{"product_id":"holemaster-pilot-clamp-saw-kit-99250","title":"Holemaster Pilot Clamp Hole Saw Kit with 6 Bi-Metal Hole Saws (1\" to 2\")","description":"\u003ch2\u003ePilot Clamp Kit with Patented Quick-Change Hole Saw Guides for Pipe Up to 4\"\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHolemaster pilot clamp hole saw kit\u003c\/strong\u003e clamps onto pipe up to 4 inches in diameter and holds the hole saw straight against the surface, so every hole comes out clean and round. Four built-in bubble levels confirm alignment before each cut, and patented quick-change guides snap in and out for six hole sizes from 1\" to 2\" without tools. The clamp locks on with vise-grip handles, leaving both hands free to run the drill. No drill press needed. Works with any standard, cordless, or right-angle drill. Kit weight is 12.2 lbs.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included in This Pilot Clamp Hole Saw Kit\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 Holemaster pilot clamp with guide head and four leveling vials\u003c\/li\u003e\n  \u003cli\u003e6 bi-metal hole saws with interchangeable hole saw guides: 1\", 1-3\/16\", 1-1\/4\", 1-1\/2\", 1-3\/4\", 2\"\u003c\/li\u003e\n  \u003cli\u003e2 arbors\u003c\/li\u003e\n  \u003cli\u003e2 pilot bits\u003c\/li\u003e\n  \u003cli\u003e2 replacement leveling vials\u003c\/li\u003e\n  \u003cli\u003e1 heavy-duty carrying case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePatented quick-change hole saw guides.\u003c\/strong\u003e Each guide snaps in and out of the clamp head without tools, so switching between hole sizes takes seconds on the job site.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFour built-in leveling vials.\u003c\/strong\u003e Two vials on each axis confirm the drill is square to the pipe before cutting, whether the pipe runs horizontal, vertical, or at an angle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLocking vise-grip handles.\u003c\/strong\u003e The jaw clamps onto pipe from the outside and locks in place, leaving both hands free to operate the drill.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSix hole sizes from 1\" to 2\".\u003c\/strong\u003e Covers the most common branch connection sizes for mechanical tees, weld-o-lets, and threaded outlets in pipe up to 4 inches.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpare consumables included.\u003c\/strong\u003e Two extra pilot bits and two replacement leveling vials ship with the kit, so worn parts don't shut down the job.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks with any drill.\u003c\/strong\u003e Standard corded, cordless, or right-angle drills all fit the hole saw guide head. No proprietary spindle or adapter required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Holemaster hole drilling tool ships ready to use out of the box, from the hole saws and arbors to the spare pilot bits and carrying case.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003cth\u003eSpecification\u003c\/th\u003e\n    \u003cth\u003eDetail\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003ePart Number\u003c\/td\u003e\n    \u003ctd\u003e99250\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMaximum Hole Size\u003c\/td\u003e\n    \u003ctd\u003e2\"\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eMaximum Pipe Diameter\u003c\/td\u003e\n    \u003ctd\u003e4\"\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eIncluded Hole Saw Sizes\u003c\/td\u003e\n    \u003ctd\u003e1\", 1-3\/16\", 1-1\/4\", 1-1\/2\", 1-3\/4\", 2\"\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eNumber of Hole Saws\u003c\/td\u003e\n    \u003ctd\u003e6 bi-metal with interchangeable guides\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eArbors\u003c\/td\u003e\n    \u003ctd\u003e2 included\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003ePilot Bits\u003c\/td\u003e\n    \u003ctd\u003e2 included (plus 2 replacements)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eLeveling Vials\u003c\/td\u003e\n    \u003ctd\u003e4 built-in (plus 2 replacements)\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHole Saw Guide Patent\u003c\/td\u003e\n    \u003ctd\u003eUS Patent D947,639\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eKit Weight\u003c\/td\u003e\n    \u003ctd\u003e12.2 lbs\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eCarrying Case\u003c\/td\u003e\n    \u003ctd\u003eIncluded\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eDrill Compatibility\u003c\/td\u003e\n    \u003ctd\u003eStandard corded, cordless, or right-angle drills\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003ePipe Materials\u003c\/td\u003e\n    \u003ctd\u003eSteel, stainless steel, copper\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDrilling holes in fire sprinkler pipe for mechanical tees and branch connections\u003c\/li\u003e\n  \u003cli\u003eWaterflow detector and tamper switch installations on wet and dry sprinkler systems\u003c\/li\u003e\n  \u003cli\u003eWeld-o-let and threaded outlet connections on steel piping\u003c\/li\u003e\n  \u003cli\u003eHVAC hydronic piping for chilled water and heating branch lines\u003c\/li\u003e\n  \u003cli\u003eMunicipal water line tapping and service connections\u003c\/li\u003e\n  \u003cli\u003ePlumbing rough-in on copper and steel drain, waste, and vent systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Holemaster pilot clamp is standard equipment among fire sprinkler tools and sees regular use wherever pipefitters need to cut accurate branch connection holes. Learning how to use a pilot clamp takes minutes: lock the jaw, level the head, and drill. As a pipe hole cutter, it handles the same range of work as competing kits at a lower entry cost.\u003c\/p\u003e\n\u003cp\u003eContractors comparing the best pilot clamp for fire sprinkler pipe should weigh hole range, kit contents, and total price per kit.\u003c\/p\u003e\n\n\u003ch2\u003eBuy Your Pilot Clamp Hole Saw Kit Online from Cleanflow\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCleanflow Utility Supply Company\u003c\/strong\u003e is an authorized supplier of\u003ca href=\"https:\/\/cleanflow.net\/collections\/pipe-tools\"\u003e pipe tools\u003c\/a\u003e and fire sprinkler tools serving customers across Canada and the United States. Free shipping on orders over $199, with a 30-day return policy.\u003c\/p\u003e\n\u003cp\u003eBrowse our full selection of\u003ca href=\"https:\/\/cleanflow.net\/collections\/general-pipe-working-tools\"\u003e general pipe working tools\u003c\/a\u003e and\u003ca href=\"https:\/\/cleanflow.net\/collections\/lyncar\"\u003e Lyncar products\u003c\/a\u003e, or email \u003ca href=\"mailto:info@cleanflow.ca\"\u003einfo@cleanflow.ca\u003c\/a\u003e for questions about the Holemaster pilot clamp kit or any pipe hole cutter in our catalog.\u003c\/p\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat is a pilot clamp?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003eA pilot clamp is a locking hole saw guide that clamps onto pipe and holds the drill straight for clean, round holes. It replaces freehand drilling, which typically produces oval or angled cuts that cause leaky branch connections on mechanical tees and weld-o-lets.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eHow do you use a pilot clamp to drill a hole in pipe?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003eLock the vise-grip jaw onto the pipe, snap in the correct hole saw guide for your connection size, check all four bubble levels, and drill straight through. The guide holds the hole saw square to the pipe surface through the entire cut.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eCan a pilot clamp replace a drill press for pipe work?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003eOn the job site, yes. In any pilot clamp vs. drill press comparison, the clamp wins wherever pipe is already installed. A drill press handles loose pipe in a shop but cannot reach overhead runs, tight mechanical rooms, or vertical risers.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat size holes can a pilot clamp drill?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003eThis pilot clamp hole saw kit cuts holes from 1\" to 2\" in pipe up to 4\" in diameter. Those sizes cover most mechanical tee, weld-o-let, and threaded outlet connections in fire sprinkler and plumbing work.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat makes the Holemaster pilot clamp different from other pilot clamps?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003ePatented quick-change hole saw guides snap in and out without tools, four leveling vials (instead of the typical two) keep the drill straight from every angle, and spare pilot bits and replacement vials ship with the kit. This Holemaster hole drilling tool weighs 12.2 lbs complete.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"MAXPOWER","offers":[{"title":"Default Title","offer_id":67645048488300,"sku":"99250","price":1559.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/Holemaster_Pilot_Clamp_Hole_Saw_Kit.webp?v=1791529034","url":"https:\/\/cleanflow.net\/products\/holemaster-pilot-clamp-saw-kit-99250","provider":"Cleanflow","version":"1.0","type":"link"}