ADEY MagnaClean Micro2® Magnetic Filter for Hydronic Heating Systems - NSF Certified

Compact Design, Powerful Magnetite Protection, and 2-Minute In-Line Installation

Don't be fooled by its size. The ADEY MagnaClean Micro2® is a compact magnetic filter made to deliver exceptional protection against magnetite and other debris in smaller hydronic heating systems. It captures both magnetic and non-magnetic contaminants from day one of installation, protecting the boiler and extending system life.

NSF-61 and NSF-14 certified, and meeting ASTM D1784 standards, the Micro2 pairs a powerful ultra-thin magnetic sheath with 360° rotational valves and bi-directional flow for maximum installation flexibility. In-line installation takes just two minutes.

Installer Benefits of the MagnaClean Micro2®

The Micro2 is built around the contractor's workflow. Every design decision, from the rotational valves to the removable sheath, reduces time on the job without compromising filtration performance.

Key Features of the ADEY MagnaClean Micro2®

• High-Performance, Compact Filter: Captures magnetic and non-magnetic debris efficiently, protecting smaller heating systems against the full range of hydronic contaminants including magnetite sludge.
• Ultra-Thin Sheath Enhances Magnetite Capture: The ultra-thin stainless steel magnetic sheath maximizes surface area for magnetite capture, pulling suspended particles from the system water on the first pass.
• 2-Minute In-Line Installation: In-line installation can be completed in just two minutes. Whether fitting on a new boiler or retrofitting on an existing system, the Micro2 minimizes installation time on every job.
• 360° Rotational Valves: Rotational valves provide multiple installation configurations, giving contractors the flexibility to fit the Micro2 in tight or awkward pipework positions.
• Bi-Directional Flow: Either port can serve as the inlet, eliminating orientation restrictions and further increasing installation flexibility across different pipework layouts.
• Removable Sheath for Easy Servicing: The quick-release sheath removal makes annual servicing fast and clean. The low-profile drain valve is designed for easier access in confined spaces.
• Direct Chemical Dosing: ADEY MC1+ inhibitor and other system chemicals can be dosed directly into the canister, combining filtration and treatment in a single service step.

Specifications

Homeowner Benefits

Fitting a MagnaClean Micro2® protects the boiler and heating system from the moment it is installed, delivering measurable efficiency and cost benefits over the life of the system.

• Estimated 7% annual saving on heating bills: Based on independent research by KIWA Gastec on gas usage
• Immediate and ongoing boiler protection: Magnetite capture begins from day one
• Extended system life: Clean system water reduces wear on the boiler, circulator, and heat exchanger
• Reduced carbon emissions: A cleaner, more efficient system burns less fuel

Installation and Servicing

The MagnaClean Micro2® by Adey should be installed by a qualified heating contractor. It can be installed anywhere before the boiler; for best performance, fit it after the last radiator and before the boiler returns. Always follow applicable electrical and safety standards during installation.

Store the unit in a dry, frost-free location in its original packaging if not installed immediately. Use the tool provided in the pack to tighten the lid. At each annual service, check the lid seal for wear and replace as needed. Valuable materials in the filter assembly can be recovered or recycled at the end of its useful life.

Get the ADEY MagnaClean Micro2® Today

The ADEY MagnaClean Micro2® Magnetic Filter from Cleanflow delivers compact, high-performance magnetite protection with the fast installation and easy servicing that contractors expect from ADEY.

Buy the ADEY MagnaClean Micro2® today and protect your heating system against magnetite, debris, and costly breakdowns from day one.