{"product_id":"reed-manhole-cover-hook-mh26-mh30-mh36","title":"Reed Manhole Cover Hook MH26, MH30 \u0026 MH36 | Heavy-Duty Forged Carbon Steel Tool for Easy Lifting, 26 to 36 in.","description":"\u003ch2\u003eForged Steel Manhole Cover Lifting Tool in 26, 30 and 36 Inch Lengths\u003c\/h2\u003e\n\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\n\u003cp\u003eCast iron manhole covers weigh 85 to 300 pounds. Prying them open with a screwdriver or pry bar bends the tool and damages the rim. The \u003cstrong\u003eReed manhole cover hook\u003c\/strong\u003e is a forged high-carbon steel manhole hook that slips into standard pickholes and lifts covers with controlled leverage. It comes in three lengths: the 26-inch MH26 at 3.3 lbs, the 30-inch MH30 with a 90-degree rocker head, and the 36-inch MH36 for maximum reach. Choose the length from the size menu above.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eForged 5\/8-inch hex high-carbon steel\u003c\/strong\u003e with grain alignment that resists bending under heavy prying loads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePowder-coated finish\u003c\/strong\u003e bonds to the steel and outlasts painted finishes in wet and outdoor conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1\/2-inch wide hook point\u003c\/strong\u003e fits standard manhole cover pickholes and rim notches without binding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSame-plane handle and hook on the MH26 and MH36\u003c\/strong\u003e let the carbon steel manhole hook lay completely flat for truck or toolbox storage. The MH30's 90-degree rocker head offsets the hook for a different prying angle on stuck or corroded covers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree lengths, 26 to 36 inches at 3.3 to 4.3 lbs\u003c\/strong\u003e, so crews can match hook length to the heaviest cover on their route.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle fits large hands\u003c\/strong\u003e with room for work gloves.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e by Reed Manufacturing (Erie, PA), building pipe tools and utility equipment since 1896.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to Use a Reed Manhole Hook\u003c\/h3\u003e\n\n\u003cp\u003eEvery Reed manhole hook follows a simple insert-and-pry technique. Insert the 1\/2-inch hook point into the pickhole or notch cast into the cover's rim. Raise the handle end to slip the hook under the cover edge. Once the hook catches, lift one side of the cover far enough to create a gap, then slide the cover sideways off the frame.\u003c\/p\u003e\n\n\u003cp\u003eFor covers without a pickhole, wedge the hook point under the rim gap between cover and frame. The same-plane MH26 and MH36 give a low approach angle that works well for this technique. The MH30's rocker head changes the prying angle for covers that have settled or corroded into the frame. Keep your back straight and lift with your legs.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cstrong\u003eMH26\u003c\/strong\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cstrong\u003eMH30\u003c\/strong\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cstrong\u003eMH36\u003c\/strong\u003e\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eItem Code\u003c\/td\u003e\n      \u003ctd\u003e02301\u003c\/td\u003e\n      \u003ctd\u003e02302\u003c\/td\u003e\n      \u003ctd\u003e02303\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLength\u003c\/td\u003e\n      \u003ctd\u003e26 in. (650 mm)\u003c\/td\u003e\n      \u003ctd\u003e30 in. (760 mm)\u003c\/td\u003e\n      \u003ctd\u003e36 in. (900 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e3.3 lbs (1.5 kg)\u003c\/td\u003e\n      \u003ctd\u003e4.0 lbs (1.8 kg)\u003c\/td\u003e\n      \u003ctd\u003e4.3 lbs (2.0 kg)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHandle to Hook\u003c\/td\u003e\n      \u003ctd\u003eSame plane (hook and handle in line)\u003c\/td\u003e\n      \u003ctd\u003e90-degree rocker head\u003c\/td\u003e\n      \u003ctd\u003eSame plane (hook and handle in line)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003eForged 5\/8 in. hex high carbon steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHook Point Width\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003e1\/2 in.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003ePowder coated\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003eReed Manufacturing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003eUSA (Reed Manufacturing, Erie, PA)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eChoose Your Reed Manhole Hook Size\u003c\/h3\u003e\n\n\u003cp\u003eThere are three Reed manhole hook models in the MH series. Each carbon steel manhole hook is forged from 5\/8-inch hex stock with a powder-coated finish, made in the USA. All three are available on this page.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMH26 (02301)\u003c\/td\u003e\n      \u003ctd\u003e26 in. (650 mm), 3.3 lbs (1.5 kg). Same-plane handle and hook. Lightest and most compact for standard covers and tight truck storage.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMH30 (02302)\u003c\/td\u003e\n      \u003ctd\u003e30 in. (760 mm), 4.0 lbs (1.8 kg). 90-degree rocker head offsets the hook for a different prying angle on stuck or corroded covers.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMH36 (02303)\u003c\/td\u003e\n      \u003ctd\u003e36 in. (900 mm), 4.3 lbs (2.0 kg). Same-plane handle and hook. Longest reach for maximum leverage or taller operators.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cp\u003eThe Reed manhole cover hook handles any flush-mounted access cover with a pickhole or rim notch. Municipal water and sewer crews rely on this heavy-duty manhole cover hook across road, sidewalk, and utility right-of-way locations. It is also a manhole cover lifting tool for industrial and facility maintenance settings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCast iron manhole covers\u003c\/strong\u003e in streets, intersections, and utility corridors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStormwater catch basin lids\u003c\/strong\u003e and drainage grate covers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValve box covers\u003c\/strong\u003e for water mains, gas lines, and irrigation systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeptic tank access lids\u003c\/strong\u003e and sewer cleanout covers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUtility vault covers\u003c\/strong\u003e for electrical, telecom, and fiber access points.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFloor drains and trench drain grates\u003c\/strong\u003e in warehouses, treatment plants, and commercial buildings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuy Reed Manhole Cover Hooks Online from Cleanflow\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eCleanflow Utility Supply Company\u003c\/strong\u003e is an authorized Reed Manufacturing supplier. The \u003cstrong\u003eReed manhole cover hook\u003c\/strong\u003e in all three lengths ships across Canada and the USA. Free shipping on orders over $199. For returns or warranty questions, email \u003cstrong\u003einfo@cleanflow.ca\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eBrowse the \u003ca href=\"https:\/\/cleanflow.net\/collections\/reed-manhole-parts\"\u003e\u003cstrong\u003eReed Manhole Parts\u003c\/strong\u003e\u003c\/a\u003e collection for the full lineup of Reed manhole tools.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdiv itemscope=\"\" itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n  \u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat size manhole cover hook do I need?\u003c\/h3\u003e\n    \u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003eMatch hook length to cover weight. Standard residential and sidewalk covers (85-150 lbs) lift with the 26-inch MH26. Heavier commercial covers or lids sealed by road work need the 30-inch MH30 or 36-inch MH36 for more leverage. Start with the MH26 if most of your route is standard covers.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eHow to open a manhole cover with a hook?\u003c\/h3\u003e\n    \u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003eSlide the hook point into the pickhole, raise the handle to catch under the rim, lift one side, and push the cover sideways off the frame. Covers over 200 lbs are safer with two hooks on opposite sides and two people lifting. Keep your back straight and lift with your legs.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat is the difference between the Reed MH26 vs MH30 vs MH36?\u003c\/h3\u003e\n    \u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003eAll three use the same 5\/8-inch hex high-carbon steel. The MH26 (3.3 lbs) is the most compact for standard covers. The MH30 changes the prying angle for stuck lids. The MH36 gives maximum leverage for heavy commercial covers. Most crews start with the MH26 and add sizes as needed.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat is the best manhole cover hook for utility crews?\u003c\/h3\u003e\n    \u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003eThe Reed MH26 handles most standard-weight cast iron covers and stores flat on a service truck. Crews covering large areas benefit from carrying two sizes so the right hook is always on the truck. Match hook length to the heaviest cover on your regular route.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope=\"\" itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n    \u003ch3 itemprop=\"name\"\u003eWhat is the difference between manhole hook handle styles?\u003c\/h3\u003e\n    \u003cdiv itemscope=\"\" itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n      \u003cdiv itemprop=\"text\"\u003e\n        \u003cp\u003eSame-plane hooks (MH26 and MH36) lay flat for storage and pull straight up over the cover. The MH30's offset head changes the prying angle for covers that have settled or corroded into the frame. Same-plane suits routine access. The offset head saves effort on problem lids.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Reed","offers":[{"title":"36\"","offer_id":68126091805036,"sku":"02303","price":72.89,"currency_code":"CAD","in_stock":true},{"title":"30\"","offer_id":68126091837804,"sku":"02302","price":86.83,"currency_code":"CAD","in_stock":true},{"title":"26\"","offer_id":68126091870572,"sku":"02301","price":56.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/5405\/files\/1008839.jpg?v=1730524667","url":"https:\/\/cleanflow.net\/products\/reed-manhole-cover-hook-mh26-mh30-mh36","provider":"Cleanflow","version":"1.0","type":"link"}