Flotec Well, Sump and Sewage Pumps

Flotec Well Pumps, Sump Pumps and Water Handling Equipment

Cleanflow is an authorized Flotec distributor, stocking Flotec sump pumps, sewage ejectors, effluent pumps, submersible well pumps, shallow well jet pumps, a jet pump and pressure tank system, multistage booster pumps, and utility dewatering pumps, for residential, commercial, and light industrial water handling across Canada and the United States.

Whether you need a Flotec pump for basement flood protection, a Flotec well pump for well water supply, or a replacement booster pump for inconsistent household pressure, every Flotec product below ships from our Winnipeg warehouse with free shipping on orders over $199.

✔ Authorized Flotec distributor, full Pentair manufacturer warranty
✔ Flotec well, sump, sewage, effluent, booster and utility pumps in stock
✔ Ships from our Winnipeg warehouse, free shipping on orders over $199

About Flotec Pumps

Flotec is a Pentair brand of water handling equipment, producing pumps used in homes, job sites, and commercial facilities. Flotec pump systems are engineered for long service life, efficient operation, and dependable performance in demanding conditions.

From basement drainage to sewage handling and water pressure boosting, Flotec pumps are designed to solve real-world water movement challenges with proven reliability.

Flotec Well Pumps

Flotec well pumps at Cleanflow cover deep and shallow wells. The FP3212 (1/2 HP), FP3222 (3/4 HP), FP3232 (1 HP), and FP3242 (1.5 HP) are 4-inch stainless steel submersibles in Pentair's 10 GPM series, 230 V three-wire, control box included. Pentair rates them for pumping levels of 20 to 150, 20 to 200, 60 to 300, and 100 to 400 ft. At 25 ft or less, the FP4105 cast iron shallow well jet pump delivers 5.6 GPM; the FP410515H adds a 15-gallon-equivalent pre-charged tank; and the dual-voltage FP4155, FP4157, and FP4150 run from 8.5 to 21 GPM, all with a factory-installed 30/50 pressure switch.

See the Flotec well pump collection.

Flotec Sump Pumps

Flotec sump pumps start with the E50VLT, 1/2 HP cast iron, 80 GPM, vertical float switch, and step up to the E75VLT at 3/4 HP and 88 GPM. The FPSS5700A is the 3/4 HP stainless steel option at 5,500 GPH, and the FPZS50RP Easy Sump kit arrives pre-assembled with riser and check valve, moving 3,000 GPH at a 10-foot lift.

See the Flotec sump pump collection.

Flotec Sewage and Effluent Pumps

For basement bathrooms and ejector pits, the FPSE3601A (1/2 HP, cast iron) and FPSES2700A (3/4 HP, stainless steel) pass 2-inch solids; the E75STVT moves 170 GPM. For septic effluent, the E3375TLT (1/3 HP, 3/4-inch solids) and E5005TLT (1/2 HP, 1/2-inch solids) run on tethered float switches.

See the Flotec sewage pump and Flotec effluent pump collections.

Flotec Pressure Tank Systems

Flotec pressure tank systems deliver consistent household water pressure, protect pumps from short-cycling damage, and extend the service life of well pump motors by reducing the number of start/stop cycles. Pressure tanks store water under pressure between pump cycles. When a faucet opens, the tank delivers water until pressure drops to the cut-in setpoint, and the pump restarts and refills the tank.

Cleanflow stocks the FP410515H 1/2 HP Shallow Well Jet Pump/Tank System, a cast iron unit with a pre-mounted 15-gallon-equivalent pre-charged diaphragm tank and 30/50 pressure switch, ready to install. For larger drawdown needs, the FP4105 and the FP4155, FP4157 and FP4150 pair with a separate pre-charged pressure tank sized to the pump's flow rate (see the sizing guidance below).

How to size a Flotec pressure tank

Sizing comes down to three factors: pump flow rate, pressure switch setting, and household demand. The industry-standard rule of thumb:

Tank capacity and drawdown are different figures. A Flotec FP7120 is marketed as an 82-gallon-equivalency tank, but its actual water storage is 35 gallons. Drawdown, the usable water delivered between pump cycles, is 12.7 gallons at a 20/40 PSI switch, 10.7 gallons at 30/50, or 9.3 gallons at 40/60. Size your tank based on drawdown, not equivalency rating. (Specs sourced from Flotec/Pentair product documentation.)

If your household has water treatment equipment (iron filter, softener, acid neutralizer) installed after the pressure tank, size up one tier. Treatment equipment backwash cycles create simultaneous demand that a minimum-size tank can't handle without short-cycling the pump.

Flotec pressure tank installation tips

Three installation details matter more than any other for a Flotec pressure tank's service life:

• Set the air pre-charge before adding water. Pre-charge pressure should be 2 PSI below the pump's cut-in setting. For a 30/50 PSI switch, pre-charge to 28 PSI. For a 40/60 PSI switch, pre-charge to 38 PSI. Use a standard tire gauge on the Schrader valve at the top of the tank. Doing this with water already in the tank gives an inaccurate reading.
• Power down and drain before any service. Disconnect power to the well pump and relieve all water pressure by opening a downstream faucet until the gauge reads zero before checking pre-charge, replacing the bladder, or servicing any connections.
• Check pre-charge annually. Pre-charge drops slowly over time. A tank that's lost its pre-charge delivers less drawdown than rated, causes the pump to short-cycle, and accelerates pump wear. Five minutes of annual maintenance extends system life by years.

Which Flotec Pump Do I Need?

Match your application below to the right Flotec product family. Every category links directly to the products in stock.

Why Choose Flotec Pumps?

Flotec is a trusted name in water handling equipment, offering dependable performance across a wide range of applications.

Advantages of Flotec Pumps:

✔ Proven reliability
✔ Designed for residential and commercial use
✔ Durable materials and components
✔ Easy maintenance and installation
✔ Backed by manufacturer support

Choosing the Right Flotec Pump

When selecting a Flotec pump, consider:

• Type of application (sump, sewage, utility, booster, well)
• Required flow rate and head height
• Solids handling capability
• Power source and duty cycle
• Installation environment

If you’re unsure which pump is right for your application, the Cleanflow team is available to help you select the correct model.

Why Buy Flotec Pumps from Cleanflow?

Cleanflow is a trusted supplier of professional water handling equipment serving customers across Canada and the United States.

✔ Authorized Flotec distributor
✔ Expert technical support
✔ Fast and reliable shipping
✔ Commercial and contractor pricing
✔ 30-day returns and exchanges through our returns portal