal is commonly used in:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSewage lift stations\u003c\/li\u003e\n\u003cli\u003eWastewater treatment systems\u003c\/li\u003e\n\u003cli\u003eSump pump control panels\u003c\/li\u003e\n\u003cli\u003eElectrical junction boxes\u003c\/li\u003e\n\u003cli\u003eIndustrial control systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIt is ideal anywhere multiple float switch cables need to be sealed and protected.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Proper Cable Sealing Matters\u003c\/h2\u003e\n\n\u003cp\u003eImproperly sealed cable entry points can allow water, moisture, and gases to enter electrical enclosures. This can lead to:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eCorrosion of electrical components\u003c\/li\u003e\n\u003cli\u003eShort circuits and system failure\u003c\/li\u003e\n\u003cli\u003eIncreased maintenance and downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUsing a watertight cable seal for junction boxes ensures long-term reliability and protects critical pump control systems.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Overview\u003c\/h2\u003e\n\n\u003cp\u003eInstalling the cord seal is simple and effective:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eInsert the cord seal into the terminal adapter or hub assembly\u003c\/li\u003e\n\u003cli\u003eFeed cables through the neoprene openings\u003c\/li\u003e\n\u003cli\u003eTighten the compression nut to create a watertight seal\u003c\/li\u003e\n\u003cli\u003eUse included PVC plugs to seal unused openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eTightening the nut compresses the neoprene plug to prevent gas and moisture from entering the panel.\u003c\/p\u003e\n\n\u003ch2\u003eOrder the SJE Float Switch Cord Seal\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e supplies \u003cstrong\u003eSJE float switch cord seals\u003c\/strong\u003e for junction boxes and control panels, with fast shipping across Canada and the USA.\u003c\/p\u003e\n\n\u003cp\u003eWhether you're installing or upgrading a pump control system, these cord seals provide a reliable solution for protecting electrical connections in wastewater and industrial environments.\u003c\/p\u003e\n\n\u003cp\u003eLooking for complete system components?\u003c\/p\u003e\n\n\u003cp\u003eCleanflow also offers a full range of \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus float switches, control panels, and accessories\u003c\/a\u003e\u003c\/strong\u003e to support your installation.\u003c\/p\u003e\n\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is an SJE float switch cord seal used for?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt is used to create a watertight seal around cables entering a junction box or control panel, protecting electrical components from moisture and contaminants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this cord seal waterproof?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, the neoprene compression system creates a liquid-tight seal when properly installed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow many cables can it hold?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eDepending on the model, it can hold between one and six cables.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this replace duct seal or silicone?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, it provides a cleaner, more reliable alternative to traditional sealing methods.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat happens if not all cable holes are used?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eUnused openings can be sealed using the included PVC plugs to maintain a watertight seal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat types of cables are compatible?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt is compatible with SJOW and SJTW cables in sizes ranging from 18\/2 to 14\/3.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow do you seal cables in a junction box?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eTo seal cables in a junction box, insert the cables through a cord seal installed in a terminal adapter, then tighten the compression nut. This compresses the neoprene seal around the cables, creating a watertight barrier that prevents moisture and gas from entering the enclosure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhere can I find SJE Float Switch Cord Seals for sale?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eSJE float switch cord seals for sale are available through authorized suppliers like Cleanflow. We stock both 2\" (1–4 cable) and 2.5\" (1–6 cable) models and ship across Canada and the USA for fast delivery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"2 inch Cord Seal (1 to 4 Cables)","offer_id":10602430980,"sku":"1008517","price":61.85,"currency_code":"CAD","in_stock":true},{"title":"2.5 inch Cord Seal (1 to 6 Cables)","offer_id":10602431044,"sku":"1037126","price":95.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/1011639.jpg?v=1730534832"},{"product_id":"sje-megamaster-non-mercury-pump-control-float-switch","title":"SJE MegaMaster® Narrow Angle Float Switch – SJE Rhombus Control Switch for Wastewater \u0026 Lift Stations (SPDT, Internal Weight)","description":"\u003ch2\u003eReliable SJE Rhombus Control Switch for Precise Liquid Level Control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSJE Rhombus MegaMaster® narrow-angle float switch\u003c\/strong\u003e is a mechanically activated control switch designed for accurate liquid level control in demanding environments. Commonly used as a lift station float switch, sewage float switch, or floating switch for water tanks, this unit delivers consistent performance where precise on\/off control is critical.\u003c\/p\u003e\n\u003cp\u003eDesigned with an internal weight and narrow activation angle, this SJE Rhombus control switch delivers consistent, repeatable operation without the need for external weights. It performs reliably in municipal lift stations, wastewater systems, and industrial tanks where accurate level control is essential.\u003c\/p\u003e\n\u003ch2\u003eKey Features of the SJE Rhombus Narrow Angle Float Switch\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNarrow-angle float switch design for precise liquid level control\u003c\/li\u003e\n\u003cli\u003eSPDT float switch wiring (normally open or normally closed) for flexible installation\u003c\/li\u003e\n\u003cli\u003eInternally weighted float – no external weights required\u003c\/li\u003e\n\u003cli\u003eGold cross-point contacts for reliable low-current switching (up to 1 amp)\u003c\/li\u003e\n\u003cli\u003eHigh-visibility two-color housing to easily identify float position\u003c\/li\u003e\n\u003cli\u003eDurable polypropylene construction for sewage and wastewater environments\u003c\/li\u003e\n\u003cli\u003eTear-drop float design improves buoyancy and stability\u003c\/li\u003e\n\u003cli\u003eUL \u0026amp; CSA approved for safe and reliable operation\u003c\/li\u003e\n\u003cli\u003eNon-mercury design for environmentally safe use\u003c\/li\u003e\n\u003cli\u003eMade in the USA with proven field performance\u003c\/li\u003e\n\u003cli\u003e5-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow the SJE Rhombus Narrow Angle Float Switch Works\u003c\/h2\u003e\n\u003cp\u003eThis SJE Rhombus narrow-angle float switch activates with a small change in liquid level, allowing for precise pump control in lift stations, sewage systems, and water tanks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (High-Level):\u003c\/strong\u003e The switch closes when the float tips slightly above horizontal, triggering the pump or alarm. It opens again as the float drops back down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (Low-Level):\u003c\/strong\u003e The switch closes when the float tips slightly below horizontal, typically used for low-level or pump-down control. It opens as the float rises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe internal weight keeps the switching action consistent, even in tight spaces or applications with grease, debris, or turbulent flow.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"SJE_MegaMaster\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_MegaMaster_Narrow_Angle_Float_Switch_480x480.png?v=1774966567\"\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch Type\u003c\/td\u003e\n\u003ctd\u003eSPDT (Single Pole Double Throw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Configuration\u003c\/td\u003e\n\u003ctd\u003eWhite = Common, Black = Normally Open, Red = Normally Closed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e18 AWG, 3-conductor SJOW, water-resistant (CPE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Material\u003c\/td\u003e\n\u003ctd\u003eHigh-impact polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Dimensions\u003c\/td\u003e\n\u003ctd\u003e4.03\" diameter × 6.62\" length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Water Depth\u003c\/td\u003e\n\u003ctd\u003e30 ft (13 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Electrical Load\u003c\/td\u003e\n\u003ctd\u003e1 amp, 125 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Electrical Load\u003c\/td\u003e\n\u003ctd\u003e1 mA, 4 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Rating\u003c\/td\u003e\n\u003ctd\u003eUp to 140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL \u0026amp; CSA approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg alt=\"Narrow Angle Float Switch\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Narrow_Angle_Float_Switch_480x480.png?v=1774966574\"\u003e \u003cimg alt=\"SJE Rhombus Narrow Angle Float Switch\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_Control_Switch_480x480.png?v=1774966575\"\u003e\u003c\/p\u003e\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLift station float switch systems (lead, lag, alarm, stop levels)\u003c\/li\u003e\n\u003cli\u003eSewage pump control systems\u003c\/li\u003e\n\u003cli\u003eWastewater treatment facilities\u003c\/li\u003e\n\u003cli\u003eWater storage tanks and non-potable systems\u003c\/li\u003e\n\u003cli\u003eIndustrial liquid level control setups\u003c\/li\u003e\n\u003cli\u003eAgricultural and construction dewatering systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is especially effective in systems with grease, debris, or fluctuating water levels, where consistent switching is critical.\u003c\/p\u003e\n\u003ch2\u003eInstallation \u0026amp; Setup Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaintain at least 12 inches of tether length for proper float movement\u003c\/li\u003e\n\u003cli\u003eEnsure the float has clear space to operate freely (no walls, pipes, or pumps interfering)\u003c\/li\u003e\n\u003cli\u003eAvoid placing the float in direct inflow or turbulent areas\u003c\/li\u003e\n\u003cli\u003eDo not run float switch cables in the same conduit as power cables\u003c\/li\u003e\n\u003cli\u003eUse a mounting bracket for structured multi-float systems (lead\/lag\/alarm setups)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCable lengths: \u003cstrong\u003e25 ft, 50 ft, 75 ft, 100 ft\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-stainless-steel-four-float-bracket\"\u003efloat mounting bracket\u003c\/a\u003e\u003c\/strong\u003e is available for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible Products \u0026amp; Accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/collections\/hcp-sewage-lift-station-pumps\"\u003eLift station pumps\u003c\/a\u003e for complete wastewater systems\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-stainless-steel-four-float-bracket\"\u003eFloat mounting brackets\u003c\/a\u003e for multi-level control setups\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/collections\/float-switches-and-accessories\"\u003eFloat switches\u003c\/a\u003e for alarm, lag, and lead configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cleanflow.net\/collections\/pump-lifting-equipment\"\u003ePump lifting equipment\u003c\/a\u003e for maintenance and installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Buy This SJE Rhombus Control Switch from Cleanflow\u003c\/h2\u003e\n\u003cp\u003eGet reliable performance from the SJE Rhombus MegaMaster® narrow-angle float switch, designed for precise liquid level control in lift stations, sewage systems, and water tanks. As a trusted supplier of SJE Rhombus control switches, alarms, and float systems, Cleanflow provides proven solutions for municipal, industrial, and commercial applications.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e ships across Canada and the USA, offering competitive pricing, fast shipping, and dependable product availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrowse our full range of \u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus Controls \u0026amp; Alarms\u003c\/a\u003e, including float switches, tank alarms, and pump control solutions.\u003c\/strong\u003e\u003c\/p\u003e\n\u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is a narrow-angle float switch used for?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eA narrow-angle float switch is used for precise liquid level control, especially in lift stations, sewage systems, and tanks, where small level changes need accurate switching.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan this be used as a lift station float switch?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes, this float switch is specifically designed for lift stations and is commonly used for pump control, alarm, and multi-float sequencing systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does SPDT mean on this float switch?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eSPDT (Single Pole Double Throw) means the switch can be wired as either normally open or normally closed, depending on your application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs this suitable for sewage systems?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes, this sewage float switch is built to handle harsh wastewater environments, including grease, debris, and fluctuating liquid levels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan this be used as a floating switch for a water tank?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes, it works effectively as a floating switch for water tanks, especially in non-potable or industrial applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes this float switch require an external weight?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eNo, it is internally weighted, which simplifies installation and ensures consistent operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow do I choose the right cable length?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eSelect a cable length based on the depth of your tank or pit. Deeper lift stations typically require longer cables (50–100 ft).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan this float switch be used in intrinsically safe or PLC-controlled systems?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes, the SJE Rhombus MegaMaster control switch is suitable for use in PLC (programmable logic controller) systems and intrinsically safe applications when installed according to applicable electrical codes. It is commonly used in municipal wastewater systems where low-current control signals are required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes this float switch require a specific mounting method or tether length?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes, proper installation is important for accurate operation. The float should be installed with a minimum tether length of 12 inches (30.5 cm) and must have enough clearance to move freely without contacting tank walls, pumps, or pipes. Avoid placing the float in turbulent or direct inflow areas to maintain consistent performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"SJE Rhombus","offers":[{"title":"25 Foot Cable","offer_id":39594864196,"sku":"1046500","price":106.87,"currency_code":"CAD","in_stock":true},{"title":"50 Foot Cable","offer_id":39594864388,"sku":"1046501","price":136.77,"currency_code":"CAD","in_stock":true},{"title":"75 Foot Cable","offer_id":39594864452,"sku":"1046502","price":175.38,"currency_code":"CAD","in_stock":true},{"title":"100 Foot Cable","offer_id":39594864580,"sku":"1046503","price":215.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_Narrow_Angle_Float_Switch.jpg?v=1774966671"},{"product_id":"sje-mushroom-anchor-10-lb","title":"Float Switch Anchor Mushroom Style – SJE 10 lb | Stable Float Switch Anchor for Tight Installations","description":"\u003ch2\u003eSJE Lead-Free Yellow Float Switch Anchor: Precision and Stability for Tight Spaces\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSJE Rhombus Lead-Free Yellow Float Switch Anchor\u003c\/strong\u003e is a 10 lb mushroom-style float switch anchor designed to provide reliable support for suspended float switches in confined pumping systems. Field-proven in municipal, utility, construction, and agricultural sectors, this \u003cstrong\u003eSJE Rhombus mushroom anchor\u003c\/strong\u003e is an ideal solution for duplex lift stations, small-diameter pits, and applications requiring multiple float switches. Its compact, rugged design helps maintain stable positioning for accurate pump control, even where space is limited.\u003c\/p\u003e\n\u003cp\u003eBest paired with a \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/316-stainless-steel-pump-lifting-chain-corrosion-resistant-for-submersible-pumps-sewage-stations-durable-secure-easy-maintenance-various-lengths\"\u003e316 stainless steel chain\u003c\/a\u003e\u003c\/strong\u003e, this pump float switch anchor is commonly used in tight wet wells or pits, where attaching float switches directly to discharge piping or walls isn’t practical. The float switch cables are securely fastened to the chain using tie wraps or cable ties, allowing precise on\/off elevations. For easy servicing, the entire assembly, anchor, chain, and float switches can be conveniently removed from the pit when needed.\u003c\/p\u003e\n\u003ch2\u003eKey Features of the SJE 10 lb Float Switch Anchor\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 lb Mushroom-Style Anchor:\u003c\/strong\u003e Optimized shape and weight provide stable, centralized support in small pits or tanks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead-Free Vinyl-Coated Design:\u003c\/strong\u003e Safe for all water applications and resistant to corrosion, wear, and chemical exposure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for Tight Installations:\u003c\/strong\u003e Perfect for duplex lift stations or pits where multiple float switches are needed in limited space\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService-Friendly Setup:\u003c\/strong\u003e Anchor, chain, and switches can be pulled out together for cleaning, adjusting, or replacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Stainless Steel Chain:\u003c\/strong\u003e Works with Type 316 stainless steel chain for secure, rust-resistant performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Float Switch Mounting:\u003c\/strong\u003e Use cable ties or plastic clamps to fasten switches directly to the chain at precise control elevations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow This Float Switch Anchor Improves System Performance\u003c\/h2\u003e\n\u003cp\u003eThis mushroom float switch anchor helps create a stable pivot point for suspended float switches, improving consistency in pump activation levels. Instead of relying on fixed mounting points, this setup allows flexible positioning while maintaining accurate float movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is especially useful in:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNarrow or deep pits\u003c\/li\u003e\n\u003cli\u003eInstallations with multiple float switches\u003c\/li\u003e\n\u003cli\u003eSystems where wall or pipe mounting is not practical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBy keeping floats properly spaced and stable, this float switch anchor helps ensure reliable pump cycling and reduces the risk of false triggering or inconsistent operation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Float Switch Anchor Mushroom Style\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Float_Switch_Anchor_Mushroom_Style.png?v=1775563025\"\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Float_Switch_Anchor_Mushroom_Style_7443f8e8-f93d-4b7d-9988-d74cd32fd066_480x480.png?v=1775563026\" alt=\"Float Switch Anchor Mushroom Style\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eTypical Configuration for Float Switch Positioning\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eHigh Water Alarm\u003c\/li\u003e\n\u003cli\u003ePump 2 Start\u003c\/li\u003e\n\u003cli\u003ePump 1 Start\u003c\/li\u003e\n\u003cli\u003ePump Off (Bottom Switch near Anchor)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRecommended Setup \u0026amp; Compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/pump-accessories\"\u003ePump Accessories\u003c\/a\u003e\u003c\/strong\u003e – View our full selection of float switches, control panels, alarms, and more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/pump-lifting-equipment\"\u003ePump Lifting Equipment\u003c\/a\u003e\u003c\/strong\u003e – Shop pump lifting tools, including stainless steel chain, clevises, shackles, and lifting eyes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/316-stainless-steel-pump-lifting-chain-corrosion-resistant-for-submersible-pumps-sewage-stations-durable-secure-easy-maintenance-various-lengths\"\u003eType 316 Stainless Steel Chain\u003c\/a\u003e\u003c\/strong\u003e – The recommended chain for suspending this float switch anchor in harsh and wet environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-megamaster-non-mercury-pump-control-float-switch\"\u003eSJE MegaMaster Float Switch\u003c\/a\u003e\u003c\/strong\u003e – A popular float switch commonly used with the yellow anchor for pump control in duplex lift stations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eReliable Float Switch Support Where Space Is Tight\u003c\/h2\u003e\n\u003cp\u003eWhen you need dependable float switch performance in a confined space, this SJE float switch anchor 10 lb provides a simple and effective solution. Its weighted mushroom design keeps the system stable, while allowing easy removal for maintenance or adjustments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e supplies this \u003cstrong\u003eSJE Rhombus mushroom anchor\u003c\/strong\u003e across Canada and the USA, supporting professionals working in municipal, industrial, and agricultural water systems.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/FAQPage\" itemscope=\"\"\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a float switch anchor used for?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA float switch anchor is used to suspend and stabilize float switches in a tank or pit. It provides a fixed pivot point, so floats can move freely and activate pumps at accurate levels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan I use this anchor without a chain?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo, this pump float switch anchor is designed to be used with a stainless steel chain. The chain allows proper positioning and adjustment of float switches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat type of chain should be used?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt is recommended to use \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/316-stainless-steel-pump-lifting-chain-corrosion-resistant-for-submersible-pumps-sewage-stations-durable-secure-easy-maintenance-various-lengths\"\u003eType 316 stainless steel chain\u003c\/a\u003e\u003c\/strong\u003e for corrosion resistance and long-term durability in wet or harsh environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this suitable for tight or small pits?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, this mushroom float switch anchor is specifically designed for tight installations where space is limited and multiple float switches may be required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan I remove the system for maintenance?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, the anchor, chain, and float switches can be removed together, making maintenance, cleaning, and adjustments straightforward.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"Default Title","offer_id":42107879172,"sku":"1018687","price":99.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Float_Switch_Anchor_Mushroom_Style.jpg?v=1775563238"},{"product_id":"sje-pumpmaster-plus-15-amp-wide-angle-piggyback-plug-pump-float-switch-120-240v","title":"SJE PumpMaster Plus Float Switch – SJE PumpMaster Pump Switch with Piggyback Plug for Sump Pumps","description":"\u003ch2\u003eHeavy-Duty SJE PumpMaster Pump Switch for Reliable Sump Pump Control\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSJE PumpMaster Plus float switch\u003c\/strong\u003e is a professional-grade SJE PumpMaster pump switch designed for automatic water level control in sump, sewage, and effluent systems. Built by SJE Rhombus, this high-performance SJE Rhombus float switch delivers reliable operation, long service life, and easy plug-and-play installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWide-angle mechanical float for accurate activation\u003c\/li\u003e\n\u003cli\u003ePiggyback plug for fast installation\u003c\/li\u003e\n\u003cli\u003eControls pumps up to 2 HP\u003c\/li\u003e\n\u003cli\u003eTrusted by professionals across Canada and the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e👉 Upgrade to the SJE Rhombus Float Switch PumpMaster Plus, the reliable pumpmaster float switch built to perform.\u003c\/p\u003e\n\u003ch2\u003eKey Features of the SJE PumpMaster Plus Float Switch\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Angle Mechanical Design:\u003c\/strong\u003e Non-mercury float provides extended pump run time and precise water level control. This design allows the SJE PumpMaster Plus float switch to operate reliably in both calm and turbulent conditions, ensuring consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiggyback Plug for Easy Installation:\u003c\/strong\u003e This SJE piggyback float switch connects quickly to compatible pumps with no hardwiring required, making it an ideal pump float switch for fast installation or replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Down Operation:\u003c\/strong\u003e This pump-down float switch activates at high water levels and turns off at low levels, helping prevent flooding, reduce pump wear, and improve energy efficiency in sump and wastewater systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Compatibility:\u003c\/strong\u003e Designed as a true SJE PumpMaster pump switch, it supports:\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e120V pumps up to 3\/4 HP\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e240V pumps up to 2 HP\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMaking it a versatile SJE PumpMaster float switch for residential and commercial applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Pumping Range:\u003c\/strong\u003e Offers a flexible pumping range of approximately 7” to 36”, depending on tether length, allowing customization for various sump and effluent system setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e High-impact PVC float housing resists corrosion in demanding environments, making this SJE Rhombus float switch suitable for water and sewage applications up to 140°F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL Recognized \u0026amp; CSA Certified:\u003c\/strong\u003e Meets North American safety and performance standards, ensuring reliability and compliance in professional installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Stainless Steel Clamp:\u003c\/strong\u003e Provides a secure pivot point for mounting the float switch cable to the discharge pipe. An \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-adjustable-float-switch-cable-weight\"\u003eoptional cable weight\u003c\/a\u003e\u003c\/strong\u003e is also available for additional installation flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Year Warranty:\u003c\/strong\u003e Backed by SJE Rhombus, this PumpMaster Plus float switch is built for long-term durability and dependable operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the SJE PumpMaster Plus Does\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSJE PumpMaster Plus float switch\u003c\/strong\u003e automatically controls your pump based on liquid levels using pump-down operation, the most common setup for drainage and wastewater systems.\u003c\/p\u003e\n\u003cp\u003eThis means the float switch activates your pump to empty the pit or tank as liquid levels rise.\u003c\/p\u003e\n\u003ch3\u003ePump Down Operation (Most Common)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurns the pump ON when the water rises\u003c\/li\u003e\n\u003cli\u003eTurns the pump OFF when levels drop\u003c\/li\u003e\n\u003cli\u003ePrevents overflow and flooding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis makes the \u003cstrong\u003eSJE PumpMaster float switch\u003c\/strong\u003e ideal for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSump pump systems\u003c\/li\u003e\n\u003cli\u003eSewage and wastewater\u003c\/li\u003e\n\u003cli\u003eEffluent pumping\u003c\/li\u003e\n\u003cli\u003eDrainage and dewatering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA dependable pump-down float switch that keeps your system running safely.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSJE PumpMaster Plus Float Switch (SJE PumpMaster Pump Switch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch Type\u003c\/td\u003e\n\u003ctd\u003eWide-Angle Mechanical, Non-Mercury Float\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003ePump Down (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V \/ 240V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Running Current\u003c\/td\u003e\n\u003ctd\u003e15 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Starting Current\u003c\/td\u003e\n\u003ctd\u003e85 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 3\/4 HP (120V) \/ Up to 2 HP (240V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003e14-gauge, 2-conductor SJOW, water-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Material\u003c\/td\u003e\n\u003ctd\u003eHigh-impact, corrosion-resistant PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Size\u003c\/td\u003e\n\u003ctd\u003e3.05” diameter x 3.56” length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Rating\u003c\/td\u003e\n\u003ctd\u003eUp to 140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePumping Range\u003c\/td\u003e\n\u003ctd\u003eAdjustable from 7” to 36” (based on tether length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003ePiggyback Plug (plug-and-play) \/ Quick Fit (optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL Recognized, CSA Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eStainless Steel Mounting Clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-Year Limited Manufacturer Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg alt=\"SJE PumpMaster Plus Float Switch\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_PumpMaster_Plus_Float_Switch.png?v=1775566404\"\u003e \u003cimg alt=\"SJE PumpMaster Pump Switch\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Heavy-Duty_SJE_PumpMaster_Pump_Switch.png?v=1775566373\"\u003e \u003cimg alt=\"SJE PumpMaster Plus Float Switch\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Screenshot_2026-04-07_205100.png?v=1775566373\"\u003e\u003c\/p\u003e\n\u003ch2\u003eAvailable Options at Cleanflow\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSJE PumpMaster Plus float switch\u003c\/strong\u003e is available at Cleanflow in the following configurations:\u003c\/p\u003e\n\u003ch3\u003eVoltage \u0026amp; Plug Type\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e120V Piggyback Plug\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e240V Piggyback Plug\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCable Length Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e10 Foot Cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e15 Foot Cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e20 Foot Cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e30 Foot Cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe SJE PumpMaster Plus float switch is suitable for many applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSump pump systems\u003c\/li\u003e\n\u003cli\u003eSewage and wastewater systems\u003c\/li\u003e\n\u003cli\u003eEffluent pumping\u003c\/li\u003e\n\u003cli\u003eSeptic tanks\u003c\/li\u003e\n\u003cli\u003eDrainage and dewatering systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis float switch for sump pump applications is widely used as a replacement or upgrade for existing pump systems.\u003c\/p\u003e\n\u003ch3\u003eLooking for a Float Switch for Higher Temperature Applications?\u003c\/h3\u003e\n\u003cp\u003eIf your application requires higher temperature resistance, consider the \u003cstrong\u003eSJE HiTempMaster float switch\u003c\/strong\u003e, a wide-angle SJE Rhombus float switch designed for temperatures up to 200°F (93°C).\u003c\/p\u003e\n\u003cp\u003e👉 View the \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-hitempmaster-mechanically-activated-pump-switch-for-high-temperature-sump-applications\"\u003eSJE HiTempMaster Float Switch\u003c\/a\u003e\u003c\/strong\u003e for high-temperature sump and wastewater applications.\u003c\/p\u003e\n\u003ch3\u003eView Compatible Pump Options\u003c\/h3\u003e\n\u003cp\u003eLooking to pair your SJE PumpMaster Plus float switch with the right pump? Cleanflow offers a wide selection of compatible pump solutions for sump, sewage, and dewatering systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/submersible-dewatering-pumps\"\u003eShop Submersible Dewatering Pumps\u003c\/a\u003e\u003c\/strong\u003e – Ideal for draining basins, basements, and construction job sites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/electric-submersible-trash-pumps\"\u003eBrowse Submersible Trash Pumps\u003c\/a\u003e\u003c\/strong\u003e – Designed for handling debris-laden water in demanding environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e👉 All options are available at Cleanflow with shipping across Canada and the USA.\u003c\/p\u003e\n\u003ch2\u003eInstallation Overview\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSecure float cable with included clamp\u003c\/li\u003e\n\u003cli\u003eAdjust tether length\u003c\/li\u003e\n\u003cli\u003ePlug into a power outlet\u003c\/li\u003e\n\u003cli\u003ePlug the pump into the piggyback plug\u003c\/li\u003e\n\u003cli\u003eTest operation\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eUpgrade Your Pump System with the SJE PumpMaster Plus\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eSJE PumpMaster Plus float switch\u003c\/strong\u003e delivers reliable, automatic pump control with durable construction and easy installation. Whether you need a pump float switch for a sump system or a heavy-duty SJE PumpMaster switch for wastewater applications, this model is built to perform.\u003c\/p\u003e\n\u003cp\u003eAt \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e, we supply high-quality SJE Rhombus float switches and pump control solutions to customers across Canada and the USA, ensuring fast shipping, competitive pricing, and trusted service for both residential and commercial applications.\u003c\/p\u003e\n\u003cp\u003eIf you're looking for more advanced monitoring and protection, explore our full range of \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus Controls \u0026amp; Alarms\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/FAQPage\" itemscope=\"\"\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is an SJE PumpMaster pump switch?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe SJE PumpMaster pump switch is a mechanically activated float switch that automatically turns pumps on and off based on liquid level.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this a piggyback float switch?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, the SJE PumpMaster Plus is a piggyback float switch, allowing easy plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this be used as a sump pump float switch?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, this SJE PumpMaster float switch is commonly used in sump pump systems and is ideal for replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a pump-down float switch?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA pump-down float switch activates the pump when water levels rise and turns it off when levels drop.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat makes SJE Rhombus float switches reliable?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eSJE Rhombus float switches are known for their durability, high load capacity, and consistent performance in demanding environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow do you properly install the SJE PumpMaster Plus float switch?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eTo install the SJE PumpMaster Plus float switch, secure the float cable to the pump discharge pipe using the included stainless steel clamp, then adjust the tether length to set the desired activation range. Plug the SJE piggyback float switch into a power outlet and connect the pump to the piggyback plug.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat should you check before installing a piggyback float switch?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eBefore installing the SJE PumpMaster pump switch, ensure that:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe outlet voltage matches the float switch and pump voltage\u003c\/li\u003e\n\u003cli\u003eThe electrical outlet is not located inside the pump chamber\u003c\/li\u003e\n\u003cli\u003eThe float cable is not damaged and can move freely\u003c\/li\u003e\n\u003cli\u003eThe tether length is set correctly for proper operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFollowing these steps helps ensure safe and reliable performance of your SJE PumpMaster float switch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"10 Foot Cable | 120V Piggyback Plug","offer_id":29517627097149,"sku":"1003232","price":128.7,"currency_code":"CAD","in_stock":true},{"title":"15 Foot Cable | 120V Piggyback Plug","offer_id":39453374971965,"sku":"1003243","price":135.8,"currency_code":"CAD","in_stock":true},{"title":"20 Foot Cable | 120V Piggyback Plug","offer_id":29517627719741,"sku":"1003255","price":141.31,"currency_code":"CAD","in_stock":true},{"title":"30 Foot Cable | 120V Piggyback Plug","offer_id":29517628604477,"sku":"1003267","price":153.91,"currency_code":"CAD","in_stock":true},{"title":"10 Foot Cable |  240V Piggyback Plug","offer_id":29517630472253,"sku":"1003233","price":133.43,"currency_code":"CAD","in_stock":true},{"title":"20 Foot Cable | 240V Piggyback Plug","offer_id":29517630931005,"sku":"1003257","price":144.73,"currency_code":"CAD","in_stock":true},{"title":"30 Foot Cable | 240V Piggyback Plug","offer_id":29517631619133,"sku":"1003269","price":157.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_PumpMaster_Plus_Float_Switch.jpg?v=1775566664"},{"product_id":"sje-pumpmaster-wps-nsf61-wide-angle-float-switch","title":"SJE PumpMaster® WPS Potable Water Float Switch – NSF\/ANSI 61 Certified Wide Angle Float Switch for Pump Control","description":"\u003ch2\u003eSJE PumpMaster® WPS NSF61 Wide-Angle Float Switch | Non-Mercury | UL, CSA, NSF\/ANSI 61 Certified\u003c\/h2\u003e\n\u003ch3\u003eReliable Potable Water Float Switch for Pump Control\u003c\/h3\u003e\n\u003cp\u003eThe SJE PumpMaster® WPS float switch is a mechanically activated, wide-angle float switch designed for automatic pump control in potable water and clean water systems. Built for durability and certified to NSF\/ANSI 61 standards, this potable water float switch is safe for use in drinking water applications, making it ideal for cisterns, water tanks, and well systems.\u003c\/p\u003e\n\u003cp\u003eDesigned for direct operation, the SJE PumpMaster float switch can control pumps up to 1\/2 HP at 120 VAC and 1 HP at 230 VAC, or low-current control applications down to 120 VAC, 100 mA.\u003c\/p\u003e\n\u003cp\u003eWith a rugged, non-mercury design and flexible SPDT wiring, this float level switch delivers dependable performance in both residential and light industrial environments.\u003c\/p\u003e\n\u003ch2\u003eKey Features of the SJE PumpMaster® WPS Potable Water Float Switch\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNSF\/ANSI 61 Certified for Potable Water:\u003c\/strong\u003e Approved for use in drinking water systems and tanks 250 gallons or larger, ensuring safe operation in potable water applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Angle Float Switch (7”–36” Adjustable Range):\u003c\/strong\u003e Provides a large pumping differential, reducing pump cycling and extending equipment life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPDT Switch (Normally Open \/ Normally Closed):\u003c\/strong\u003e Can be wired for pump down (normally open) or pump up (normally closed) applications for maximum flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Pump Control Capability:\u003c\/strong\u003e Controls pumps up to 1\/2 HP (120V) and 1 HP (230V) without requiring additional control panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Mercury, Eco-Friendly Design:\u003c\/strong\u003e Safe for both users and the environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Harsh Conditions:\u003c\/strong\u003e High-impact, corrosion-resistant PVC housing ensures long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Sensitive to Turbulence:\u003c\/strong\u003e Operates reliably in both calm and turbulent water conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes External Cable Weight:\u003c\/strong\u003e Allows easy adjustment of tether length and pumping range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX8 Rated (Fully Submersible):\u003c\/strong\u003e Designed for continuous submersion in water environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Year Manufacturer Warranty:\u003c\/strong\u003e Built for long-term reliability and backed by SJE Rhombus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow the SJE PumpMaster® WPS Potable Water Float Switch Works\u003c\/h2\u003e\n\u003cp\u003eThis water float switch automatically controls pump operation based on the liquid level:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs water rises or falls, the float tilts with the level\u003c\/li\u003e\n\u003cli\u003eThe internal switch activates at a set angle\u003c\/li\u003e\n\u003cli\u003eThe pump turns ON or OFF depending on the wiring configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis simple, mechanical design ensures reliable operation without complex electronics.\u003c\/p\u003e\n\u003ch2\u003ePump Up vs Pump Down (Wiring Explained)\u003c\/h2\u003e\n\u003cp\u003eThe SJE PumpMaster float switch uses a Single Pole, Double Throw (SPDT) design, allowing flexible wiring:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Down (Normally Open)\u003c\/strong\u003e\u003cbr\u003eThe switch activates when water rises → used for draining tanks or sump pits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Up (Normally Closed)\u003c\/strong\u003e\u003cbr\u003eThe switch activates when water drops → used for filling tanks or maintaining levels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis flexibility makes it an ideal float switch for water tanks, cisterns, and storage systems.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/WPS_Potable_Water_Float_Switch_06bdac52-3795-43da-ab7e-c81126aaf425_480x480.png?v=1775568341\" alt=\"WPS Potable Water Float Switch\"\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe SJE PumpMaster® WPS potable water float switch is ideal for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePotable water tanks\u003c\/li\u003e\n\u003cli\u003eCisterns and storage tanks\u003c\/li\u003e\n\u003cli\u003eWell systems\u003c\/li\u003e\n\u003cli\u003eWater transfer systems\u003c\/li\u003e\n\u003cli\u003eAgricultural water applications\u003c\/li\u003e\n\u003cli\u003eResidential and light commercial pump control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned specifically for clean water environments, this float level switch ensures safe and reliable operation in drinking water systems.\u003c\/p\u003e\n\u003ch2\u003eSJE PumpMaster® WPS Float Switch Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Options\u003c\/td\u003e\n\u003ctd\u003eNormally Open (N.O.) \/ Normally Closed (N.C.), SPDT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e16 AWG, 3-conductor SJOW, water-resistant (CPE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Material\u003c\/td\u003e\n\u003ctd\u003eHigh-impact, corrosion-resistant PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Dimensions\u003c\/td\u003e\n\u003ctd\u003e3.05” diameter x 3.56” length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Rating\u003c\/td\u003e\n\u003ctd\u003eUp to 140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustable Pumping Range\u003c\/td\u003e\n\u003ctd\u003e7” to 36” (18–91 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120\/230 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Pump Running Current\u003c\/td\u003e\n\u003ctd\u003e13 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Pump Starting Current\u003c\/td\u003e\n\u003ctd\u003e85 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Electrical Load\u003c\/td\u003e\n\u003ctd\u003e120 VAC, 100 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIPX8 (submersible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eNSF\/ANSI 61, CSA, UL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_PumpMaster_WPS_Potable_Water_Float_Switch.png?v=1779070945\" alt=\"SJE PumpMaster® WPS Potable Water Float Switch\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This switch must be used with pumps that provide integral thermal overload protection and is not intended to control non-arcing loads.\u003c\/p\u003e\n\u003ch2\u003eAvailable Cable Length Options\u003c\/h2\u003e\n\u003cp\u003eThe SJE PumpMaster® WPS potable water float switch is available in two cable length configurations to suit your installation requirements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e15 ft model\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e30 ft model\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth options include an external cable weight and are designed for reliable operation in water level control applications.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSJE PumpMaster® WPS float switch\u003c\/li\u003e\n\u003cli\u003eExternal cable weight\u003c\/li\u003e\n\u003cli\u003ePre-wired 3-conductor cable\u003c\/li\u003e\n\u003cli\u003eInstallation-ready configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExplore More Pump Control \u0026amp; Float Switch Solutions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/float-switches-and-accessories\"\u003eFloat Switches \u0026amp; Accessories\u003c\/a\u003e\u003c\/strong\u003e – Browse a full range of float switches, cable weights, and mounting accessories for water-level control and pump automation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/tank-alarm-systems\"\u003eTank Alarm Systems\u003c\/a\u003e\u003c\/strong\u003e – Monitor liquid levels with reliable high\/low tank alert alarm systems compatible with float switches like the SJE PumpMaster® WPS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOrder the SJE PumpMaster® WPS Potable Water Float Switch Online\u003c\/h2\u003e\n\u003cp\u003eBuy the \u003cstrong\u003eSJE PumpMaster® WPS float switch\u003c\/strong\u003e, a trusted potable water float switch and wide-angle float switch, online from \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWe supply high-quality water float switches and pump control solutions across Canada and the USA, offering fast shipping, competitive pricing, and expert support.\u003c\/p\u003e\n\u003cp\u003eExplore more \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus Controls \u0026amp; Alarms\u003c\/a\u003e\u003c\/strong\u003e for additional float switches, pump controls, and water level management solutions.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cdiv itemscope=\"\" itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a potable water float switch?\u003c\/h4\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA potable water float switch is designed and certified (NSF\/ANSI 61) for safe use in drinking water systems, ensuring materials do not contaminate water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow to wire a float switch?\u003c\/h4\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThis switch uses a 3-wire SPDT configuration:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCommon (white)\u003c\/li\u003e\n\u003cli\u003eNormally Open (black)\u003c\/li\u003e\n\u003cli\u003eNormally Closed (red)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can wire it for pump-up or pump-down operation, depending on your application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a wide-angle float switch?\u003c\/h4\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA wide-angle float switch has a larger activation range (7”–36”), allowing greater level variation before switching. This reduces pump cycling and improves efficiency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this float switch control a pump directly?\u003c\/h4\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. The SJE PumpMaster WPS is designed for direct pump control up to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2 HP at 120V\u003c\/li\u003e\n\u003cli\u003e1 HP at 230V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this float switch safe for drinking water?\u003c\/h4\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. It is NSF\/ANSI 61 certified, making it safe for potable water applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat size tank can this be used in?\u003c\/h4\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt is approved for use in tanks 250 gallons (950L) or larger.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is the SJE PumpMaster® WPS pump switch used for?\u003c\/h4\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe SJE PumpMaster® WPS pump switch is used to automatically control pump operation based on water levels in tanks, cisterns, and wells. This wide-angle float switch activates the pump when liquid levels rise or fall, helping prevent overflow or dry running. It is commonly used in potable water systems and water storage applications where reliable, automatic pump control is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"15 Foot Potable Water Switch","offer_id":12660587692093,"sku":"1047427","price":139.06,"currency_code":"CAD","in_stock":true},{"title":"30 Foot Potable Water Switch","offer_id":12660587724861,"sku":"1053697","price":174.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_PumpMaster.jpg?v=1775568664"},{"product_id":"xpert-alert-wifi-indoor-alarm-system-dual-sensor-remote-notifications-via-sms-email-led-alarm-light-ring-csa-certified-5-year-warranty","title":"Xpert Alert® WiFi Indoor Alarm System | Dual Sensor, Remote Notifications via SMS\/Email, LED Alarm Light Ring, CSA Certified, 5-Year Warranty","description":"\u003ch2\u003eXpert Alert® WiFi Indoor High Water Alarm System for Ultimate Home Protection\u003c\/h2\u003e\n\u003cp\u003eThe Xpert Alert® WiFi indoor alarm system is a reliable high-water alarm designed to help protect your home 24\/7 from potentially costly damage caused by flooding, pump failure, or frozen pipes. This high liquid level alarm continuously monitors liquid levels and reports any alarm condition by notifying you locally (audible and visual alerts) and remotely via SMS text messages and\/or email to your smartphone, tablet, or computer over a WiFi or Ethernet network.\u003c\/p\u003e\n\u003cp\u003eWith its compact design, smooth rounded edges, and large push button with LED light ring, this indoor water level alarm system is ideal for residential applications where early warning and remote monitoring are critical.\u003c\/p\u003e\n\u003ch2\u003eImmediate Alarm Response\u003c\/h2\u003e\n\u003cp\u003eWhen the tank level rises, the high water float activates the alarm, providing an audible and visual warning of potentially dangerous liquid level conditions. The LED alarm light ring illuminates red for alarm 1 and amber for alarm 2, making it easy to identify alarm status at a glance.\u003c\/p\u003e\n\u003cp\u003eThe alarm horn can be silenced using the large front push button, while the LED remains on until the condition is resolved. Once cleared, the system automatically resets. A built-in low-temperature alarm activates at 40°F (4°C) to help protect against freezing pipes, adding another layer of protection for your system.\u003c\/p\u003e\n\u003ch2\u003eSeamless WiFi Connectivity \u0026amp; Remote Monitoring\u003c\/h2\u003e\n\u003cp\u003eThis WiFi indoor alarm system connects easily to your existing WiFi or Ethernet network and does not rely on cellular service, making it ideal for locations with poor signal coverage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReceive SMS and email notifications instantly\u003c\/li\u003e\n\u003cli\u003eAlerts include:\n\u003cul\u003e\n\u003cli\u003eHigh water\/pump failure\u003c\/li\u003e\n\u003cli\u003ePower loss and restoration\u003c\/li\u003e\n\u003cli\u003eLow temperature\u003c\/li\u003e\n\u003cli\u003eLow battery\u003c\/li\u003e\n\u003cli\u003eAlarm offline status\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eNotifies up to 4 contacts (2 email + 2 text)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere are no monthly fees or contracts, making this a cost-effective remote water level alarm solution for homes, cottages, and rental properties.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThis high liquid level alarm system is designed for a wide range of residential and light commercial applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLift stations and lift pump chambers\u003c\/li\u003e\n\u003cli\u003eSeptic tanks and holding tanks\u003c\/li\u003e\n\u003cli\u003eBasement flood protection systems\u003c\/li\u003e\n\u003cli\u003eAgricultural and water systems\u003c\/li\u003e\n\u003cli\u003eResidential water monitoring systems\u003c\/li\u003e\n\u003cli\u003eRental properties and seasonal homes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features of the Xpert Alert® WiFi Indoor Alarm System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNEMA 1 enclosure rated for indoor use\u003c\/li\u003e\n\u003cli\u003eDual sensor inputs to monitor two separate alarm conditions\u003c\/li\u003e\n\u003cli\u003eLED alarm light ring (red = alarm 1, amber = alarm 2)\u003c\/li\u003e\n\u003cli\u003eAudible alarm for high water, low temperature, and low battery\u003c\/li\u003e\n\u003cli\u003eLED power indicators (primary power, battery backup, low battery)\u003c\/li\u003e\n\u003cli\u003eNetwork status indicator for connection status\u003c\/li\u003e\n\u003cli\u003eWiFi connectivity for remote alarm monitoring\u003c\/li\u003e\n\u003cli\u003eSimple push-button WiFi setup (Access Point Mode or Ethernet)\u003c\/li\u003e\n\u003cli\u003eLarge, easy-to-use test\/silence button\u003c\/li\u003e\n\u003cli\u003eAutomatic alarm reset after condition clears\u003c\/li\u003e\n\u003cli\u003eIntegral rechargeable battery backup for operation during power outages\u003c\/li\u003e\n\u003cli\u003eAuxiliary alarm contacts for remote device integration\u003c\/li\u003e\n\u003cli\u003eCSA Certified\u003c\/li\u003e\n\u003cli\u003e5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrimary Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 VAC, 60 Hz, 5 watts max (alarm condition)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSecondary Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery Backup\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.7 VDC rechargeable lithium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEMA 1 indoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.5\" x 4\" x 1.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 dB at 10 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Cord\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 ft Micro USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloat Switch Connection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 VDC across terminals (float switch connection only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloat Switch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSJE MilliAmpMaster™ control switch with mounting clamp (select models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 ft, 18 gauge, 2 conductor, water-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWiFi Connectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWPA2 required; Access Point or Ethernet setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEthernet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequires wired connection (cable not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAuxiliary Contacts\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≤ 30 VAC\/VDC, 1 amp max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg alt=\"Xpert Alert® WiFi Indoor Alarm System\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Xpert_Alert_WiFi_Indoor_Alarm_System_480x480.png?v=1775564454\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePower Backup \u0026amp; Reliability\u003c\/h2\u003e\n\u003cp\u003eThis high water alarm with battery backup continues to operate during power outages using its integral rechargeable battery. You will also receive alerts for power loss, restoration, and low battery, ensuring continuous monitoring when it matters most.\u003c\/p\u003e\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003cp\u003eChoose the configuration that fits your setup:\u003c\/p\u003e\n\u003ch3\u003eXpert Alert Panel Only – Float Switch Not Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlarm panel only (no float switch included)\u003c\/li\u003e\n\u003cli\u003eIdeal if you already have a compatible float switch\u003c\/li\u003e\n\u003cli\u003eSuitable for replacing or upgrading an existing alarm system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eXpert Alert w\/ 10 Ft High Level Float Switch\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete WiFi indoor alarm system with float switch\u003c\/li\u003e\n\u003cli\u003eIncludes SJE MilliAmpMaster™ control switch and mounting clamp\u003c\/li\u003e\n\u003cli\u003eReady for installation for new or replacement setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIncluded Float Switch Details\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10 ft (3 m) cable, flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant\u003c\/li\u003e\n\u003cli\u003eFloat: 2.74\" diameter x 4.83\" length\u003c\/li\u003e\n\u003cli\u003eHigh-impact, corrosion-resistant polypropylene housing\u003c\/li\u003e\n\u003cli\u003eSuitable for sewage and water applications up to 140°F (60°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e If you don’t already have a float switch, choose the complete system option.\u003c\/p\u003e\n\u003ch2\u003eStay Protected with Smart Alerts\u003c\/h2\u003e\n\u003cp\u003eWith the Xpert Alert® WiFi indoor alarm system, you always know what’s happening, whether you’re at home or away. This indoor high water alarm system provides real-time alerts, helping you act quickly and prevent costly damage.\u003c\/p\u003e\n\u003ch2\u003eBuy the Xpert Alert® WiFi Indoor Alarm System from Cleanflow\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e supplies \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus controls and alarm systems\u003c\/a\u003e\u003c\/strong\u003e across Canada and the USA. If you're looking for a reliable WiFi indoor alarm system or high water alarm, the \u003cstrong\u003eXpert Alert® WiFi Indoor Alarm System\u003c\/strong\u003e is a proven solution for residential and light commercial applications.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/FAQPage\" itemscope=\"\"\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow do I set up the Xpert Alert® WiFi indoor alarm system?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe Xpert Alert® WiFi indoor alarm system can be set up using a WiFi-enabled device or through a wired Ethernet connection. Simply press the setup button, connect to the alarm’s network, and enter your WiFi and notification details. Once configured, the system will automatically connect and begin sending alerts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes this alarm system require a subscription?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo, this WiFi indoor alarm system does not require any monthly fees or contracts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow does the high water alarm send alerts?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe system sends SMS text messages and\/or email notifications through your WiFi or Ethernet network.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this alarm monitor more than one condition?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, it features dual sensor inputs, allowing you to monitor two separate alarm conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes the system work during power outages?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, it includes a built-in rechargeable battery backup, so the alarm continues to operate and send alerts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this suitable for septic or lift station applications?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, this high water alarm system is suitable for septic systems, lift stations, holding tanks, and other water applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes it require WiFi to function?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, a WiFi or Ethernet connection is required for remote notifications. Local audible and visual alarms will still activate regardless.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhere can I find a WiFi indoor alarm system for sale?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYou can find the Xpert Alert® WiFi indoor alarm system for sale at Cleanflow. We supply genuine SJE Rhombus alarm systems across Canada and the USA, with reliable support to help you choose the right water level monitoring solution for your application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"Xpert Alert Panel Only - Float Switch Not Included","offer_id":41475131932733,"sku":"1061894","price":440.17,"currency_code":"CAD","in_stock":true},{"title":"Xpert Alert w\/ 10-Ft High Level Float Switch","offer_id":41475131965501,"sku":"1060316","price":478.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Xpert_Alert_WiFi_Indoor_Alarm_System.jpg?v=1775564675"},{"product_id":"sje-tank-alert-ab-high-liquid-level-low-liquid-level-alarm-systems","title":"SJE Rhombus Tank Alert® AB Tank Alert Alarm System – High \u0026 Low Liquid Level Alarm (Indoor, Battery Backup)","description":"\u003ch2\u003eReliable Tank Alert Alarm System for Sump, Septic \u0026amp; Wastewater Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eSJE Rhombus Tank Alert® AB\u003c\/strong\u003e is a reliable \u003cstrong\u003etank alert alarm system\u003c\/strong\u003e designed to monitor liquid levels in sump pumps, septic tanks, and wastewater systems. Built for indoor use, this liquid level alarm system provides clear audible and visual alerts when liquid levels reach critical high or low points, helping prevent flooding, overflows, and costly system damage.\u003c\/p\u003e\n\n\u003cp\u003eIdeal for residential, commercial, and municipal applications, the Tank Alert® AB is widely used as a pump alarm system, tank level alarm, and lift station alarm. When an alarm is triggered, a loud horn and bright indicator light notify you immediately, so you can respond before problems escalate.\u003c\/p\u003e\n\n\u003ch2\u003eWhy You Need a Tank Alert Alarm System\u003c\/h2\u003e\n\n\u003cp\u003eUnexpected pump failure or rising water levels can lead to:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eBasement flooding\u003c\/li\u003e\n\u003cli\u003eSeptic system backups\u003c\/li\u003e\n\u003cli\u003eEquipment damage\u003c\/li\u003e\n\u003cli\u003eCostly repairs and downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis SJE Rhombus Tank Alert AB system helps detect problems early and takes action before serious damage occurs.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features \u0026amp; Benefits of the SJE Rhombus Tank Alert® AB\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor Compatibility:\u003c\/strong\u003e Enclosed in a NEMA 1 rated enclosure for secure indoor use, making this tank alert alarm system ideal for residential and commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-Reset Function:\u003c\/strong\u003e Automatically resets the alarm once the liquid level issue is resolved, ensuring continuous monitoring in any tank level alarm application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Alert System:\u003c\/strong\u003e Red alarm light and loud horn (87 decibels at 10 feet) provide immediate warning in this reliable liquid level alarm system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Backup:\u003c\/strong\u003e Ensures continuous operation during primary power failures (battery not included), making it a dependable wastewater alarm system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Battery Indicator:\u003c\/strong\u003e A chirping sound alerts you when it's time to replace the battery, keeping your tank alert system functioning properly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly Controls:\u003c\/strong\u003e Alarm test switch and horn silence switch for easy testing and silencing in this pump alarm system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e The external terminal block enables quick and simple float switch installation, reducing setup time for any tank alert alarm system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe \u0026amp; Reliable:\u003c\/strong\u003e UL Listed\/Recognized switching mechanism rated for 1 amp, 9 VDC load, with low voltage operation for reduced risk of electrical shock in wastewater and lift station alarm applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow the SJE Rhombus Tank Alert® AB Works\u003c\/h2\u003e\n\n\u003cp\u003eThis tank alert alarm system uses a float switch to monitor liquid levels and trigger alerts when conditions become unsafe:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eAlarm condition is triggered when the float switch (sensor) detects high or low liquid levels\u003c\/li\u003e\n\u003cli\u003eThe red alarm light illuminates, and the buzzer sounds continuously to signal an issue\u003c\/li\u003e\n\u003cli\u003eThe alarm remains active until the liquid level returns to a safe range\u003c\/li\u003e\n\u003cli\u003eThe test\/silence button can mute the buzzer, while the alarm light stays on to indicate the condition\u003c\/li\u003e\n\u003cli\u003eOnce the sensor deactivates, the system automatically resets for the next alarm cycle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis liquid level alarm system provides continuous monitoring and reliable protection for sump, septic, and wastewater applications.\u003c\/p\u003e\n\n\u003ch2\u003eBest Applications\u003c\/h2\u003e\n\n\u003cp\u003eThe SJE Rhombus Tank Alert AB is ideal for:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSump pump systems (basement flood prevention)\u003c\/li\u003e\n\u003cli\u003eSeptic tanks and sewage systems\u003c\/li\u003e\n\u003cli\u003eLift stations and pump chambers\u003c\/li\u003e\n\u003cli\u003eHolding tanks and storage systems\u003c\/li\u003e\n\u003cli\u003eWastewater and agricultural applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eTank Alert® AB alarm panel\u003c\/li\u003e\n\u003cli\u003e15 ft SJE SignalMaster® float switch (select models)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation-ready terminal connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eChoose Your Tank Alert® AB Configuration\u003c\/h3\u003e\n\n\u003cp\u003eSelect the option that best fits your application:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Only (No Float Switch Included)\u003c\/strong\u003e\u003cbr\u003eIdeal if you already have a compatible float switch or need a replacement alarm panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Level Alarm (Includes 15 ft Float Switch)\u003c\/strong\u003e\u003cbr\u003eDesigned to alert you when liquid levels rise too high, perfect for preventing overflow in sump, septic, or holding tanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Level Alarm (Includes 15 ft Float Switch)\u003c\/strong\u003e\u003cbr\u003eTriggers when liquid levels drop too low are commonly used to protect pumps from running dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Overview\u003c\/h2\u003e\n\n\u003cp\u003eInstallation is quick and straightforward; most setups can be completed in minutes:\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount the alarm panel\u003c\/strong\u003e\u003cbr\u003eSecure the panel to a wall using the rear keyhole.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition the float switch\u003c\/strong\u003e\u003cbr\u003eInstall the float at the desired activation level based on your application (high or low level alarm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect the float switch\u003c\/strong\u003e\u003cbr\u003eWire the float switch to the alarm panel’s terminal block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert a backup battery\u003c\/strong\u003e\u003cbr\u003eInstall a 9V battery to ensure operation during power outages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug into power\u003c\/strong\u003e\u003cbr\u003eConnect the unit to a standard 120V outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest the system\u003c\/strong\u003e\u003cbr\u003ePress the test button to confirm proper alarm operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eTechnical Specifications – SJE Rhombus Tank Alert® AB Alarm System\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Power\u003c\/td\u003e\n\u003ctd\u003e120 VAC, 60 Hz, 2.4–2.9 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Backup\u003c\/td\u003e\n\u003ctd\u003e9V DC (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Switch Voltage\u003c\/td\u003e\n\u003ctd\u003e9 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Horn\u003c\/td\u003e\n\u003ctd\u003e87 dB @ 10 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Type\u003c\/td\u003e\n\u003ctd\u003eNEMA 1 (indoor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Dimensions\u003c\/td\u003e\n\u003ctd\u003e6 x 4 x 2.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Length\u003c\/td\u003e\n\u003ctd\u003e6 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndicators\u003c\/td\u003e\n\u003ctd\u003eRed (alarm), Green (power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003eTest switch, silence switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuto Reset\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow Battery Alert\u003c\/td\u003e\n\u003ctd\u003eAudible chirp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Switch Compatibility\u003c\/td\u003e\n\u003ctd\u003e1 amp, 9 VDC (UL Listed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Switch (Included Models)\u003c\/td\u003e\n\u003ctd\u003e15 ft SignalMaster®\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Cable\u003c\/td\u003e\n\u003ctd\u003e15 ft, 18\/2 SJOW, water-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Material\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (corrosion-resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Liquid Temperature\u003c\/td\u003e\n\u003ctd\u003e140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuxiliary Contacts\u003c\/td\u003e\n\u003ctd\u003eOptional (N\/O, N\/C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL Listed, CSA Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_Tank_Alert_AB_Tank_Alert_Alarm_System_480x480.png?v=1775558854\" alt=\"SJE Rhombus Tank Alert® AB Tank Alert Alarm System\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_Tank_Alert_480x480.png?v=1775558855\" alt=\"SJE Rhombus Tank Alert®\"\u003e\n\n\u003ch2\u003eOrder the SJE Rhombus Tank Alert® AB Alarm System Online\u003c\/h2\u003e\n\n\u003cp\u003eProtect your system with a reliable tank alert alarm system designed for real-world wastewater and pump applications. The \u003cstrong\u003eSJE Rhombus Tank Alert® AB\u003c\/strong\u003e delivers dependable monitoring, fast response alerts, and long-term performance for sump pits, lift stations, holding tanks, and more.\u003c\/p\u003e\n\n\u003cp\u003eBuy the \u003cstrong\u003eSJE Rhombus Tank Alert AB\u003c\/strong\u003e, a trusted liquid level alarm system and pump alarm system, online from Cleanflow. We offer competitive pricing, fast shipping, and expert support.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e supplies tank alert alarm systems across Canada and the USA, making it easy to get the right solution when you need it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLooking for more options? Explore our full range of \u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus Controls \u0026amp; Alarms\u003c\/a\u003e to find the right configuration for your application.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a tank alert alarm system?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA tank alert alarm system monitors liquid levels using a float switch and alerts you when levels become too high or too low, helping prevent overflow or system failure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this be used as a septic tank alarm?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, the Tank Alert® AB is commonly used as a septic tank alarm and in sewage and wastewater systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes this alarm work during power outages?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, it includes a 9V battery backup that allows the system to continue operating if primary power is lost.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow loud is the alarm?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe alarm horn reaches approximately 87 decibels at 10 feet, making it easily audible in most indoor environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes the alarm reset automatically?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, once liquid levels return to normal, the system automatically resets for continued monitoring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan the alarm be silenced?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, the horn can be temporarily silenced using the silence button, but the warning light will remain on until the issue is resolved.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat applications is this best suited for?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt is ideal for sump pumps, septic systems, lift stations, holding tanks, and general wastewater monitoring.c\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"Tank Alert Panel Only - Float Switch Not Included","offer_id":29403331657789,"sku":"1011423","price":116.62,"currency_code":"CAD","in_stock":true},{"title":"Tank Alert w\/ 15 Ft High Level Float Switch","offer_id":29403233910845,"sku":"1011421","price":158.64,"currency_code":"CAD","in_stock":true},{"title":"Tank Alert w\/ 15 Ft Low Level Float Switch","offer_id":29403321499709,"sku":"1011424","price":158.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_Tank_Alert.jpg?v=1775559051"},{"product_id":"sje-xpert-alert-high-liquid-level-sump-pump-alarm","title":"SJE Xpert Alert Alarm System | Indoor NEMA 1, Multi-Function Alerts, LED Light Ring, Battery Backup, CSA\/UL Certified","description":"\u003ch2\u003eSJE Xpert Alert High Liquid Level Sump Pump Alarm System (Indoor)\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eSJE Xpert Alert sump pump alarm system\u003c\/strong\u003e is designed to alert you immediately when water levels rise in your sump pit, tank, or lift station. This high water alarm combines audible and visual alerts to help prevent flooding, pump failure, and costly damage.\u003c\/p\u003e\n\n\u003cp\u003eThis indoor sump pump alarm system with battery backup continues to operate during power outages. With a compact enclosure, LED light ring, and easy interface, it provides reliable monitoring.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh water alarm with float switch\u003c\/strong\u003e – Detects rising liquid levels and activates alerts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-function alarm system\u003c\/strong\u003e – Alerts for high water, low temperature, and low battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED light ring indicator\u003c\/strong\u003e\n  \u003cul\u003e\n    \u003cli\u003eRed – Alarm\u003c\/li\u003e\n    \u003cli\u003eAmber – Secondary alert\u003c\/li\u003e\n    \u003cli\u003eGreen – Power\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLoud audible alarm (80 dB)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBattery backup protection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic reset\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow temperature alarm\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDual sensor capability\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTest\/Silence button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAuxiliary alarm contacts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-voltage safety design\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow battery alert\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\n\u003cp\u003eWhen water levels rise, the float switch activates the alarm, triggering audible and visual alerts.\u003c\/p\u003e\n\n\u003cp\u003eThe alarm can be silenced, but the LED remains active until the issue is resolved. The system resets automatically once conditions return to normal.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eSump pump basins\u003c\/li\u003e\n\u003cli\u003eBasement flood protection\u003c\/li\u003e\n\u003cli\u003eLift stations\u003c\/li\u003e\n\u003cli\u003eSeptic systems\u003c\/li\u003e\n\u003cli\u003eSewage and wastewater systems\u003c\/li\u003e\n\u003cli\u003eHolding tanks\u003c\/li\u003e\n\u003cli\u003eAgricultural applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Power\u003c\/td\u003e\n\u003ctd\u003e120 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord\u003c\/td\u003e\n\u003ctd\u003e6 ft MicroUSB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Backup\u003c\/td\u003e\n\u003ctd\u003e3 AA batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Output\u003c\/td\u003e\n\u003ctd\u003e80 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eIndoor NEMA 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAux Contacts\u003c\/td\u003e\n\u003ctd\u003eNO\/NC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Temp\u003c\/td\u003e\n\u003ctd\u003e140°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTemperature Protection\u003c\/h2\u003e\n\n\u003cp\u003eIncludes a low-temperature alarm that activates below 40°F to prevent freezing damage.\u003c\/p\u003e\n\n\u003ch2\u003ePower \u0026amp; Backup\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e120 VAC primary power\u003c\/li\u003e\n\u003cli\u003eBattery backup operation\u003c\/li\u003e\n\u003cli\u003eContinues during outages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\n\u003ch3\u003eXpert Alert w\/ Float Switch\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes 10 ft float switch\u003c\/li\u003e\n\u003cli\u003eReady for installation\u003c\/li\u003e\n\u003cli\u003eIdeal for new systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eXpert Alert Panel Only\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo float switch included\u003c\/li\u003e\n\u003cli\u003eCompatible with existing systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose This Alarm?\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eReliable water level monitoring\u003c\/li\u003e\n\u003cli\u003ePrevents flooding and damage\u003c\/li\u003e\n\u003cli\u003eWorks during power outages\u003c\/li\u003e\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\u003cli\u003eSuitable for residential and commercial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOrder from Cleanflow\u003c\/h2\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e supplies \u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus controls \u0026amp; alarms\u003c\/a\u003e across Canada and the USA.\u003c\/p\u003e\n\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a sump pump alarm?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA sump pump alarm is a device that monitors water levels and alerts you when levels rise too high, helping prevent flooding and pump failure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow does a high water alarm work?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA float switch detects rising water levels and activates an audible alarm and LED indicator to warn of dangerous conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow do I install the SJE Xpert Alert sump pump alarm system?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe system is designed for simple indoor installation. Mount the alarm panel using the back keyhole, connect the float switch to the input terminals, install batteries, and plug in the power supply. It’s recommended to test the alarm on battery power before connecting to primary power to ensure proper operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes this sump pump alarm work during power outages?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, this sump pump alarm with battery backup continues to operate during power failures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this be used as a septic tank or sewage alarm system?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, it is suitable for septic tanks, sewage systems, lift stations, and other wastewater applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat does the LED light ring indicate?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cul\u003e\n\u003cli\u003eGreen: Power on\u003c\/li\u003e\n\u003cli\u003eRed: Alarm or low temperature\u003c\/li\u003e\n\u003cli\u003eAmber: High water condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan I connect this to a remote monitoring system?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, auxiliary alarm contacts allow connection to remote devices or monitoring systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow often should I test and maintain the sump pump alarm system?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt’s recommended to test the sump pump alarm weekly to ensure proper operation. Batteries should be replaced every 12 months and after each alarm condition. Regular testing helps ensure the high water alarm is working correctly when needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhere can I buy an SJE Rhombus Xpert Alert sump pump alarm?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYou can buy SJE Rhombus Xpert Alert sump pump alarm systems for sale directly from Cleanflow, supplying across Canada and the USA.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"XpertAlert w\/ 10 Ft High Level Float Switch","offer_id":29403394932797,"sku":"1056754","price":144.38,"currency_code":"CAD","in_stock":true},{"title":"XpertAlert Panel Only - Float Switch Not Included","offer_id":29403394998333,"sku":"1057333","price":117.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Xpert_Alert_Alarm_System.jpg?v=1774786783"},{"product_id":"sje-rhombus-milliampmaster-potable-water-control-switch-nsf-certified","title":"SJE Rhombus MilliAmpMaster™ WPS Control Switch for Potable Water, NSF Certified, SPDT, for Precision AC\/DC Applications, CSA\/UL Listed","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSJE MilliAmpMaster™ Float Switch for Potable Water Applications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eSJE MilliAmpMaster float switch\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eis a mechanically-activated, narrow-angle, NSF\/ANSI 61 certified control switch designed for reliable low-current control in AC and DC potable water applications. This SJE MilliAmpMaster WPS model is ideal for use as a control float switch in PLC systems, alarm panels, and low-current control circuits.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConstructed with sealed gold cross-point contacts, this SJE Rhombus float switch ensures consistent, non-arcing performance in sensitive, low-amperage environments, making it a reliable low-current float switch for control panel and solar applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eSJE MilliAmpMaster float switch\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eactivates and deactivates at approximately 1.5 inches above and below horizontally, using a 3.5-inch tether for precise level control. It is not sensitive to rotation, ensuring consistent operation in real-world installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eNSF\/ANSI 61 Certified (Potable Water Approved)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMeets strict drinking water safety standards, making it suitable for potable water tanks, municipal systems, and water treatment applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Features of the SJE MilliAmpMaster Float Switch (Low Current Control Switch)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eLow Current, Non-Arcing Operation:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eDesigned for applications down to 0.160 mA, making it ideal as a low amperage float switch for control circuits and PLC systems\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eSealed Gold Contacts:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eProvides reliable switching performance for sensitive electronics and non-arcing float switch applications\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eNarrow Angle Activation:\u003c\/strong\u003e\u003cspan\u003e Activates\/deactivates at approximately 1.5” above and below the horizontal for precise level control\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eSPDT Functionality (3-Wire):\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eCan be wired as normally open or normally closed, offering flexible system integration\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eNot Sensitive to Rotation:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eEnsures consistent performance regardless of float orientation\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eDurable Polypropylene Float:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eHigh-impact, corrosion-resistant construction for long-lasting use\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePotable Water Certified:\u003c\/strong\u003e\u003cspan\u003e NSF\/ANSI 61 compliant, making it a trusted potable water float switch\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eEasy Identification:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eOrange cap for quick visual recognition\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003e5-Year Limited Warranty:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eBacked by \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003ereliability \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eNSF-Certified Float Switch for Potable Water Control Applications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eSJE MilliAmpMaster float switch\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eis purpose-built for applications where traditional float switches are not suitable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCommon Applications:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePLC (programmable logic controller) systems\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eControl panels and relay systems\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAlarm float switch systems\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLow current solar applications\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePotable water storage tanks\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eWater treatment systems\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis makes it an excellent float switch for control panel integration, especially where precision and low current switching are critical.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow the SJE MilliAmpMaster Float Switch Works\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis narrow-angle float switch is designed for accurate and repeatable activation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eActivates at approximately 1.5 inches above horizontal\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDeactivates at approximately 1.5 inches below the horizontal\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eUses a 3.5-inch tether length for tight control range\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWiring Configurations:\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eNormally Open (High Level):\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTurns ON when the liquid rises and the float tips above the horizontal\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eNormally Closed (Low Level):\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTurns ON when liquid drops and the float tips below the horizontal\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis flexibility allows the \u003c\/span\u003e\u003cstrong\u003eSJE MilliAmpMaster WPS\u003c\/strong\u003e\u003cspan\u003e to be used in both pump-up and pump-down control applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eElectrical Performance (Low Current Precision)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis low-current float switch is engineered for sensitive electrical systems:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003e125 VAC\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli aria-level=\"2\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMax Load: \u003c\/span\u003e\u003cstrong\u003e1 amp\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"2\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMin Load: \u003c\/span\u003e\u003cstrong\u003e0.160 mA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e30 VDC\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli aria-level=\"2\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMax Load: \u003c\/span\u003e\u003cstrong\u003e0.1 amp\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"2\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMin Load: \u003c\/span\u003e\u003cstrong\u003e0.160 mA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003e5 VDC\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli aria-level=\"2\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMin Load: \u003c\/span\u003e\u003cstrong\u003e1 mA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePerfect for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePLC float switch systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eLow-voltage control circuits\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eNon-arcing control applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv align=\"left\" dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"134\"\u003e\n\u003ccol width=\"426\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCable\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e16 gauge, 3 conductor (UL, CSA), SJOW, water-resistant (CPE)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFloat Size\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2.74” diameter x 4.83” length\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh-impact polypropylene\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMax Water Temp\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e140°F (60°C)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMax Depth\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e30 ft (9 m), 13 PSI\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSwitch Type\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSPDT (Single Pole Double Throw)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOperation Angle\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNarrow angle (±1.5” from horizontal)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCSA, NSF\/ANSI 61 (potable water approved)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb id=\"docs-internal-guid-786a5912-7fff-1582-c77e-aab6ec6a72c6\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"SJE MilliAmpMaster WPS Float Switch\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_MilliAmpMaster.png?v=1775560473\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"SJE Rhombus MilliAmpMaster\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_MilliAmpMaster_WPS_Float_Switch.png?v=1775560472\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInstallation Overview\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInstalling the \u003c\/span\u003e\u003cspan\u003eSJE MilliAmpMaster float switch\u003c\/span\u003e\u003cspan\u003e is straightforward and designed for flexibility in control systems:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAttach the cable clamp at your desired activation level\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMaintain a 3.5” tether length for proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eEnsure the float moves freely without obstruction\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSelect the correct wires (NO\/NC) based on your application\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eInsulate unused wires using a wire nut\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAllow the system to cycle to confirm proper function\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e⚠️ Always disconnect power before installation and follow applicable electrical codes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhy Choose the SJE MilliAmpMaster WPS?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eNSF\/ANSI 61 certified for potable water safety\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDesigned specifically for low current and control applications\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eReliable performance in non-arcing environments\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTrusted SJE Rhombus float switch engineering\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCertified safe for potable water systems\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eIdeal for PLC, alarm, and control panel integration\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you're looking for a high-performance control float switch, rather than a standard pump switch, the SJE MilliAmpMaster is the right solution.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAvailable Options from Cleanflow\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eoffers multiple configurations of the \u003c\/span\u003e\u003cstrong\u003eSJE MilliAmpMaster float switch\u003c\/strong\u003e\u003cspan\u003e, all NSF\/ANSI 61 certified for potable water applications, to suit your application:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e15 ft cable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e30 ft cable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e50 ft cable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll models include a pipe clamp for easy installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e👉 Available across Canada and the USA, with fast shipping and expert support.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eNeed a Pump Switch Instead?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you're looking for a float switch designed for direct pump control rather than low current applications, consider the \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-pumpmaster-wps-nsf61-wide-angle-float-switch\"\u003eSJE PumpMaster® WPS\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e, a reliable solution for potable water pump systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is a low-current float switch used for?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA low-current float switch like the SJE MilliAmpMaster is used in control panels, PLC systems, alarms, and solar applications where minimal electrical load is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the SJE MilliAmpMaster be used with a control panel?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, this is a control float switch specifically designed for control panels, including PLC and relay-based systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this float switch safe for potable water?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, it is NSF\/ANSI 61 certified, making it suitable for potable water tanks and systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan it be wired normally open or normally closed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes, the \u003c\/span\u003e\u003cspan\u003eSPDT design\u003c\/span\u003e\u003cspan\u003e allows it to function as either normally open (NO) or normally closed (NC), depending on your application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat makes this different from a standard float switch?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnlike typical pump switches, this is a non-arcing float switch designed for low-amperage control circuits, offering precise operation and compatibility with sensitive electronics.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is the SJE MilliAmpMaster float switch wired?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis is a \u003c\/span\u003e\u003cstrong\u003e3-wire float switch (SPDT):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBlack = Normally Open (NO)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eRed = Normally Closed (NC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eWhite = Common\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt can be configured for \u003c\/span\u003e\u003cspan\u003epump-up or\u003cstrong\u003e pump-down control logic\u003c\/strong\u003e,\u003c\/span\u003e\u003cspan\u003e depending on your system setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is the activation range of this narrow-angle float switch?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis narrow-angle float switch activates and deactivates at approximately 1.5 inches above and below horizontal, using a 3.5-inch tether for precise control.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat cable and installation setup does it use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe SJE MilliAmpMaster WPS float switch includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e16-gauge, 3-conductor cable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePipe clamp for mounting\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAdjustable tether for activation level\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis makes installation simple for the float switch for control panel setups and tank applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"15 Foot Cable Length","offer_id":40584402305085,"sku":"1062686","price":78.57,"currency_code":"CAD","in_stock":true},{"title":"30 Foot Cable Length","offer_id":40584402337853,"sku":"1062687","price":95.89,"currency_code":"CAD","in_stock":true},{"title":"50 Foot Cable Length","offer_id":40584402370621,"sku":"1067227","price":122.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_MilliAmpMaster.jpg?v=1775561014"},{"product_id":"sje-rhombus-tank-alert-ez-indoor-outdoor-alarm-easy-installation-with-removable-cover","title":"SJE Rhombus Tank Alert® EZ Indoor\/Outdoor Alarm – Easy Installation with Removable Cover","description":"\u003ch2\u003eReliable Liquid Level Monitoring for Lift Pumps, Sump Pumps, and Holding Tanks\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSJE Rhombus Tank Alert® EZ alarm\u003c\/strong\u003e is a versatile and easy-to-install \u003cstrong\u003ehigh water alarm system\u003c\/strong\u003e designed for monitoring liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage systems, and agricultural applications. Designed for indoor and outdoor use, this indoor outdoor water level alarm provides clear audio and visual warnings to alert you of potential high or low liquid level conditions.\u003c\/p\u003e\n\u003cp\u003eWith its patented two-color molded enclosure and integrated translucent LED beacon, the Tank Alert® EZ illuminates and sounds an alarm when a critical liquid level is reached. Once the issue is resolved, the system automatically resets, helping ensure continuous monitoring without manual intervention.\u003c\/p\u003e\n\u003ch2\u003eSJE Rhombus Tank Alert® EZ Alarm Key Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Color Molded Enclosure:\u003c\/strong\u003e Translucent upper half illuminates during an alarm condition for clear visibility in any indoor or outdoor water level alarm application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Cover:\u003c\/strong\u003e Provides easy access for field wiring while keeping internal circuitry protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Mounting Tabs:\u003c\/strong\u003e Allows fast installation of this tank alert alarm system without additional brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterlocking Sound Chamber Design:\u003c\/strong\u003e Helps amplify the alarm horn while reducing moisture entry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType 3R Weatherproof Enclosure:\u003c\/strong\u003e Built for reliable use as an indoor outdoor water level alarm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Alarm Reset:\u003c\/strong\u003e System automatically clears once normal liquid levels are restored\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest \/ Silence Switch:\u003c\/strong\u003e Quickly test or silence the high water alarm system when needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen Power-On Indicator:\u003c\/strong\u003e Confirms system status at a glance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary Alarm Contacts:\u003c\/strong\u003e Connect to external or remote monitoring systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes 15 ft SJE SignalMaster® Control Switch (select models):\u003c\/strong\u003e Ensures accurate activation for high water alarm system performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow the Tank Alert® EZ Alarm Works\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eSJE Rhombus Tank Alert EZ alarm\u003c\/strong\u003e monitors liquid levels using a float switch that activates when levels reach a preset point. When a potentially threatening liquid level condition occurs, the alarm sounds and the upper housing illuminates for clear visibility.\u003c\/p\u003e\n\u003cp\u003eThe audible alarm can be silenced using the test\/silence button, while the indicator light remains on until the condition is corrected. Once normal levels are restored, the system automatically resets, allowing continuous monitoring without manual reset.\u003c\/p\u003e\n\u003ch3\u003eInstallation Tips for Best Performance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the alarm using the built-in upper and lower mounting tabs\u003c\/li\u003e\n\u003cli\u003eInstall the float switch at the desired activation level for accurate monitoring\u003c\/li\u003e\n\u003cli\u003eSeal conduit connections properly to prevent moisture or gas from entering the enclosure\u003c\/li\u003e\n\u003cli\u003eTest the alarm weekly to ensure proper operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese recommendations help ensure safe and reliable use of your tank alert alarm system, especially in wastewater and liquid level monitoring applications.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage – 120 VAC Model\u003c\/td\u003e\n\u003ctd\u003ePrimary: 120 VAC, 50\/60 Hz, 3.8 watts max (alarm condition)\u003cbr\u003eSecondary: 9 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage – 240 VAC Model\u003c\/td\u003e\n\u003ctd\u003ePrimary: 240 VAC, 50\/60 Hz, 3.8 watts max (alarm condition)\u003cbr\u003eSecondary: 9 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Enclosure\u003c\/td\u003e\n\u003ctd\u003e6.7\" x 5.3\" x 2.5\" (17.02 x 13.46 x 6.35 cm), indoor\/outdoor weatherproof thermoplastic, Type 3R water-tight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Horn\u003c\/td\u003e\n\u003ctd\u003e82 dB at 10 feet (3 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuxiliary Alarm Contacts\u003c\/td\u003e\n\u003ctd\u003e240 VAC \/ 30 VDC, 1.5 amps max, 50\/60 Hz (circuit not supervised)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePre-Mounted Terminal Block\u003c\/td\u003e\n\u003ctd\u003eOptional (special order), 20 amps, 120\/240 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord (120V Models Only)\u003c\/td\u003e\n\u003ctd\u003e6 ft (1.8 m) cord with 120 VAC plug and two RCC8 1\/2\" liquid-tight connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Switch\u003c\/td\u003e\n\u003ctd\u003eSJE SignalMaster® control switch with mounting clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Switch Cable\u003c\/td\u003e\n\u003ctd\u003e15 ft (4.57 m), flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant (CPE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Dimensions\u003c\/td\u003e\n\u003ctd\u003e2.74\" diameter x 4.83\" length (7 cm x 12.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Construction\u003c\/td\u003e\n\u003ctd\u003eHigh-impact, corrosion-resistant polypropylene housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Liquid Temperature\u003c\/td\u003e\n\u003ctd\u003eUp to 140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Water Depth\u003c\/td\u003e\n\u003ctd\u003e30 ft (9 meters), 13 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Electrical Rating\u003c\/td\u003e\n\u003ctd\u003e5 amps, 125\/250 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_Rhombus_Tank_Alert_c62f760a-8989-49c9-83df-0870d05dbaeb.png?v=1775563673\" alt=\"SJE Rhombus Tank Alert® EZ Indoor\/Outdoor Alarm\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003cimg alt=\"SJE Rhombus Tank Alert® EZ Indoor\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Outdoor_Alarm_480x480.png?v=1775563674\"\u003e\u003c\/p\u003e\n\u003ch2\u003eAvailable Options – SJE Rhombus Tank Alert® EZ Alarm\u003c\/h2\u003e\n\u003cp\u003eChoose the configuration that fits your installation and power requirements:\u003c\/p\u003e\n\u003ch3\u003e120 VAC Panel Only – No Float Switch\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlarm panel with 6 ft power cord (120V plug)\u003c\/li\u003e\n\u003cli\u003eFloat switch not included\u003c\/li\u003e\n\u003cli\u003eBest for replacement setups or use with an existing float switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e120 VAC Panel with 15 Ft High Level Float Switch\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete high water alarm system\u003c\/li\u003e\n\u003cli\u003eIncludes 15 ft SJE SignalMaster® control switch\u003c\/li\u003e\n\u003cli\u003eReady for high-level liquid monitoring applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e240 VAC Panel Only – No Float Switch\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlarm panel only for 240V systems\u003c\/li\u003e\n\u003cli\u003eFloat switch not included\u003c\/li\u003e\n\u003cli\u003eSuitable for system upgrades or existing installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e240 VAC Panel with 15 Ft High Level Float Switch\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete indoor outdoor water level alarm system\u003c\/li\u003e\n\u003cli\u003eIncludes 15 ft float switch\u003c\/li\u003e\n\u003cli\u003eDesigned for new installations or full system setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Low-level float switch options may be available upon request, depending on your application.\u003c\/p\u003e\n\u003ch2\u003eGet the SJE Rhombus Tank Alert® EZ Alarm from Cleanflow\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e supplies \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus controls and alarm systems\u003c\/a\u003e\u003c\/strong\u003e across Canada and the USA. If you’re looking for a reliable tank alert alarm or high water alarm system, we have the SJE Rhombus Tank Alert® EZ alarm for sale. It's a proven solution for indoor and outdoor liquid level monitoring applications.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/FAQPage\" itemscope=\"\"\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat does the SJE Rhombus Tank Alert® EZ alarm do?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe SJE Rhombus Tank Alert® EZ alarm is a high water alarm system that monitors liquid levels and provides audible and visual alerts when levels reach a preset high or low point. It helps prevent overflow and system failure in water and wastewater applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this tank alert alarm be used outdoors?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, this indoor outdoor water level alarm features a Type 3R weatherproof enclosure, making it suitable for both indoor and outdoor installations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this alarm be used for high and low-level monitoring?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, the system can function as either a high or low-level alarm, depending on the float switch model selected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes the alarm reset automatically?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, once the liquid level returns to normal, the Tank Alert® EZ alarm automatically resets without manual intervention.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan I connect this alarm to other monitoring systems?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, the alarm includes auxiliary contacts that allow connection to external or remote monitoring systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat voltage options are available?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThis SJE Rhombus Tank Alert EZ alarm is available in both 120 VAC and 240 VAC models to match different installation requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow often should I test the Tank Alert® EZ alarm system?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt is recommended to test the SJE Rhombus Tank Alert® EZ alarm system weekly to ensure proper operation. Regular testing helps confirm that the high water alarm system is working correctly and activates when a critical liquid level condition occurs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat happens if the alarm is silenced?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eWhen the alarm is silenced using the Test\/Silence button, the audible horn will stop, but the visual alarm light will remain on until the liquid level returns to normal. The SJE Rhombus Tank Alert® EZ alarm system automatically resets once the condition is resolved, ensuring continued monitoring without manual intervention.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"120 VAC Panel w\/ 6-Ft Power Cord (Panel Only - No Float)","offer_id":51905199931756,"sku":"1036591-PC","price":255.42,"currency_code":"CAD","in_stock":true},{"title":"120 VAC Panel - with 6-Ft Power Cord AND 15-Ft High Level Switch","offer_id":51905214873964,"sku":"1036589-PC","price":307.95,"currency_code":"CAD","in_stock":true},{"title":"120 VAC Panel - with 6-Ft Power Cord AND 15-Ft Low Level Switch","offer_id":51905214906732,"sku":"1038019-PC","price":307.95,"currency_code":"CAD","in_stock":false},{"title":"240 VAC Panel (Panel Only - No Float)","offer_id":51905214939500,"sku":"1036596","price":218.52,"currency_code":"CAD","in_stock":true},{"title":"240 VAC Panel - with 15-Ft High Level Switch","offer_id":51905214972268,"sku":"1036595","price":271.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Tank-Alert-EZ.webp?v=1742334960"},{"product_id":"sje-hitempmaster-mechanically-activated-pump-switch-for-high-temperature-sump-applications","title":"SJE HiTempMaster™ High Temperature Float Switch for Sump Pumps (Up to 200°F)","description":"\u003ch2\u003eReliable Pump Control for High Temperature Sump Applications\u003c\/h2\u003e\n\n\u003cp\u003eWhen standard float switches fail under heat, the \u003cstrong\u003eSJE HiTempMaster™ high temperature float switch\u003c\/strong\u003e is built to keep your system running reliably. Designed specifically for hot water and high-temperature sump environments, this mechanically activated pump switch provides consistent, automatic control in applications where temperatures can reach up to 200°F (93°C).\u003c\/p\u003e\n\n\u003cp\u003eFrom industrial wastewater and boiler discharge to high-temperature sump pits, the HiTempMaster™ provides reliable pump-down control, eliminating the risks of traditional float switches.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_HiTempMaster_High_Temperature_Float_Switch.png?v=1775565039\" alt=\"SJE HiTempMaster™ High Temperature Float Switch\"\u003e\n\n\u003ch2\u003eWhat This Float Switch Does\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSJE HiTempMaster™ pump switch\u003c\/strong\u003e automatically turns your pump on and off based on liquid level. As the float rises and falls, it activates a mechanical switch to control pump operation, helping prevent overflow, protect equipment, and maintain system efficiency.\u003c\/p\u003e\n\n\u003cp\u003eUnlike standard float switches, this model is engineered for high-heat environments, making it ideal for applications where elevated temperatures would otherwise cause premature failure.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a High Temperature Float Switch?\u003c\/h2\u003e\n\n\u003cp\u003eIn high-temperature sump systems:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eStandard float switches can warp, degrade, or fail\u003c\/li\u003e\n\u003cli\u003eElectrical components may become unreliable\u003c\/li\u003e\n\u003cli\u003ePump control becomes inconsistent or unsafe\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe HiTempMaster™ is designed to overcome these challenges with:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eHeat-resistant materials\u003c\/li\u003e\n\u003cli\u003eA protective float housing\u003c\/li\u003e\n\u003cli\u003eStable operation even in harsh conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis ensures accurate pump cycling and longer service life in demanding environments.\u003c\/p\u003e\n\n\u003ch2\u003eSJE HiTempMaster™ High Temperature Float Switch Key Features \u0026amp; Benefits\u003c\/h2\u003e\n\n\u003ch3\u003eBuilt for High Temperature Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRated for liquid temperatures up to 200°F (93°C)\u003c\/li\u003e\n\u003cli\u003eIdeal for hot water, industrial sump, and wastewater systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReliable Pump Control Performance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eControls pumps up to 13 FLA \/ 78 LRA (125V)\u003c\/li\u003e\n\u003cli\u003eSuitable for real-world pump loads, not light-duty applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTwin-Wall Float Housing Design\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtects internal components from heat and moisture\u003c\/li\u003e\n\u003cli\u003eHelps extend product lifespan in harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eStable Operation in Turbulent Conditions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot affected by rotation or fluid movement\u003c\/li\u003e\n\u003cli\u003ePerforms consistently in both calm and agitated sump pits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAdjustable Pumping Range\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWide operating range from 8 to 36 inches\u003c\/li\u003e\n\u003cli\u003eFlexible setup for different tank depths and configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMercury-Free Mechanical Activation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmentally safer alternative\u003c\/li\u003e\n\u003cli\u003eCompliant with regulations restricting mercury switches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDurable Construction\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-impact, corrosion-resistant polypropylene float\u003c\/li\u003e\n\u003cli\u003eBuilt for long-term use in wastewater applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\n\u003cp\u003eThis high-temperature float switch for sump pumps is commonly used in:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eIndustrial wastewater systems\u003c\/li\u003e\n\u003cli\u003eBoiler blowdown and discharge pits\u003c\/li\u003e\n\u003cli\u003eHot water processing systems\u003c\/li\u003e\n\u003cli\u003eCommercial sump pits with elevated temperatures\u003c\/li\u003e\n\u003cli\u003eSewage and water treatment environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation \u0026amp; Setup Insights\u003c\/h2\u003e\n\n\u003cp\u003eProper installation ensures reliable performance:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eTether length determines activation range\u003c\/li\u003e\n\u003cli\u003eMinimum tether length must be maintained for proper operation\u003c\/li\u003e\n\u003cli\u003eMount securely to the discharge pipe using the clamp system\u003c\/li\u003e\n\u003cli\u003eAlways test multiple pump cycles after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Application Notes\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safe and effective use:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eNot suitable for loads under 100 mA at 12 VAC\u003c\/li\u003e\n\u003cli\u003eMust be used with pumps that include thermal overload protection\u003c\/li\u003e\n\u003cli\u003eNot intended for pilot duty or control circuits\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for pump-down (emptying) applications only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eExplore Compatible Products and Accessories for the SJE HiTempMaster\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/products\/sje-pumpmaster-plus-15-amp-wide-angle-piggyback-plug-pump-float-switch-120-240v\"\u003eSJE PumpMaster Plus Float Switch\u003c\/a\u003e\u003c\/strong\u003e – View the standard version rated for up to 140°F (60°C) for less extreme environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/float-switches-and-accessories\"\u003eFloat Switches \u0026amp; Accessories\u003c\/a\u003e\u003c\/strong\u003e – Discover our complete range of float switches, brackets, cable weights, and accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/tank-alarm-systems\"\u003eTank Alarm Systems\u003c\/a\u003e\u003c\/strong\u003e – Browse compatible high\/low-level alarm panels and alert systems to pair with your float switch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Rating\u003c\/td\u003e\n\u003ctd\u003eUp to 200°F (93°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 13 FLA \/ 78 LRA (125V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Options\u003c\/td\u003e\n\u003ctd\u003e125V or 250V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePumping Range\u003c\/td\u003e\n\u003ctd\u003e8\" – 36\" adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat Material\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable\u003c\/td\u003e\n\u003ctd\u003e16 GA SJOOW, water-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Depth\u003c\/td\u003e\n\u003ctd\u003e33 ft (10 m) \/ 13 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eCSA \u0026amp; UL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eAvailable Configurations\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e125V or 250V models\u003c\/li\u003e\n\u003cli\u003eWith or without piggy-back plug\u003c\/li\u003e\n\u003cli\u003eMultiple cord lengths (10 ft, 20 ft, 30 ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOrder the SJE HiTempMaster™ High Temperature Float Switch\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e supplies the \u003cstrong\u003eSJE HiTempMaster™ high temperature float switch for sump pumps\u003c\/strong\u003e, with fast shipping across Canada and the USA.\u003c\/p\u003e\n\n\u003cp\u003eIf you're working with hot water systems, industrial wastewater, or high-temperature sump applications, this switch provides the durability and reliability needed to maintain safe and efficient pump control.\u003c\/p\u003e\n\n\u003cp\u003eLooking for additional solutions?\u003c\/p\u003e\n\n\u003cp\u003eCleanflow also offers a full range of \u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus control panels, alarms, and float switches\u003c\/a\u003e\u003c\/strong\u003e to complete your system.\u003c\/p\u003e\n\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a high temperature float switch?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA high temperature float switch is designed to operate in liquids above standard temperature limits (typically above 140°F). The HiTempMaster™ can handle up to 200°F, making it suitable for hot sump systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan this be used with a sump pump?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, this is a sump pump float switch specifically designed for pump-down applications in high-temperature sump systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat does “pump down” mean?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003ePump down refers to draining or emptying a tank or sump. This switch activates the pump as the liquid rises and turns it off once the level drops.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes this float switch contain mercury?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo. The HiTempMaster™ uses a mechanically activated design, making it safer and compliant with environmental regulations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan it operate in turbulent water?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. The switch is not sensitive to turbulence or rotation, allowing reliable operation in agitated environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is the pumping range?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe pumping range is adjustable between \u003cstrong\u003e8 and 36 inches\u003c\/strong\u003e, depending on tether length and installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes water temperature affect the float switch performance or pumping range?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. The pumping range of the SJE HiTempMaster™ can vary slightly depending on water temperature and installation setup. Higher temperatures can increase the operating range, so it’s recommended to observe several pump cycles after installation to ensure the float switch is performing as expected in your specific application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"10 Ft with Plug - 125V \/ Pump Down","offer_id":52035519611244,"sku":"1043545","price":126.09,"currency_code":"CAD","in_stock":true},{"title":"10 Ft wih Plug - 250V \/ Pump Down","offer_id":52035519644012,"sku":"1043548","price":129.39,"currency_code":"CAD","in_stock":true},{"title":"10 Ft without Plug (125\/250V) \/ Pump Down","offer_id":52035519676780,"sku":"1043551","price":114.48,"currency_code":"CAD","in_stock":true},{"title":"20 Ft with Plug - 125V \/ Pump Down","offer_id":52035519709548,"sku":"1043546","price":139.72,"currency_code":"CAD","in_stock":true},{"title":"20 Ft with Plug - 250V \/ Pump Down","offer_id":52035519742316,"sku":"1043549","price":142.82,"currency_code":"CAD","in_stock":true},{"title":"20 Ft without Plug (125\/250V) \/ Pump Down","offer_id":52035519775084,"sku":"1043554","price":127.89,"currency_code":"CAD","in_stock":true},{"title":"30 Ft with Plug - 125V \/ Pump Down","offer_id":52035525312876,"sku":"1043547","price":150.61,"currency_code":"CAD","in_stock":true},{"title":"30 Ft with Plug - 250V \/ Pump Down","offer_id":52035525345644,"sku":"1043550","price":153.9,"currency_code":"CAD","in_stock":true},{"title":"30 Ft without Plug (125\/250V) \/ Pump Down","offer_id":52035525378412,"sku":"1043555","price":138.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_HiTempMaster_High_Temperature_Float_Switch.webp?v=1775565860"},{"product_id":"sje-nex-series-simplex-pump-control-panel-single-phase-120-208-240v-nema-4x-enclosure-with-alarm-system","title":"SJE NEX Series Simplex Pump Control Panel – Single Phase, 120\/208\/240V, NEMA 4X with Alarm System","description":"\u003ch2\u003eCompact UL-Listed Simplex Pump Control Panel for Single-Phase Residential Sewage, Septic, and Water Transfer Applications\u003c\/h2\u003e\n\n\u003cp\u003eWhen a single residential pump needs reliable on\/off control with high-water alarm protection, the \u003cstrong\u003eSJE NEX Series simplex pump control panel\u003c\/strong\u003e handles it. The compact 8\" x 6\" x 4\" NEMA 4X panel manages one 120\/208\/240V single-phase pump using float switches and triggers an audible\/visual alarm at high level.\u003c\/p\u003e\n\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Simplex (single pump) control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 120 \/ 208 \/ 240V single phase, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 0–12 amps (also available in 9–20 amps)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Control Voltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Horn:\u003c\/strong\u003e 85–90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e UL \/ cUL Listed (UL 508A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features of the SJE NEX Series Simplex Pump Control Panel\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eUniversal 120\/208\/240V single-phase compatibility lets one panel cover three voltage configurations without separate SKUs.\u003c\/li\u003e\n\n\u003cli\u003eNEMA 4X UV-stabilized thermoplastic enclosure withstands moisture, dust, corrosion, and outdoor sun exposure for indoor or outdoor mounting.\u003c\/li\u003e\n\n\u003cli\u003eHand-Off-Auto (HOA) switch supports manual pump test and bypass when troubleshooting float behavior or running a forced pump-down.\u003c\/li\u003e\n\n\u003cli\u003eStandard alarm package includes a red 360° beacon, 85–90 dB horn, and exterior test\/silence push button alarm auto-resets after the high-level condition clears.\u003c\/li\u003e\n\n\u003cli\u003eAuxiliary alarm contacts (Form C, 5A at 120 VAC max) signal external monitoring devices for remote notification on this simplex pump control panel.\u003c\/li\u003e\n\n\u003cli\u003ePadlockable latch and integral mounting feet keep installation fast and the enclosure secured against tampering in unattended residential installs.\u003c\/li\u003e\n\n\u003cli\u003ePump run indicator and float status indicator lights give at-a-glance visibility into operating state without opening the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSJE Rhombus\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEX Series®\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSimplex — controls one single-phase pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 \/ 208 \/ 240V single phase, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl \/ Alarm Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 \/ 208 \/ 240V single phase, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Amperage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0–12 amps or 9–20 amps (model-dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloat Control Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloat Switches\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompatible with three (3) normally open SJE SignalMaster® control switches (stop, start, alarm), sold with floats or panel-only\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8\" x 6\" x 4\" (20.32 x 15.24 x 10.16 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePadlockable NEMA 4X, UV-stabilized thermoplastic with integral mounting feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndoor or outdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm Beacon\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRed LED, 360° visual indication\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm Horn\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85–90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm Reset\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAutomatic after high-level condition clears\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAuxiliary Alarm Contacts\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eForm C, 5 amp, 120 VAC maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHOA Switch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHand-Off-Auto for manual pump control\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIndicator Lights\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreen pump run light, control\/alarm power indicator, float status (stop\/start) lights\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCircuit Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePump branch circuit breaker plus separate control\/alarm fuses\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Relay Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMinimum 5,000,000 mechanical cycles \/ 100,000 electrical cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL \/ cUL Listed to UL 508A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShip Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.27 kg (panel only) \/ 4.08 kg (with floats)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePerformance Overview\u003c\/h3\u003e\n\n\u003cp\u003eThe NEX simplex pump control panel runs a three-float sequence: stop, start, alarm, switch pump power on demand, and trigger visual and audible alerts at high level.\u003c\/p\u003e\n\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_NEX_Series_Simplex_Pump_Control_Panel.png?v=1778319292\" alt=\"SJE NEX Series Simplex Pump Control Panel\"\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Internal Components\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUV-stabilized thermoplastic, NEMA 4X-rated, hinged door with neoprene gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegral mounting feet; padlockable latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Circuit Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThermal magnetic circuit breaker sized to the NEC interrupt and amp rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Relay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSwitches pump power; rated for pump horsepower\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl Logic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrinted circuit board (PCB) eliminates conventional wiring inside the controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl \/ Alarm Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSeparately fused control and alarm circuits\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHOA Switch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCB-mounted Hand-Off-Auto selector for manual or automatic operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIndicators\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreen pump run light, green control\/alarm power indicator, red float status lights (stop\/start), red alarm beacon\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLED beacon (360°), 85–90 dB horn, exterior test\/silence push button, Form C auxiliary contacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eField Wiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTerminal block; ground lug provided\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOptional\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eElapsed Time Meter (ETM) variants available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eResidential septic systems with single submersible effluent pumps\u003c\/li\u003e\n\u003cli\u003eResidential and light-commercial sewage ejector pump installations\u003c\/li\u003e\n\u003cli\u003eSingle-pump lift stations in low-flow service areas\u003c\/li\u003e\n\u003cli\u003eSump and dewatering pump control where a high-water alarm is required by code or AHJ\u003c\/li\u003e\n\u003cli\u003eWater transfer and graywater pumping in residential properties\u003c\/li\u003e\n\u003cli\u003eReplacement controller for failed direct-wire single-pump installs needing alarm separation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose the SJE NEX Series Simplex Pump Control Panel?\u003c\/h3\u003e\n\n\u003cp\u003eThe NEX Series simplex pump control panel keeps a single residential pump running on a separate circuit from its high-water alarm, the layout most installers and inspectors expect on septic and sewage systems.\u003c\/p\u003e\n\n\u003ch3\u003eBuy SJE NEX Series Simplex Pump Control Panels Online from Cleanflow\u003c\/h3\u003e\n\n\u003cp\u003eAs a trusted distributor of \u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus products\u003c\/a\u003e, Cleanflow stocks the SJE NEX Series simplex pump control panel in both panel-only and floats-included configurations. We ship across Canada and the USA, and our technical staff are available to help you confirm the correct amperage range, float configuration, sizing, and wiring for your installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdd to cart today or contact the Cleanflow team with any questions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat does a simplex pump control panel do?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA simplex panel controls one pump. It uses float switches to start and stop the pump based on liquid level, runs the alarm circuit on a separate breaker, and triggers an audible and visual alert if water reaches the high-level float.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat voltages does the NEX Series panel support?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt handles 120V, 208V, and 240V single-phase power on the same panel. No need to spec a separate model per voltage. Both pump power and control\/alarm power use the same 120\/208\/240V single-phase, 50\/60 Hz feed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan the panel be installed outdoors?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. The NEMA 4X UV-stabilized thermoplastic enclosure is rated for indoor or outdoor mounting and resists corrosion, windblown dust, rain, and hose-directed water. Use proper conduit sealing to keep gas and moisture out of the enclosure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is the HOA switch, and when do I use it?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eHOA stands for Hand-Off-Auto. Hand runs the pump manually for testing or pump-down. Off disables the pump (alarm stays active). Auto returns to normal float-controlled operation. Use Hand to test pump function during commissioning or troubleshooting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes the panel come with float switches?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eTwo configurations: panel-only (Cleanflow part 1047662 \/ 1047663) for installers using existing or third-party floats, or with three SJE SignalMaster control switches on 20-foot leads (1046436 \/ 1046437). Confirm float type before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this panel rated for commercial or industrial use?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe NEX Series is built for residential and light-duty applications. For commercial lift stations, larger pump amperage, or duplex (two-pump alternating) configurations, look at the SJE NEX Series Duplex panel or step up to a larger SJE Rhombus controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow loud is the alarm horn?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe integrated horn is rated 85–90 dB at the unit. The 360° red LED beacon provides a visual indication. The exterior test\/silence push button lets the operator silence the horn during the high-level event. The alarm auto-resets when the level drops.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is the warranty?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eSJE Rhombus backs the NEX Series simplex panel with a 5-Year Limited Warranty. Warranty is void if the panel is modified. Installation must follow the included instructions and applicable electrical codes (NFPA-70, provincial, and local).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"120\/208\/240V Panel \/ 0-12 Amps \/ Panel Only (No Floats)","offer_id":53630687248748,"sku":"1047662","price":632.12,"currency_code":"CAD","in_stock":true},{"title":"120\/208\/240V Panel \/ 0-12 Amps \/ With (3) 20-Ft Floats","offer_id":53630687281516,"sku":"1046436","price":721.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_NEX_Series_Simplex_Pump_Control_Panel_Single_Phase.png?v=1778319824"},{"product_id":"sje-nex-series-duplex-pump-control-panel-single-phase-120-208-240v-nema-4x-with-alternating-control-alarm","title":"SJE NEX Series Duplex Pump Control Panel – Single Phase, 120\/208\/240V, NEMA 4X with Alternating Control \u0026 Alarm","description":"\u003ch2\u003eCompact UL-Listed Duplex Pump Control Panel With Alternating Control and Override for Residential Sewage and Water Installations\u003c\/h2\u003e\n\n\u003cp\u003eWhen two pumps need to share the load, the SJE NEX Series duplex pump control panel handles it. The compact 10\" x 8\" x 4\" NEMA 4X panel alternates two 120\/208\/240V single-phase pumps to equalize wear, runs override if either pump fails, and triggers an audible\/visual alarm at high level.\u003c\/p\u003e\n\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Duplex (two-pump alternating with override)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 120 \/ 208 \/ 240V single phase, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 0–12 amps or 9–20 amps (model-dependent)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 10\" x 8\" x 4\" NEMA 4X UV-stabilized thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Control Voltage:\u003c\/strong\u003e 12 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Horn:\u003c\/strong\u003e 85–90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuxiliary Alarm Contacts:\u003c\/strong\u003e Form C, 5 amp, 120 VAC max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e UL \/ cUL Listed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features of the SJE NEX Series Duplex Pump Control Panel\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eAlternating pump control equalizes wear across two pumps, so neither runs as the dedicated lead.\u003c\/li\u003e\n\n\u003cli\u003eOverride control activates the second pump. If either pump fails, the system keeps moving liquid even with a single-pump fault.\u003c\/li\u003e\n\n\u003cli\u003eUniversal 120\/208\/240V single-phase compatibility lets one panel cover three voltage configurations without separate SKUs.\u003c\/li\u003e\n\n\u003cli\u003eNEMA 4X UV-stabilized thermoplastic enclosure withstands moisture, dust, corrosion, and outdoor sun exposure for indoor or outdoor mounting.\u003c\/li\u003e\n\n\u003cli\u003eHOA (Hand-Off-Auto) switches per pump for manual test, bypass, or shutdown when troubleshooting float behavior.\u003c\/li\u003e\n\n\u003cli\u003eStandard alarm package: red 360° beacon, 85–90 dB horn, exterior test\/silence push button auto-resets after high-level condition clears.\u003c\/li\u003e\n\n\u003cli\u003eAuxiliary alarm contacts (Form C, 5A at 120 VAC max) signal external monitoring devices for remote notification.\u003c\/li\u003e\n\n\u003cli\u003eOperates with three or four float switches (Stop, Lead, Lag, Alarm), three-float and four-float package options ship from the factory with 20-ft SJE SignalMaster control switches.\u003c\/li\u003e\n\n\u003cli\u003ePadlockable latch and integral mounting feet keep installation fast, and the enclosure secured against tampering.\u003c\/li\u003e\n\n\u003cli\u003eOptional Elapsed Time Meter (ETM) variants log individual pump run-time in hours for maintenance scheduling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSJE NEX Duplex Pump Control Panel Specifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSJE Rhombus\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNEX Series®\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDuplex — two-pump alternating with override\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 \/ 208 \/ 240V single phase, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl \/ Alarm Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 \/ 208 \/ 240V single phase, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Amperage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0–12 amps or 9–20 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloat Control Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloat Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThree or four floats (Stop, Lead, Lag, Alarm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10\" x 8\" x 4\" (25 x 20 x 10 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePadlockable NEMA 4X, UV-stabilized thermoplastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndoor or outdoor\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm Beacon\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRed LED, 360° visual\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm Horn\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85–90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAuxiliary Alarm Contacts\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eForm C, 5 amp, 120 VAC max\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHOA Switches\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHand-Off-Auto, one per pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIndicator Lights\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePump run, control\/alarm power, float status\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCircuit Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThermal-magnetic breaker per pump + control\/alarm fuses\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOptional\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eElapsed Time Meter (ETM) variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL \/ cUL Listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePatent\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eU.S. Patent No. 10,251,284\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-Year Limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePerformance Overview\u003c\/h3\u003e\n\n\u003cp\u003eStop and Lead floats run the lead pump on demand. If the level keeps rising, the Lag float starts the second pump. The Alarm float triggers visual and audible alerts.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Internal Components\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUV-stabilized thermoplastic, NEMA 4X, hinged door\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegral mounting feet; padlockable latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePump Circuit Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo thermal-magnetic circuit breakers (one per pump)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Relays\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo relays — alternate between pumps\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl Logic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCB-based alternator with override on pump fail\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl \/ Alarm Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSeparately fused control and alarm circuits\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHOA Switches\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo PCB-mounted Hand-Off-Auto selectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIndicators\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePump run (×2), power, float status, alarm beacon\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLED beacon (360°), 85–90 dB horn, test\/silence button, Form C contacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eField Wiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTerminal block; ground lug provided\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOptional\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eElapsed Time Meter — logs run-time per pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eResidential septic systems with two submersible effluent pumps\u003c\/li\u003e\n\u003cli\u003eSewage and effluent pump installations needing redundancy and load balancing\u003c\/li\u003e\n\u003cli\u003eTwo-pump lift stations in low-flow service areas where pump rotation is required\u003c\/li\u003e\n\u003cli\u003eLarger residential or light-commercial sumps with high-volume cycling\u003c\/li\u003e\n\u003cli\u003eReplacement controller for failed direct-wire two-pump installs needing alternation and override\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose the SJE NEX Series Duplex Pump Control Panel?\u003c\/h3\u003e\n\n\u003cp\u003eThe NEX Series duplex panel keeps two residential pumps cycling evenly, with override protection if one pump fails. The layout most installers and inspectors expect on duplex septic and sewage systems.\u003c\/p\u003e\n\n\u003ch4\u003ePairs Well With\u003c\/h4\u003e\n\n\u003cp\u003eSingle-pump installation? Take a look at the \u003ca href=\"https:\/\/cleanflow.net\/products\/sje-nex-series-simplex-pump-control-panel-single-phase-120-208-240v-nema-4x-enclosure-with-alarm-system\"\u003eSJE NEX Series simplex pump control panel\u003c\/a\u003e, same enclosure family and alarm package, sized for a single-pump system.\u003c\/p\u003e\n\n\u003cp\u003eFor high-water alerting on tanks not paired with a pump, browse the \u003ca href=\"https:\/\/cleanflow.net\/collections\/tank-alarm-systems\"\u003etank alarm systems\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003ch3\u003eBuy SJE NEX Series Duplex Pump Control Panels Online from Cleanflow\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e\u003c\/strong\u003e stocks the SJE NEX Series duplex pump control panel in panel-only, three-float, and four-float configurations, and ships across Canada and the USA. Add to cart, or contact the Cleanflow team to confirm amperage range and float configuration for your install.\u003c\/p\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat does a duplex pump control panel do?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA duplex panel runs two pumps from a single controller. It alternates which pump runs first to balance wear, brings in the second pump when the liquid level reaches the lag float, and triggers an alarm if the level keeps rising. If one pump fails, the override puts the working pump on duty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow many float switches does the NEX Series duplex panel use?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThree or four. A three-float setup uses Stop, Lead\/Lag (combined), and Alarm. A four-float setup uses Stop, Lead, Lag, and Alarm separately. Cleanflow's SKU options ship as panel-only, with three 20-ft SJE SignalMaster floats, or with four 20-ft floats.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat voltages does the NEX Series duplex panel support?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt handles 120V, 208V, and 240V single-phase power on the same panel. There is no need to spec a separate model per voltage. Both pump power and control\/alarm power use the same 120\/208\/240V single-phase, 50\/60 Hz feed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is override control, and when does it activate?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIf either pump fails to run when called, the panel's override logic activates the working pump to keep liquid moving. The system was designed so that a single pump fault doesn't stop pumping useful for residential sewage, where a flooded basement is the alternative.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan the panel be installed outdoors?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. The NEMA 4X UV-stabilized thermoplastic enclosure is rated for indoor or outdoor mounting and resists corrosion, windblown dust, rain, and hose-directed water. Use proper conduit sealing to keep gas and moisture out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is the difference between this and the NEX Series simplex panel?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe simplex panel runs one pump. The duplex panel runs two pumps with alternating control and override. If you only have one pump, choose simplex; if you have two pumps and need redundancy or load balancing, choose duplex.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes the panel come with an Elapsed Time Meter (ETM)?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eETM is optional. ETM-equipped variants log individual run-time per pump in hours, which is useful for predictive maintenance and pump-warranty tracking. Standard variants don't include ETMs. Confirm the part number when ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is the warranty?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus\u003c\/a\u003e backs the NEX Series duplex panel with a 5-Year Limited Warranty. Warranty is void if the panel is modified. Installation must follow the included instructions and applicable electrical codes (NFPA-70, provincial, and local) by a licensed electrician.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"120\/208\/240V Panel \/ 0-12 Amps \/ Panel Only (No Floats)","offer_id":53630707564908,"sku":"1051632","price":1168.72,"currency_code":"CAD","in_stock":true},{"title":"120\/208\/240V Panel \/ 0-12 Amps \/ With (3) 20-Ft Floats","offer_id":53630707597676,"sku":"1051631","price":1306.62,"currency_code":"CAD","in_stock":true},{"title":"120\/208\/240V Panel \/ 0-12 Amps \/ With (4) 20-Ft Floats","offer_id":53630707630444,"sku":"1051630","price":1364.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_NEX_Duplex_Pump_Control_Panel_Single_Phase_Cleanflow.png?v=1778320165"},{"product_id":"sje-signalmaster-narrow-angle-float-switch-mechanically-activated-pump-control-switch-normally-open-closed-options","title":"SJE SignalMaster Narrow-Angle Float Switch – Mechanically Activated Pump Control Switch, Normally Open \/ Normally Closed Options","description":"\u003ch2\u003eMechanically Activated Narrow-Angle Float Switch for Precise Liquid Level Control in Sewage, Water, and Pump Panel Applications\u003c\/h2\u003e\n\n\u003cp\u003eWhen a pump control panel needs a precise on\/off signal from tight water-level changes, the SJE SignalMaster narrow-angle float switch handles it. The mechanically activated 1.5\" control differential delivers reliable snap-action switching for high-level alarms, low-level shutdown, and pump start\/stop in sewage and water applications.\u003c\/p\u003e\n\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Mechanically activated narrow-angle control switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurations:\u003c\/strong\u003e Normally Open (yellow cap) or Normally Closed (white cap)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Lengths Available:\u003c\/strong\u003e 10 ft and 20 ft (18 AWG, 2-conductor SJOW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Differential:\u003c\/strong\u003e 1.5\" above or below the horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical:\u003c\/strong\u003e 5 amps at 125\/250 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Material:\u003c\/strong\u003e High-impact polypropylene (corrosion-resistant)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat Size:\u003c\/strong\u003e 2.74\" diameter x 4.83\" length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e UL Listed (water and sewage), CSA Certified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features of the SJE SignalMaster Narrow-Angle Float Switch\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eMechanically activated snap-action contacts deliver consistent, repeatable switching without mercury, meeting jurisdictions that restrict mercury float switches.\u003c\/li\u003e\n\n\u003cli\u003eThe narrow 1.5\" control differential provides precise liquid level control in confined sumps, basins, and lift stations where wide-angle \u003ca href=\"https:\/\/cleanflow.net\/collections\/float-switches-and-accessories\"\u003efloat switches\u003c\/a\u003e overshoot.\u003c\/li\u003e\n\n\u003cli\u003eColor-coded caps for fast identification on multi-float installs: yellow = normally open (high level), white = normally closed (low level).\u003c\/li\u003e\n\n\u003cli\u003eRotation-insensitive design means the float operates correctly regardless of how it spins on its tether, resulting in fewer service calls from twisted cables.\u003c\/li\u003e\n\n\u003cli\u003eHigh-impact polypropylene housing resists corrosion in raw sewage, effluent, and non-potable water at temperatures up to 140°F.\u003c\/li\u003e\n\n\u003cli\u003eSubmersible to 30 feet (9 m) at 13 PSI for deep-well and lift-station service.\u003c\/li\u003e\n\n\u003cli\u003eCompatible with simplex and duplex pump control panels (including the \u003ca href=\"https:\/\/cleanflow.net\/products\/sje-nex-series-simplex-pump-control-panel-single-phase-120-208-240v-nema-4x-enclosure-with-alarm-system\"\u003eSJE NEX Series simplex panel\u003c\/a\u003e), and with high-water alarm systems requiring a dry-contact input.\u003c\/li\u003e\n\n\u003cli\u003eIncludes mounting clamp for pipe-mount installs; \u003ca href=\"https:\/\/cleanflow.net\/products\/sje-adjustable-float-switch-cable-weight\"\u003eexternally weighted\u003c\/a\u003e variants available for suspended applications (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSJE Rhombus\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSignalMaster®\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSwitch Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMechanically activated, snap-action contacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNormally Open (high level, pump-down) yellow cap; Normally Closed (low level, pump-up) white cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl Differential\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 inches (4 cm) above or below the horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElectrical Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 amps at 125\/250 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18 AWG, 2-conductor SJOW (UL, CSA), water-resistant CPE jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Lengths Available\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 ft and 20 ft (manufacturer also offers 15 ft and 30 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloat Housing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-impact polypropylene, corrosion-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloat Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.74\" diameter x 4.83\" length (7.0 x 12.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Liquid Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e140°F (60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 ft (9 m), 13 PSI (90 kPa) — IPX8\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Method\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting clamp included (pipe-mount); externally weighted variant available separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRotation Sensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot sensitive to rotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApproved Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSewage, wastewater, and non-potable water\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot Recommended For\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eElectrical loads under 100 mA, 12 VAC, or non-arcing electrical loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL Listed for water and sewage; CSA Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation Standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInstalls per NEC \/ ANSI\/NFPA 70 — qualified electrician required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePerformance Overview\u003c\/h3\u003e\n\n\u003cp\u003eIn a normally open install, the float closes the circuit when it tips above horizontal, and the pump turns on at high level. Normally closed reverses that for pump-up or low-level shutdown.\u003c\/p\u003e\n\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_SignalMaster_Narrow-Angle_Float_Switch.png?v=1778320430\" alt=\"SJE SignalMaster Narrow-Angle Float Switch\"\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Materials\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFloat Housing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-impact polypropylene, sealed against sewage and wastewater ingress\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSwitch Mechanism\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMechanically activated micro-switch, no mercury, no glass tubes\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Jacket\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSJOW water-resistant CPE for outdoor and submerged service\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Conductors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18 AWG, 2-conductor (UL, CSA listed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor Cap\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYellow (NO) or White (NC) molded into housing for permanent identification\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting Hardware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18-8 stainless steel hose clamp included with pipe-clamp variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIngress Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIPX8 to 10 m water depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSuitable Installation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCategory II, rated to 60°C, double-insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSewage and wastewater systems pump-down control on residential and light-commercial lift stations\u003c\/li\u003e\n\u003cli\u003eSimplex and duplex pump control panels (factory-paired with the SJE NEX Series simplex panel as stop, start, and alarm floats)\u003c\/li\u003e\n\u003cli\u003eHigh-level alarm float for tank alarm systems and overflow protection\u003c\/li\u003e\n\u003cli\u003eLow-level shutdown protection for pumps to prevent dry-running and motor damage\u003c\/li\u003e\n\u003cli\u003eLift stations, dose tanks, and effluent basins where precise on\/off control matters\u003c\/li\u003e\n\u003cli\u003eReplacement float for existing SJE installs and competitor narrow-angle controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose the SJE SignalMaster Narrow-Angle Float Switch?\u003c\/h3\u003e\n\n\u003cp\u003eThe SignalMaster is the float SJE Rhombus, which pairs with its own NEX Series simplex and duplex panels. Installers ordering replacement floats for SJE-equipped lift stations get a known-good fit. The 1.5\" differential, snap-action mechanical switching, and rotation-insensitive design hold up in real wastewater service.\u003c\/p\u003e\n\n\u003ch3\u003eBuy SJE SignalMaster Narrow-Angle Float Switches Online from Cleanflow\u003c\/h3\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/cleanflow.net\/\"\u003eCleanflow\u003c\/a\u003e stocks SignalMaster as a recognized \u003ca href=\"https:\/\/cleanflow.net\/collections\/sje-rhombus\"\u003eSJE Rhombus\u003c\/a\u003e distributor and ships across Canada and the USA. Add to cart, or contact the Cleanflow team to confirm cable length and float configuration for your install.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor multi-float installs running stop, start, and alarm sequences, pair this float with the \u003ca href=\"https:\/\/cleanflow.net\/products\/sje-stainless-steel-four-float-bracket\"\u003eSJE stainless steel four-float bracket\u003c\/a\u003e to keep cables organized and floats properly spaced.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is a narrow-angle float switch?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eA float switch that activates with minimal movement, about 1.5 inches above or below horizontal, instead of the larger swing required by wide-angle floats. Narrow-angle floats are used as control switches in tight basins or where precise on\/off levels matter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat's the difference between normally open and normally closed?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNormally Open (NO, yellow cap): the switch closes when the float tips above horizontal, used for high-level alarms and pump-down control. Normally Closed (NC, white cap): the switch closes when the float drops below horizontal, used for low-level shutdown or pump-up filling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhich cable length should I order — 10 ft or 20 ft?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eMatch cable length to the distance between the float position in the basin and the pump control panel or junction box, with a few feet of slack. 10 ft suits short residential runs; 20 ft covers most lift-station and septic tank installs. Splicing inside a sealed junction box is acceptable per the installation manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs this switch suitable for sewage applications?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. The polypropylene housing and SJOW cable are rated for sewage and non-potable water up to 140°F (60°C), submersible to 30 ft. UL Listed for water and sewage, CSA Certified.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes it work with my SJE NEX Series simplex pump control panel?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes, SJE SignalMaster is the standard control switch SJE Rhombus pairs with its NEX Series panels. Three SignalMaster floats wire to the panel as stop, start, and alarm. Cleanflow also stocks the NEX panel package with floats included, if you need both.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan it control low-voltage circuits?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo. The switch is not recommended for electrical loads under 100 milliamps, 12 VAC, or non-arcing loads. For low-current AC\/DC potable water control, look at the SJE MilliAmpMaster WPS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan the float be suspended from above instead of being pipe-mounted?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eThe SKU listed here includes a stainless steel mounting clamp for pipe-mount installs. SJE also offers an externally weighted variant (SGMWENO \/ SGMWENC) for suspended applications. Contact Cleanflow if you need that configuration. For suspended installs without pipe-mount access, use an \u003ca href=\"https:\/\/cleanflow.net\/collections\/pump-accessories\/products\/sje-adjustable-float-switch-cable-weight\"\u003eadjustable float switch cable weight\u003c\/a\u003e to create a precise pivot point and set the switch activation level.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat is the warranty?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eSJE Rhombus backs the SignalMaster with a 5-Year Limited Warranty. Installation must follow the SJE installation instructions and applicable electrical codes (NEC \/ ANSI NFPA-70, plus provincial and local) by a licensed electrician.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"SJE Rhombus","offers":[{"title":"Normally Open - 10-Ft Cable","offer_id":53630745149804,"sku":"1006042","price":71.74,"currency_code":"CAD","in_stock":true},{"title":"Normally Open - 20-Ft Cable","offer_id":53630745182572,"sku":"1006044","price":100.12,"currency_code":"CAD","in_stock":true},{"title":"Normally Closed - 10-Ft Cable","offer_id":53630745215340,"sku":"1006046","price":71.74,"currency_code":"CAD","in_stock":true},{"title":"Normally Closed - 20-Ft Cable","offer_id":53630745248108,"sku":"1006048","price":100.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJE_SignalMaster_Narrow.png?v=1778320612"},{"product_id":"sje-wellzone-3-wire-digital-well-pump-control-panel-pressure-based-controller-with-transducer-nema-4x-single-phase","title":"SJE WellZone® 3-Wire Digital Well Pump Control Panel – Pressure-Based Controller with Transducer, NEMA 4X, Single Phase","description":"\u003ch2 data-section-id=\"vrve6j\" data-start=\"287\" data-end=\"378\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"290\" data-end=\"378\"\u003eSmart Digital Well Pump Control Panel – Replaces Traditional Pressure Switch Systems\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp data-start=\"380\" data-end=\"582\"\u003eThe SJE WellZone® 3-Wire Control Panel is a digital pressure-based controller designed to replace outdated mechanical pressure switches in single-phase, 3-wire submersible well pump systems.\u003c\/p\u003e\n\u003cp data-start=\"584\" data-end=\"901\"\u003eUsing an included 0–150 PSI pressure transducer, the WellZone® continuously monitors system pressure and automatically starts and stops the pump based on adjustable setpoints. This results in more accurate pressure control, fewer system issues, and improved pump protection compared to traditional setups.\u003c\/p\u003e\n\u003cp data-start=\"903\" data-end=\"1161\"\u003eThe built-in LCD display and intuitive rotary control provide real-time system visibility and easy programming, while advanced features like dry run protection, rapid cycle prevention, and alarm tracking help protect your pump and extend system life.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.9632%;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 16.4816%;\"\u003e SFA\u003c\/td\u003e\n\u003ctd style=\"width: 16.4816%;\"\u003eRun Cap (MFD)\u003c\/td\u003e\n\u003ctd style=\"width: 16.3063%;\"\u003eStart Cap (MFD)\u003c\/td\u003e\n\u003ctd style=\"width: 16.3063%;\"\u003eBreaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.9632%;\"\u003e1\/2 HP - 230V\u003c\/td\u003e\n\u003ctd style=\"width: 16.4816%;\"\u003e4.3\u003c\/td\u003e\n\u003ctd style=\"width: 16.4816%;\"\u003e15\u003c\/td\u003e\n\u003ctd style=\"width: 16.3063%;\"\u003e43-53\u003c\/td\u003e\n\u003ctd style=\"width: 16.3063%;\"\u003e15A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.9632%;\"\u003e3\/4 HP - 230V\u003c\/td\u003e\n\u003ctd style=\"width: 16.4816%;\"\u003e5.7\u003c\/td\u003e\n\u003ctd style=\"width: 16.4816%;\"\u003e23\u003c\/td\u003e\n\u003ctd style=\"width: 16.3063%;\"\u003e59-71\u003c\/td\u003e\n\u003ctd style=\"width: 16.3063%;\"\u003e20A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 32.9632%;\"\u003e1 HP - 230V\u003c\/td\u003e\n\u003ctd style=\"width: 16.4816%;\"\u003e8.1\u003c\/td\u003e\n\u003ctd style=\"width: 16.4816%;\"\u003e23\u003c\/td\u003e\n\u003ctd style=\"width: 16.3063%;\"\u003e86-103\u003c\/td\u003e\n\u003ctd style=\"width: 16.3063%;\"\u003e20A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr data-start=\"1163\" data-end=\"1166\"\u003e\n\u003ch2 data-section-id=\"1j5qwet\" data-start=\"1168\" data-end=\"1187\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"1171\" data-end=\"1187\"\u003eKey Features\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul data-start=\"1189\" data-end=\"1733\"\u003e\n\u003cli data-section-id=\"ju2m3u\" data-start=\"1189\" data-end=\"1262\"\u003eDigital pressure-based pump control (no pressure switch required)\u003c\/li\u003e\n\u003cli data-section-id=\"1w20qps\" data-start=\"1263\" data-end=\"1309\"\u003eIncludes 0–150 PSI pressure transducer\u003c\/li\u003e\n\u003cli data-section-id=\"9al8uo\" data-start=\"1310\" data-end=\"1358\"\u003eAdjustable start\/stop pressure setpoints\u003c\/li\u003e\n\u003cli data-section-id=\"11jedvv\" data-start=\"1359\" data-end=\"1394\"\u003eFactory preset at 40\/60 PSI\u003c\/li\u003e\n\u003cli data-section-id=\"rii1rg\" data-start=\"1395\" data-end=\"1441\"\u003eLCD display with real-time system data\u003c\/li\u003e\n\u003cli data-section-id=\"g6ypf\" data-start=\"1442\" data-end=\"1503\"\u003eRotary selector for simple navigation and programming\u003c\/li\u003e\n\u003cli data-section-id=\"1gclshk\" data-start=\"1504\" data-end=\"1545\"\u003eBuilt-in pump protection features\u003c\/li\u003e\n\u003cli data-section-id=\"bbuddp\" data-start=\"1546\" data-end=\"1605\"\u003eAuxiliary alarm relay with high\/low pressure alerts\u003c\/li\u003e\n\u003cli data-section-id=\"d7a9js\" data-start=\"1606\" data-end=\"1663\"\u003eNEMA 4X enclosure for indoor\/outdoor installation\u003c\/li\u003e\n\u003cli data-section-id=\"11cx755\" data-start=\"1664\" data-end=\"1733\"\u003eComplete motor start components included (capacitors \u0026amp; relay)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" height=\"786\" width=\"477\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/WellZone_Graphic_Diagram.jpg?v=1776719355\"\u003e\u003c\/p\u003e\n\u003chr data-start=\"1735\" data-end=\"1738\"\u003e\n\u003ch2 data-section-id=\"1uzs2k2\" data-start=\"1740\" data-end=\"1779\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"1743\" data-end=\"1779\"\u003eAdvanced Protection \u0026amp; Monitoring\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul data-start=\"1781\" data-end=\"2203\"\u003e\n\u003cli data-section-id=\"1o9pi07\" data-start=\"1781\" data-end=\"1856\"\u003e\n\u003cstrong data-start=\"1783\" data-end=\"1805\"\u003eDry Run Protection\u003c\/strong\u003e – prevents pump damage from low water conditions\u003c\/li\u003e\n\u003cli data-section-id=\"vpp6ud\" data-start=\"1857\" data-end=\"1921\"\u003e\n\u003cstrong data-start=\"1859\" data-end=\"1885\"\u003eRapid Cycle Protection\u003c\/strong\u003e – reduces wear from short cycling\u003c\/li\u003e\n\u003cli data-section-id=\"vzl3y\" data-start=\"1922\" data-end=\"1976\"\u003e\n\u003cstrong data-start=\"1924\" data-end=\"1947\"\u003eWell Recharge Timer\u003c\/strong\u003e – protects low-yield wells\u003c\/li\u003e\n\u003cli data-section-id=\"14onwv5\" data-start=\"1977\" data-end=\"2033\"\u003e\n\u003cstrong data-start=\"1979\" data-end=\"2003\"\u003ePump Amps Monitoring\u003c\/strong\u003e – tracks system performance\u003c\/li\u003e\n\u003cli data-section-id=\"1bo9rb2\" data-start=\"2034\" data-end=\"2101\"\u003e\n\u003cstrong data-start=\"2036\" data-end=\"2065\"\u003eRun Time \u0026amp; Cycle Tracking\u003c\/strong\u003e – helps with maintenance planning\u003c\/li\u003e\n\u003cli data-section-id=\"fkaerk\" data-start=\"2102\" data-end=\"2161\"\u003e\n\u003cstrong data-start=\"2104\" data-end=\"2129\"\u003eAlarm History Logging\u003c\/strong\u003e – identifies recurring issues\u003c\/li\u003e\n\u003cli data-section-id=\"dbqkp9\" data-start=\"2162\" data-end=\"2203\"\u003e\u003cstrong data-start=\"2164\" data-end=\"2201\"\u003eWater Filter Replacement Reminder\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2205\" data-end=\"2208\"\u003e\n\u003ch2 data-section-id=\"q11yyz\" data-start=\"2210\" data-end=\"2231\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"2213\" data-end=\"2231\"\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable data-start=\"2233\" data-end=\"2787\" class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead data-start=\"2233\" data-end=\"2254\"\u003e\n\u003ctr data-start=\"2233\" data-end=\"2254\"\u003e\n\u003cth data-start=\"2233\" data-end=\"2245\" data-col-size=\"sm\" class=\"\"\u003eAttribute\u003c\/th\u003e\n\u003cth data-start=\"2245\" data-end=\"2254\" data-col-size=\"sm\" class=\"\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-start=\"2277\" data-end=\"2787\"\u003e\n\u003ctr data-start=\"2277\" data-end=\"2324\"\u003e\n\u003ctd data-start=\"2277\" data-end=\"2291\" data-col-size=\"sm\"\u003eApplication\u003c\/td\u003e\n\u003ctd data-start=\"2291\" data-end=\"2324\" data-col-size=\"sm\"\u003e3-Wire Submersible Well Pumps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2325\" data-end=\"2349\"\u003e\n\u003ctd data-start=\"2325\" data-end=\"2333\" data-col-size=\"sm\"\u003ePhase\u003c\/td\u003e\n\u003ctd data-start=\"2333\" data-end=\"2349\" data-col-size=\"sm\"\u003eSingle-Phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2350\" data-end=\"2401\"\u003e\n\u003ctd data-start=\"2350\" data-end=\"2368\" data-col-size=\"sm\"\u003ePressure Sensor\u003c\/td\u003e\n\u003ctd data-start=\"2368\" data-end=\"2401\" data-col-size=\"sm\"\u003e0–150 PSI Transducer Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2402\" data-end=\"2451\"\u003e\n\u003ctd data-start=\"2402\" data-end=\"2421\" data-col-size=\"sm\"\u003eDefault Settings\u003c\/td\u003e\n\u003ctd data-start=\"2421\" data-end=\"2451\" data-col-size=\"sm\"\u003e40 PSI Start \/ 60 PSI Stop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2452\" data-end=\"2475\"\u003e\n\u003ctd data-start=\"2452\" data-end=\"2464\" data-col-size=\"sm\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd data-start=\"2464\" data-end=\"2475\" data-col-size=\"sm\"\u003eNEMA 4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2476\" data-end=\"2510\"\u003e\n\u003ctd data-start=\"2476\" data-end=\"2493\" data-col-size=\"sm\"\u003eEnclosure Size\u003c\/td\u003e\n\u003ctd data-start=\"2493\" data-end=\"2510\" data-col-size=\"sm\"\u003e10\" x 8\" x 4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2511\" data-end=\"2543\"\u003e\n\u003ctd data-start=\"2511\" data-end=\"2521\" data-col-size=\"sm\"\u003eDisplay\u003c\/td\u003e\n\u003ctd data-start=\"2521\" data-end=\"2543\" data-col-size=\"sm\"\u003eLCD with Bar Graph\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2544\" data-end=\"2595\"\u003e\n\u003ctd data-start=\"2544\" data-end=\"2564\" data-col-size=\"sm\"\u003eControl Interface\u003c\/td\u003e\n\u003ctd data-start=\"2564\" data-end=\"2595\" data-col-size=\"sm\"\u003eRotary Encoder + ESC Button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2596\" data-end=\"2630\"\u003e\n\u003ctd data-start=\"2596\" data-end=\"2611\" data-col-size=\"sm\"\u003eAlarm Output\u003c\/td\u003e\n\u003ctd data-start=\"2611\" data-end=\"2630\" data-col-size=\"sm\"\u003eAuxiliary Relay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2631\" data-end=\"2681\"\u003e\n\u003ctd data-start=\"2631\" data-end=\"2640\" data-col-size=\"sm\"\u003eInputs\u003c\/td\u003e\n\u003ctd data-start=\"2640\" data-end=\"2681\" data-col-size=\"sm\"\u003eOptional float switch or floor sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2682\" data-end=\"2736\"\u003e\n\u003ctd data-start=\"2682\" data-end=\"2699\" data-col-size=\"sm\"\u003eCertifications\u003c\/td\u003e\n\u003ctd data-start=\"2699\" data-end=\"2736\" data-col-size=\"sm\"\u003eUL \/ cUL (typical for SJE panels)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"2737\" data-end=\"2787\"\u003e\n\u003ctd data-start=\"2737\" data-end=\"2748\" data-col-size=\"sm\"\u003eWarranty\u003c\/td\u003e\n\u003ctd data-start=\"2748\" data-end=\"2787\" data-col-size=\"sm\"\u003e5-Year (Panel), 2-Year (Transducer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr data-start=\"2789\" data-end=\"2792\"\u003e\n\u003ch2 data-section-id=\"1406zv8\" data-start=\"2794\" data-end=\"2851\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"2797\" data-end=\"2851\"\u003eWhy This is a Major Upgrade Over Standard Controls\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp data-start=\"2853\" data-end=\"2925\"\u003eMost well systems still rely on mechanical pressure switches, which:\u003c\/p\u003e\n\u003cul data-start=\"2926\" data-end=\"3008\"\u003e\n\u003cli data-section-id=\"8n3ycc\" data-start=\"2926\" data-end=\"2948\"\u003eWear out over time\u003c\/li\u003e\n\u003cli data-section-id=\"1i16k20\" data-start=\"2949\" data-end=\"2977\"\u003eDrift out of calibration\u003c\/li\u003e\n\u003cli data-section-id=\"1p2uu0u\" data-start=\"2978\" data-end=\"3008\"\u003eOffer zero system feedback\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"3010\" data-end=\"3061\"\u003e\u003cstrong\u003eThe WellZone® eliminates those issues by providing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"3062\" data-end=\"3228\"\u003e\n\u003cli data-section-id=\"12tirwm\" data-start=\"3062\" data-end=\"3104\"\u003ePrecision digital pressure control\u003c\/li\u003e\n\u003cli data-section-id=\"to9og9\" data-start=\"3105\" data-end=\"3140\"\u003eReal-time system visibility\u003c\/li\u003e\n\u003cli data-section-id=\"e2i2c1\" data-start=\"3141\" data-end=\"3179\"\u003eBuilt-in pump protection logic\u003c\/li\u003e\n\u003cli data-section-id=\"qgjy9b\" data-start=\"3180\" data-end=\"3228\"\u003eFewer service calls and longer pump life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"3230\" data-end=\"3233\"\u003e\n\u003ch2 data-section-id=\"5cs82e\" data-start=\"3235\" data-end=\"3262\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"3238\" data-end=\"3262\"\u003eTypical Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul data-start=\"3264\" data-end=\"3427\"\u003e\n\u003cli data-section-id=\"10d381q\" data-start=\"3264\" data-end=\"3292\"\u003eResidential well systems\u003c\/li\u003e\n\u003cli data-section-id=\"1ikdnyc\" data-start=\"3293\" data-end=\"3332\"\u003eRural and agricultural water supply\u003c\/li\u003e\n\u003cli data-section-id=\"u4kf9n\" data-start=\"3333\" data-end=\"3370\"\u003eLow-yield well protection systems\u003c\/li\u003e\n\u003cli data-section-id=\"owhmrb\" data-start=\"3371\" data-end=\"3427\"\u003eReplacement for pressure switch + control box setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"3429\" data-end=\"3432\"\u003e\n\u003ch2 data-section-id=\"3l09bs\" data-start=\"3434\" data-end=\"3473\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"3436\" data-end=\"3473\"\u003eFrequently Asked Questions (FAQs)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 data-section-id=\"10jwbi0\" data-start=\"3475\" data-end=\"3521\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"3479\" data-end=\"3519\"\u003eDoes this replace a pressure switch?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"3522\" data-end=\"3638\"\u003eYes. The included pressure transducer replaces the traditional pressure switch, providing more accurate control.\u003c\/p\u003e\n\u003chr data-start=\"3640\" data-end=\"3643\"\u003e\n\u003ch3 data-section-id=\"d1pb1t\" data-start=\"3645\" data-end=\"3698\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"3649\" data-end=\"3696\"\u003eWhat type of pumps is this compatible with?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"3699\" data-end=\"3766\"\u003eIt is designed for single-phase, 3-wire submersible well pumps.\u003c\/p\u003e\n\u003chr data-start=\"3768\" data-end=\"3771\"\u003e\n\u003ch3 data-section-id=\"18q8860\" data-start=\"3773\" data-end=\"3818\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"3777\" data-end=\"3816\"\u003eCan I adjust the pressure settings?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"3819\" data-end=\"3879\"\u003eYes. Both start and stop pressures are fully adjustable.\u003c\/p\u003e\n\u003chr data-start=\"3881\" data-end=\"3884\"\u003e\n\u003ch3 data-section-id=\"17mjsk9\" data-start=\"3886\" data-end=\"3934\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"3890\" data-end=\"3932\"\u003eWhat protection features are included?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"3935\" data-end=\"4038\"\u003eIt includes dry run protection, rapid cycle protection, well recharge timing, and alarm monitoring.\u003c\/p\u003e\n\u003chr data-start=\"4040\" data-end=\"4043\"\u003e\n\u003ch3 data-section-id=\"1k075e2\" data-start=\"4045\" data-end=\"4090\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"4049\" data-end=\"4088\"\u003eDoes it display system information?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"4091\" data-end=\"4163\"\u003eYes. The LCD shows pressure, pump status, amps, runtime, and cycles.\u003c\/p\u003e\n\u003chr data-start=\"4165\" data-end=\"4168\"\u003e\n\u003ch3 data-section-id=\"12jsxwr\" data-start=\"4170\" data-end=\"4222\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"4174\" data-end=\"4220\"\u003eIs this suitable for outdoor installation?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"4223\" data-end=\"4289\"\u003eYes. The NEMA 4X enclosure is built for indoor or outdoor use.\u003c\/p\u003e\n\u003chr data-start=\"4291\" data-end=\"4294\"\u003e\n\u003ch3 data-section-id=\"oyt1nd\" data-start=\"4296\" data-end=\"4344\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"4300\" data-end=\"4342\"\u003eWhat happens during a fault condition?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"4345\" data-end=\"4430\"\u003eThe system will trigger alarms and protect the pump, depending on the fault type.\u003c\/p\u003e\n\u003chr data-start=\"4432\" data-end=\"4435\"\u003e\n\u003ch3 data-section-id=\"1yv8soi\" data-start=\"4437\" data-end=\"4489\"\u003e\u003cspan role=\"text\"\u003e\u003cstrong data-start=\"4441\" data-end=\"4487\"\u003eDoes it include motor starting components?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"4490\" data-end=\"4577\"\u003eYes. It includes capacitors and start relay, making it a complete control solution.\u003c\/p\u003e","brand":"SJE Rhombus","offers":[{"title":"1\/2 HP Panel \/ Single Phase - 3-Wire - 230V AC - 60 Hz","offer_id":53637008163180,"sku":"1094602","price":1283.52,"currency_code":"CAD","in_stock":true},{"title":"3\/4 HP Panel \/ Single Phase - 3-Wire - 230V AC - 60 Hz","offer_id":53637008195948,"sku":"1094603","price":1283.52,"currency_code":"CAD","in_stock":true},{"title":"1 HP Panel \/ Single Phase - 3-Wire - 230V AC - 60 Hz","offer_id":53637008228716,"sku":"1094604","price":1129.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/SJER-3WireWellZone-Inside-withLabels-02-24_1.png?v=1776719878"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/collections\/SJe_rhombus_087f163d-5010-4995-892a-f4577ce7fa0f.jpg?v=1740975563","url":"https:\/\/cleanflow.net\/collections\/sje-rhombus\/float-switches-and-accessories.oembed","provider":"Cleanflow","version":"1.0","type":"link"}