Vulcan Hoist

Vulcan Hoist at a Glance

Vulcan Hoist is a Montreal-based Canadian manufacturer of lifting solutions, founded in 1947, and the only Canadian manufacturer of electric chain hoists, trolleys, and winches. Their product line covers electric and manual chain hoists, ratchet pullers, pump lifting systems, trolleys, and beam clamps, all built to ASME safety standards and designed for Canadian industrial conditions. Vulcan products are trusted on construction sites, in manufacturing plants, water and wastewater facilities, and heavy-industry operations across the country.

Shop Vulcan Hoist by Category

Vulcan products at Cleanflow are organized into two families. Use the category that matches your job:

Chain Hoists and Pullers

Manual chain blocks and ratchet pullers for general-purpose lifting and pulling. Includes the ultra-compact Mini XT series (1/4T–1/2T) for tight spaces, and the Nova Triple Spur Gear pullers (1/4T–6T) for heavier industrial work. All meet ASME B30.16 or B30.21 safety standards.

Shop Chain Hoists and Pullers →

Pump Lifting Equipment

Specialized hoists and accessories for safely removing submersible pumps from pits and wet wells. Built around the Vulcan Model C hand-operated hoist with 1,650 lb capacity, designed to pair with the Flygt pump lifting chain and davit.

Shop Pump Lifting Equipment →

Why Choose Vulcan Hoist?

Vulcan Hoist delivers strength, safety, and reliability for industrial lifting. Products are made from high-strength alloy steel and tested at 150% of rated capacity, with ASME B30.16 (chain hoists) and B30.21 (lever hoists) compliance, full-rotation hooks, overload-tested components, and serial-numbered nameplates with testing and inspection certificates.

The Mini XT chain blocks are tested for over 1,500 cycles. Below are the four Vulcan products stocked at Cleanflow.

Vulcan Hoist Capacity Comparison Chart

Match your load to the right Vulcan product:

Product	Capacity	Lift Height	Unit Weight
Vulcan Mini XT Ratchet Pullers	0.25T – 0.5T (550–1,100 lb)	5 ft standard	1.5 kg (3.3 lb)
Vulcan Mini XT Chain Blocks	0.25T – 0.5T (550–1,100 lb)	10 ft standard (custom available)	2.5 kg / 4.5 kg
Vulcan Nova Triple Spur Gear Ratcheting Chain Pullers	0.25T – 6T (550–13,200 lb)	5 ft standard (custom available)	Varies by capacity
Flygt 13430006 Vulcan Model C Pump Lifting Chain Hoist	Up to 1,650 lb	Pairs with 9/32" Flygt chain (varies by length)	Plated steel construction

All Vulcan products ship with a testing and inspection certificate, a serial-numbered nameplate, and a 2-year warranty (Mini XT) or 1-year warranty (Nova). For higher capacities, custom lift heights, or electric hoist requirements, contact our team for special-order quoting.

Flygt 13430006 Vulcan Model C Hand Operated Pump Lifting Chain Hoist

The Flygt 13430006 Vulcan Model C Hand Operated Pump Lifting Chain Hoist is designed for safely removing Flygt submersible pumps from pits using a 9/32" galvanized lifting chain. Built with a plated steel hand chain and a swivel top hook with a safety clasp, it is typically paired with the Flygt Pump Lifting Davit for secure operation. To use, the pump lifting chain is fed into the hoist and operated until the pump is fully lifted out of the pit. The hoist has a maximum lifting capacity of 1,650 lbs.

Vulcan Mini XT Series Compact Lightweight Ratchet Pullers

Vulcan Mini XT Series Compact Lightweight Ratchet Pullers offer a cutting-edge solution for lifting and pulling tasks, combining an ultra-compact design with exceptional strength and durability. Weighing just 1.5 kg, these are recognized as the world's smallest lever hoists, featuring 360-degree rotating top and bottom hooks for versatile rigging and an ultra-short 360-degree handle rotation for ease of operation. Constructed with heat-treated alloy steel components and an aluminum alloy cover, they boast a robust fork-type cast-steel safety latch and a weatherproof zinc-plated grade 100 chain for long-lasting performance in all conditions.

Vulcan Mini XT Compact Lightweight Chain Blocks

Vulcan Mini XT Compact Lightweight Chain Blocks are ultra-portable, compact, and lightweight manual hoists available in 1/4 and 1/2 metric ton capacities. Weighing only 2.5 kg (XBM0.25T) and 4.5 kg (XBM0.5T), they offer an exceptional capacity-to-weight ratio. These hoists feature heavy-duty fork-type cast steel safety latches, grade 100 zinc-plated lift chains, and zinc-plated hand chains that can be used at various angles. Both top and bottom hooks swivel 360 degrees, enhancing maneuverability. Tested for over 1,500 cycles and weather-resistant with integrated drainage channels, they are designed for reliable outdoor and indoor lifting tasks with a standard 10-foot lift height, customizable upon request.

Vulcan Nova Triple Spur Gear Ratcheting Chain Pullers

The Vulcan Nova Triple Spur Gear Ratcheting Chain Pullers cover the widest capacity range in the Vulcan manual line, from 1/4 ton (550 lb safe working load) up to 6 tons (13,200 lb). Built with heat-treated alloy steel chain, heat-treated forged steel hooks, a triple spur gear drive, and single-handed free-wheeling for fast slack take-up. Standard 5-foot lift height with custom lengths available. Approved to ANSI B30.11 with a one-year warranty. Pulling effort ranges from 31 lb at the 3/4T model to 76 lb at the 6T model. Best suited for heavier industrial lifting where the Mini XT capacity is exceeded.

Choosing the Right Vulcan Hoist for Your Job

Use this guide to match the use case to the right Vulcan product family:

Removing a submersible pump from a wet well or lift station

Use the Flygt 13430006 Vulcan Model C with a Flygt galvanized 9/32" lifting chain and a Flygt pump lifting davit. The Model C is purpose-built for this exact job and rated 1,650 lb, sufficient for most municipal and industrial submersible pumps.

Lifting in tight spaces where a full-size hoist won't fit

Use a Vulcan Mini XT Ratchet Puller. At 1.5 kg with an ultra-short 360° handle rotation, it's the world's smallest lever hoist and operates one-handed in confined areas. Best for loads up to 1,100 lb.

Portable manual lifting on a jobsite or in a workshop

Use a Vulcan Mini XT Chain Block. Weather-resistant with integrated drainage channels, ideal for outdoor jobsite use. 10-foot standard lift covers most overhead lifting tasks; custom lengths available for higher beams.

Heavier industrial lifting (1.5T to 6T)

Use a Vulcan Nova Triple Spur Gear Ratcheting Chain Puller. The triple spur gear and free-wheeling design handle heavy loads with manageable pulling effort. ANSI B30.11 approved.

Buy Vulcan Hoists Online from Cleanflow

Cleanflow stocks Vulcan Hoist's chain pullers, chain blocks, and pump lifting hoists for municipal, industrial, and contractor use across Canada. Browse the categories above, or call our team at 1-866-335-1078 for product selection help, custom lift heights, or special-order quotes on the broader Vulcan electric and manual range.

What is the Flygt 13430006 Vulcan Model C Pump Lifting Chain Hoist used for?

The Flygt 13430006 Vulcan Model C Hand Operated Pump Lifting Chain Hoist is specifically designed to safely remove Flygt submersible pumps from pits using a 9/32" galvanized lifting chain. It features a plated steel hand chain, a swivel top hook with a safety clasp, and is often paired with the Flygt Pump Lifting Davit to ensure secure and efficient operation.

Why is the Flygt hoist usually paired with the Flygt Pump Lifting Davit?

The Flygt Pump Lifting Davit provides stable support and positioning during pump retrieval, ensuring the hoist operates safely. When paired together, they minimize risks of equipment damage or operator injury by keeping the lifting process secure, balanced, and properly aligned.

What makes Vulcan Mini XT Series Ratchet Pullers unique in the market?

The Vulcan Mini XT Series Ratchet Pullers are the world’s smallest lever hoists, weighing just 1.5 kg while still offering exceptional strength and durability. Their compact design, ultra-short 360° handle rotation, and 360° swivelling hooks make them ideal for tight spaces and precision lifting.

What safety features are included in Vulcan Mini XT Ratchet Pullers?

These ratchet pullers include heavy-duty fork-type cast-steel safety latches and a secure chain system to prevent accidental slips. Their overload-tested components and precision engineering enhance operator safety in demanding lifting and pulling applications.

How do Vulcan Mini XT Chain Blocks ensure long-term reliability?

Vulcan Mini XT Chain Blocks are tested for over 1,500 cycles and feature weather-resistant drainage channels for reliable performance in challenging environments. Zinc-plated chains and heavy-duty safety latches provide corrosion resistance and consistent long-term safety.

Are Vulcan hoists made in Canada?

Yes. Vulcan Hoist is headquartered in Montreal, Quebec, and is the only Canadian manufacturer of electric chain hoists, trolleys, and winches. Their manual product line, including the Mini XT and Nova series, is also produced under Vulcan's quality and testing protocols. Cleanflow ships Vulcan products from our Winnipeg warehouse across Canada and the continental USA.

How do I choose between the Mini XT and Nova series?

Choose the Mini XT (Ratchet Puller or Chain Block) for loads up to 1,100 lb, tight-space lifting, or when portability is the priority. They weigh 1.5–4.5 kg. Choose the Nova Triple Spur Gear Pullers for loads from 1.5 tons up to 6 tons, or whenever the Mini XT capacity is exceeded. Both lines meet ASME safety standards and ship with a testing and inspection certificate.