{"product_id":"hcp-an-21-5h-high-head-submersible-dewatering-pump-1-5-hp","title":"HCP AN-21.5H High Head Submersible Dewatering Pump: 1.5 HP, 2-inch, 73 ft Head","description":"\u003ch2\u003eHCP AN-21.5H 1.5 HP High-Head Dewatering Pump for Deep Pits\u003c\/h2\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHCP AN-21.5H\u003c\/strong\u003e is a high-head submersible dewatering pump, the high-lift member of HCP's 2-inch AN line. Its 1.5 HP motor moves muddy and silty water up to 73 ft of head at up to 88 GPM, clearing deep excavations, high-rise transfers, and long discharge runs that stall a lower-powered pump.\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower\u003c\/strong\u003e: 1.5 HP (1.1 kW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage \/ Phase\u003c\/strong\u003e: 120V 1-phase (14.4 A), also 240V 3-phase (4.6 A) and 575V 3-phase (1.8 A), 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge\u003c\/strong\u003e: 2 inch (50 mm), Female NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Head\u003c\/strong\u003e: 73 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Flow\u003c\/strong\u003e: 88 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids Handling\u003c\/strong\u003e: 5\/16 inch (8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller\u003c\/strong\u003e: Cast-iron vortex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCord\u003c\/strong\u003e: 30 ft, 3-prong 120V plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features of HCP AN-21.5H High Head Dewatering Pumps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWith 1.5 HP the AN-21.5H reaches about 73 ft of head, roughly seven storeys of lift, so it clears deep excavations and long vertical runs that stall a 1 HP dewatering pump.\u003c\/li\u003e\n\u003cli\u003eAs a high-head submersible dewatering pump, it is built for lift, not extra flow. Like the 1 HP AN-21A, it peaks near 88 GPM, but the added half-horsepower pushes that water far higher.\u003c\/li\u003e\n\u003cli\u003eA cast-iron (FC200) vortex impeller and casing stand up to abrasive, silty, sandy water, where the plastic impeller on the 1 HP AN-21A would wear faster. Solids up to 5\/16 inch (8 mm) pass through the 304 stainless steel bottom strainer.\u003c\/li\u003e\n\u003cli\u003eTwin mechanical seals, carbon\/ceramic over silicon carbide, run in an oil bath to keep grit and water out of the motor. The three-phase models add a built-in auto-cut thermal protector against overload.\u003c\/li\u003e\n\u003cli\u003eThe IP68 sealed motor, with a 304 stainless steel frame and cast-iron body, is rated for continuous submersion to 33 ft (10 m) at 120V, 240V, and 575V.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" style=\"text-align: left;\"\u003eCategory\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"text-align: left;\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eBrand\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eHCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eModel\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eAN-21.5H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eSKU (by voltage)\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eAN-21.5H-6117EPE3NX (120V), AN-21.5H-63AOEXE4NX (240V), AN-21.5H-635OEXE4NX (575V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eSubmersible dewatering pump (high head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMotor Output\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e1.5 HP (1.1 kW output); input 1.55 kW (120V), 1.45 kW (3-phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eVoltage Options\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e120V 1-phase, 240V 3-phase, 575-600V 3-phase, 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eRated Current\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e14.4 A (120V), 4.6 A (240V 3-ph), 1.8 A (575V 3-ph)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eStart Method\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eCapacitor (120V), DOL (3-phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eSpeed\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e3400 rpm (2 pole)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eInsulation Class\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eDischarge\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e2 inch (50 mm), Female NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMax Head\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e73 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMax Flow\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e88 GPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eSolids Handling\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e5\/16 inch (8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eStrainer\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e304 stainless steel (bottom suction)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eImpeller\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eVortex, FC200 cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMechanical Seal\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eDouble (carbon\/ceramic upper, silicon carbide lower), oil-filled (VG32, 230 cc)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eCasing \/ Volute\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eCast iron (FC200)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMotor Frame\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e304 stainless steel (SUS304)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eShaft\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eSUS410 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eBearings\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e6202ZZ, 6303ZZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eCooling\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eExternal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eProtection Devices\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eAuto-cut thermal protector (three-phase per spec sheet); confirm single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eIngress Protection\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMax Submersion Depth\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e33 ft (10 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMax Liquid Temp\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e104F (40C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMax Starts per Hour\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eCord\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eSJOW (120V) \/ SOW (3-phase); 30 ft, 3-prong 120V plug (per HCP AN-series quote)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eWeight\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e42 lb (19 kg) 1-phase; 39 lb (17.5 kg) 3-phase, less cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eCertifications\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003ecUL (UL778), CSA C22.2 No. 108-14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eHCP Pump Manufacturer Co., Ltd.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance Overview\u003c\/h3\u003e\n\u003cp\u003eThe AN-21.5H is a high-head submersible dewatering pump, so it lifts to about 73 ft, well above the 1 HP AN-21A, while both peak near 88 GPM. Flow is highest at low lift and tapers as head rises, so match the pump to the vertical distance you need to clear.\u003c\/p\u003e\n\u003ch3\u003eAN-21.5H vs AN-21A: Do you need the extra head?\u003c\/h3\u003e\n\u003cp\u003eBoth are 2-inch AN dewatering pumps that peak near 88 GPM. The AN-21.5H adds lift and a tougher impeller. Choose based on how high you need to push the water and how abrasive it is.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" style=\"text-align: left;\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"text-align: left;\"\u003eAN-21A (standard)\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"text-align: left;\"\u003eAN-21.5H (high head)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMotor\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e1 HP\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e1.5 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMax flow\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e88 GPM\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e88 GPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eMax head\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eAbout 53 ft\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eAbout 73 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eImpeller\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003ePlastic (PA+G50)\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eCast iron (FC200)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eSolids\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003e1\/4 inch (7 mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003e5\/16 inch (8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eInsulation class\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eB\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align: left;\"\u003eBest for\u003c\/th\u003e\n\u003ctd style=\"text-align: left;\"\u003eStandard pits and discharge runs\u003c\/td\u003e\n\u003ctd style=\"text-align: left;\"\u003eDeep pits, high-rise, long runs, abrasive water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eAs a high-head submersible dewatering pump, the AN-21.5H suits jobs where water has to move up and out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeep excavation and foundation pits that need high lift\u003c\/li\u003e\n\u003cli\u003ePumping water up from basements and sub-levels to grade\u003c\/li\u003e\n\u003cli\u003eHigh-rise and multi-storey construction dewatering\u003c\/li\u003e\n\u003cli\u003eLong-distance or uphill discharge runs\u003c\/li\u003e\n\u003cli\u003eMuddy, silty, and sandy water from sumps, vaults, and cofferdams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRun the 2-inch discharge into a \u003ca href=\"https:\/\/cleanflow.net\/products\/blue-pvc-layflat-discharge-hose-hose-only-no-ends-lightweight-durable-single-wall-ideal-for-irrigation-construction-flood-protection\"\u003e2 inch layflat discharge hose\u003c\/a\u003e to carry water clear of the work area.\u003c\/p\u003e\n\u003ch2\u003eBuy the HCP AN-21.5H High Head Dewatering Pump Online from Cleanflow\u003c\/h2\u003e\n\u003cp\u003eWhen water has to climb out of a deep excavation, a flooded sub-level, or a long uphill run, the \u003cstrong\u003eHCP AN-21.5H submersible dewatering pump\u003c\/strong\u003e delivers up to 73 ft of head on 1.5 HP, with a cast-iron impeller built for silty, abrasive water. \u003cstrong\u003eCleanflow Utility Supply Company\u003c\/strong\u003e is an authorized HCP dealer, stocking and shipping \u003ca href=\"https:\/\/cleanflow.net\/collections\/hcp\"\u003eHCP pumps\u003c\/a\u003e across Canada and the continental USA, with free shipping on orders over $199.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrowse the full \u003c\/strong\u003e\u003ca href=\"https:\/\/cleanflow.net\/collections\/submersible-dewatering-pumps\"\u003e\u003cstrong\u003esubmersible dewatering pumps\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e range to compare flow and head, then add the AN-21.5H to your cart or contact us to size the right pump for your lift.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope=\"\" itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow high can the AN-21.5H lift water?\u003c\/h3\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eAs a high-head submersible dewatering pump, it reaches up to about 73 ft of head, around 31 psi. That lift is what separates the 1.5 HP AN-21.5H from the 1 HP AN-21A, which tops out near 53 ft. Both move up to 88 GPM.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eAN-21A or AN-21.5H, which do I need?\u003c\/h3\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eBoth peak near 88 GPM, so choose by lift and by how abrasive the water is. Use the 1 HP AN-21A for standard pits and runs. Step up to the 1.5 HP AN-21.5H when you need to push water higher, out of a deep excavation, up several floors, or through a long uphill line, or when grit calls for its cast-iron impeller instead of the AN-21A's plastic one.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs the AN-21.5H a sewage pump?\u003c\/h3\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo. It is a dewatering pump. It passes solids up to 5\/16 inch (8 mm) through a bottom strainer, which suits muddy, silty, and sandy water, not raw sewage. For sewage with 2-inch solids, use a sewage ejector such as the HCP FN-21UL.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the impeller made of?\u003c\/h3\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eCast iron (FC200). The 1 HP AN-21A uses a plastic (PA+G50) impeller, so the AN-21.5H is the more durable of the two in abrasive, gritty water, which is common in construction dewatering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs the AN-21.5H certified, and what voltages does it come in?\u003c\/h3\u003e\n\u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eIt carries CSA C22.2 No. 108-14 and cUL (UL778), with an IP68-sealed motor. It comes in 120V single-phase (14.4 A), 240V three-phase (4.6 A), and 575V three-phase (1.8 A).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HCP","offers":[{"title":"120 Volt - 1 Phase","offer_id":54081805123948,"sku":"AN-21.5H-611LEXG3NX","price":1328.61,"currency_code":"CAD","in_stock":true},{"title":"208\/240 Volt -3 Phase","offer_id":54081805156716,"sku":"AN-21.5H-63AOEXE4NX","price":1554.17,"currency_code":"CAD","in_stock":true},{"title":"575 Volt - 3 Phase","offer_id":54081805189484,"sku":"AN-21.5H-635OEXE4NX","price":1554.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/HCP_AN-21.5H_High_Head_Submersible_Dewatering_Pump.webp?v=1786618006","url":"https:\/\/cleanflow.net\/products\/hcp-an-21-5h-high-head-submersible-dewatering-pump-1-5-hp","provider":"Cleanflow","version":"1.0","type":"link"}