{"product_id":"hcp-fn-21ul","title":"HCP FN-21UL Sewage Ejector Pump: 1 HP, 2-inch Discharge, 2-inch Solids, 100 GPM","description":"\u003ch2\u003eHCP FN-21UL Sewage Ejector Pump for Raw Sewage and 2-Inch Solids\u003c\/h2\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHCP FN-21UL submersible sewage ejector pump\u003c\/strong\u003e moves raw residential and light-commercial sewage from a below-grade basin up to a gravity main, septic tank, or treatment system. Its 1 HP motor passes solids up to 2 inches (50 mm) and delivers up to 100 GPM (about 6,000 GPH), with 120V, 240V, and 575V models available.\u003c\/p\u003e\n\u003ch3\u003eQuick Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower\u003c\/strong\u003e: 1 HP (0.75 kW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage \/ Phase\u003c\/strong\u003e: 120V 1-phase (10.4 A), also 208\/240V 3-phase (3.8 A) and 575V 3-phase (1.5 A), 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge\u003c\/strong\u003e: 2 inch (50 mm), Female NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids Handling\u003c\/strong\u003e: 2 inch (50 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Flow\u003c\/strong\u003e: 100 GPM (about 6,000 GPH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Head\u003c\/strong\u003e: 36 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller\u003c\/strong\u003e: Non-clog vortex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCord\u003c\/strong\u003e: 30 ft, 3-prong 120V plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features of HCP FN-21UL Sewage Ejector Pumps\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe non-clog vortex impeller passes solids up to 2 inches (50 mm), the full residential sewage-ejector rating, so it clears raw sewage that a smaller effluent pump would jam on.\u003c\/li\u003e\n\u003cli\u003eAt 1 HP, it delivers more head than the 1\/2 HP ejectors common in homes, lifting to about 36 ft for deeper basins and longer runs up to the main, while still moving up to 100 GPM (about 6,000 GPH).\u003c\/li\u003e\n\u003cli\u003eAn open inlet with no strainer feeds solids straight into the volute. As an ejector rather than a grinder, it passes waste whole instead of macerating it.\u003c\/li\u003e\n\u003cli\u003eTwin mechanical seals, carbon\/ceramic over silicon carbide, run in an oil bath to keep sewage out of the motor. The 120V model adds an auto-cut thermal protector and a moisture sensor.\u003c\/li\u003e\n\u003cli\u003eA cast-iron (FC200) casing and 304 stainless steel motor frame, IP68 sealed, are rated for permanent submersion in a sewage basin to 33 ft (10 m).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eFN-21UL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU (by voltage)\u003c\/td\u003e\n\u003ctd\u003eFN-21UL-6117EPE3NX (120V), FN-21UL-63AOEXE4NX (240V), FN-21UL-635OEXE4NX (575V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSubmersible sewage ejector pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Output\u003c\/td\u003e\n\u003ctd\u003e1 HP (0.75 kW); input 1.1 kW (120V), 1.05 kW (3-phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Options\u003c\/td\u003e\n\u003ctd\u003e120V 1-phase, 208\/240V 3-phase, 575V 3-phase, 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Current\u003c\/td\u003e\n\u003ctd\u003e10.4 A (120V), 3.8 A (240V 3-ph), 1.5 A (575V 3-ph)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStart Method\u003c\/td\u003e\n\u003ctd\u003eCapacitor (120V), DOL (3-phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed\u003c\/td\u003e\n\u003ctd\u003e3400 rpm (2 pole)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation Class\u003c\/td\u003e\n\u003ctd\u003eB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDischarge\u003c\/td\u003e\n\u003ctd\u003e2 inch (50 mm), Female NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolids Handling\u003c\/td\u003e\n\u003ctd\u003e2 inch (50 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Flow\u003c\/td\u003e\n\u003ctd\u003e100 GPM (about 6,000 GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Head\u003c\/td\u003e\n\u003ctd\u003e36 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet\u003c\/td\u003e\n\u003ctd\u003eOpen (no strainer), passes solids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpeller\u003c\/td\u003e\n\u003ctd\u003eNon-clog vortex, PA+G50 (glass reinforced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical Seal\u003c\/td\u003e\n\u003ctd\u003eDouble (carbon\/ceramic upper, silicon carbide lower), oil-filled (VG32, 190 cc)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCasing \/ Volute\u003c\/td\u003e\n\u003ctd\u003eCast iron (FC200)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Frame\u003c\/td\u003e\n\u003ctd\u003e304 stainless steel (SUS304)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft\u003c\/td\u003e\n\u003ctd\u003eSUS410 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eExternal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Devices\u003c\/td\u003e\n\u003ctd\u003eAuto-cut thermal protector and moisture sensor (120V 1-phase); external overload for 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngress Protection\u003c\/td\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Submersion Depth\u003c\/td\u003e\n\u003ctd\u003e33 ft (10 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Liquid Temp\u003c\/td\u003e\n\u003ctd\u003e104F (40C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Starts per Hour\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord\u003c\/td\u003e\n\u003ctd\u003e30 ft, SJOW (120V) \/ SOW (3-phase), 3-prong 120V plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e36 lb (16.5 kg) 1-phase; 34 lb (15.5 kg) 3-phase, less cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003ecUL (UL778), CSA C22.2 No. 108-14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eHCP Pump Manufacturer Co., Ltd.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance Overview\u003c\/h3\u003e\n\u003cp\u003eThe FN-21UL submersible sewage ejector pump moves up to 100 GPM and lifts to about 36 ft. Flow is highest at low lift and tapers as head rises, so size it to the vertical rise from your basin to the main.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/HCP_FN-21UL.png?v=1785043114\" alt=\"HCP FN-21UL\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFN-21U vs FN-21UL: effluent or sewage?\u003c\/h3\u003e\n\u003cp\u003eBoth are 1 HP FN-series pumps, but they handle different waste. Match the pump to the solids.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eFN-21U (effluent)\u003c\/th\u003e\n\u003cth\u003eFN-21UL (sewage)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolids\u003c\/td\u003e\n\u003ctd\u003e1-3\/8 inch\u003c\/td\u003e\n\u003ctd\u003e2 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandles\u003c\/td\u003e\n\u003ctd\u003eSeptic effluent, low-pressure sewer\u003c\/td\u003e\n\u003ctd\u003eRaw sewage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax flow\u003c\/td\u003e\n\u003ctd\u003e88 GPM\u003c\/td\u003e\n\u003ctd\u003e100 GPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax head\u003c\/td\u003e\n\u003ctd\u003e47 ft\u003c\/td\u003e\n\u003ctd\u003e36 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eLonger or higher effluent runs\u003c\/td\u003e\n\u003ctd\u003eSewage basins with 2-inch solids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBasement bathroom and below-grade sewage basins\u003c\/li\u003e\n\u003cli\u003eRaw sewage is transferred to a gravity main or septic tank\u003c\/li\u003e\n\u003cli\u003eSimplex sewage ejector packages in homes and small commercial buildings\u003c\/li\u003e\n\u003cli\u003eLift stations for buildings below the sewer line\u003c\/li\u003e\n\u003cli\u003eSewage transfer from guest houses, shops, and outbuildings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuild it into a basin with a check valve and control panel from the \u003ca href=\"https:\/\/cleanflow.net\/collections\/sewage-pump-accessories\"\u003esewage pump accessories\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch3\u003eBuy the HCP FN-21UL Sewage Ejector Pump Online from Cleanflow\u003c\/h3\u003e\n\u003cp\u003eFor raw sewage that has to move from a below-grade basin up to the main, the \u003cstrong\u003eHCP FN-21UL submersible sewage ejector pump\u003c\/strong\u003e passes 2-inch solids and moves up to 100 GPM on 1 HP. \u003cstrong\u003eCleanflow Utility Supply Company\u003c\/strong\u003e is an authorized HCP dealer, stocking and shipping \u003ca href=\"https:\/\/cleanflow.net\/collections\/hcp\"\u003eHCP pumps\u003c\/a\u003e across Canada and the continental USA, with free shipping on orders over $199.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrowse the full \u003ca href=\"https:\/\/cleanflow.net\/collections\/hcp-sewage-pumps\"\u003esewage pumps\u003c\/a\u003e range, then add the FN-21UL to your cart or contact us to size the right pump for your basin.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/FAQPage\" itemscope=\"\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDoes the HCP FN-21UL replace the F-21UL?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. The FN-21UL is HCP's replacement for the discontinued F-21UL, keeping the 1 HP, 2-inch, 2-inch-solids sewage-ejector format with an updated FN-series motor. It comes in 120V, 240V, and 575V, so an F-21UL swaps out without changing the discharge.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWhat size solids does the FN-21UL pass?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eUp to 2 inches (50 mm), the standard for a residential sewage ejector, through a non-clog vortex impeller. That covers raw sewage and the solids that a toilet passes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eFN-21U or FN-21UL, which do I need?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eMatch it to your waste. The FN-21U is an effluent pump (1-3\/8 inch solids) for septic effluent and low-pressure sewer. The FN-21UL is a sewage ejector (2-inch solids) for raw sewage from a basin up to the main. If a toilet drains into the basin, use the FN-21UL.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs the FN-21UL a grinder pump?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eNo. The FN-21UL submersible sewage ejector pump passes 2-inch solids whole rather than grinding them, and it needs a 2-inch or larger discharge line. To pump through a small-diameter pressure line, a grinder pump is the right tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003ch4 itemprop=\"name\"\u003eIs the FN-21UL certified, and does it have motor protection?\u003c\/h4\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e\n\u003cdiv itemprop=\"text\"\u003e\n\u003cp\u003eYes. It carries CSA C22.2 No. 108-14 and cUL (UL778), with an IP68-sealed motor. The 120V model includes an auto-cut thermal protector and a moisture sensor; the three-phase models use external overload protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HCP","offers":[{"title":"120 Volt - 1 Phase","offer_id":54081764229484,"sku":"FN-21UL-6117EPE3NX","price":1170.41,"currency_code":"CAD","in_stock":true},{"title":"208\/240 Volt - 3 Phase","offer_id":54081764262252,"sku":"FN-21UL-632OEX","price":1324.22,"currency_code":"CAD","in_stock":true},{"title":"575 Volt - 3 Phase","offer_id":54081764295020,"sku":"FN-21UL-635OEXE4NX","price":1307.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/HCP_FN-21UL_Sewage_Ejector_Pump.jpg?v=1785043298","url":"https:\/\/cleanflow.net\/products\/hcp-fn-21ul","provider":"Cleanflow","version":"1.0","type":"link"}