Bernzomatic - Soldering Torches

Introduction to Bernzomatic Soldering Torches

Bernzomatic specializes in handheld torches and accessories, known for its durable, high-performance tools powered by fuels like propane, butane, and MAPP gas. They offer solutions for a wide range of applications, including soldering, brazing, welding, and heat-shrinking. Its products combine precision, safety, and reliability, empowering users to handle tasks with efficiency and confidence, whether they’re working on intricate electrical repairs or heavy-duty metalwork.

Why Choose Bernzomatic - Soldering Torches?

Bernzomatic soldering torches are designed with advanced features like instant ignition, adjustable flame control, and durable construction. They deliver consistent performance for a variety of applications—from plumbing and metalwork to crafts and repairs. With a trusted reputation and wide availability of fuel and accessories, Bernzomatic ensures efficient, safe, and effective soldering every time. Explore their available soldering torches at our Canadian warehouse below:

Bernzomatic TS4000T High Heat Torch for Fast Work Times

The Bernzomatic TS4000T High Heat Torch for Fast Work Times is a durable, cast aluminum tool ideal for large-diameter soldering, brazing, and heat treating. It features an efficient swirl flame for maximum heat output and reduced soldering time, with a pressure-regulated design for consistent performance in any position. Convenient controls include an auto start/stop ignition and run-lock button for continuous use. Compatible with MAP-Pro and propane fuels, it comes with a limited lifetime warranty.

Bernzomatic UL2317 Manual Torch for General Applications

The Bernzomatic UL2317 Manual Torch for General Applications is a durable, brass-constructed tool ideal for small diameter soldering, thawing frozen locks and pipes, and other basic heat tasks. It features a 1/2-inch pencil flame, an adjustable flame control valve for precise use and easy shut-off, and requires manual ignition with a separately sold spark lighter. Designed for use with standard 14.1 oz. propane cylinders, it comes with a limited 3-year warranty.

FAQs

1. What is the difference between a soldering torch and a soldering iron, and when should I use a torch instead?

A soldering torch differs from a soldering iron in that it uses an open flame fueled by gas (like propane or butane), reaching much higher temperatures than an electric iron. You should use a soldering torch when working on heavy-duty tasks such as plumbing, jewelry making, or large metal joints where higher heat is needed to melt solder quickly and evenly, especially on thicker metals that an iron can't penetrate effectively.

2. Can I use a soldering torch indoors safely, and what precautions should I take?

Yes, you can use a soldering torch indoors, but it requires proper ventilation and strict safety measures. Always work in a well-ventilated area away from flammable materials, keep a fire extinguisher nearby, use heat-resistant surfaces, and wear safety gear like gloves and goggles. It's also important to double-check that gas connections are secure to prevent leaks and never leave the torch unattended while it's lit.

3. Why won't my solder stick to the metal even though I'm using a torch?

If solder isn’t sticking, the most common causes are oxidation, contamination, or insufficient heat. Make sure the metal is thoroughly cleaned with a wire brush or abrasive pad before applying flux, a chemical that helps remove oxidation and improves solder flow. Also, ensure you're heating the joint adequately; the metal, not just the solder, must reach the proper temperature for bonding to occur.

4. How do I properly ignite and shut off a soldering torch?

To ignite a soldering torch, open the gas valve slightly and use a spark igniter or built-in piezo starter—never use a lighter or match. Adjust the flame to a blue, steady tip for efficient heat. To shut it off, first close the gas valve on the torch head, then the one on the tank (if separate), and wait until the flame is fully extinguished. Always store the torch safely after cooling down completely.

5. Why does my soldering torch make a hissing or sputtering sound?

A hissing sound is usually normal and indicates gas flow, but loud sputtering could mean a blockage, fuel issue, or improper gas pressure. Make sure the torch tip is clean, the gas cylinder is upright, and connections are tight. If the flame is erratic, check for dirt or moisture in the nozzle and consider purging the line. Always consult the user manual for safe troubleshooting.