General Pipe Cleaners Root 66 Sectional Cable Machine
Checkout securely with
General Pipe Cleaners Root 66 Sectional Cable Machine can drive 5/8" cables for lines up to 3" and 7/8" cables for 4" lines. You can switch from one to the other in seconds, without touching the jaws, without an adapter, without tools. And for sink drain work, slip on a drum that holds smaller cables.
To operate, just feed a cable into the line and slide the back end into the machine. The excess cable goes into a guide tube. Turn on the sealed motor, press down on the handle, and the Root 66 starts spinning the cable at 400 RPM.
The cable stops rotating as soon as he handle is lifted so there’s no additional torque buildup. When using a drum for small drain work, the drum stops turning when you lift the handle to the neutral position.
The Root 66 has a wide four point base for greater stability. Its interlocking tubular construction also gives it excellent durability. To protect the gears from dirt and for easier cleaning, the machine has two internal plastic shields. A Ground Fault Circuit Interrupter is standard equipment.
This fully featured machine includes six sections of 5/8" x 7-1/2 ft of cable for 3" lines, five sections of 7/8" x 15 ft cable for 4" lines, carriers for 5/8" and 7/8" cable sizes, a steel drum with 25 feet of 5/16" cable for smaller drain work, rear guide hose, cutter sets for each cable size, and a convenient tool box.