General Pipe Cleaners Jetter Nozzle Set - 3/8" FNPT

The General Pipe 3/8" Jetter Nozzle Sets includes 4 water jetter nozzles with 3/8" Female NPT threads. Note: Not all 3/8" jetter nozzles will work properly with all jetters that have 3/8" NPT hose ends even though the nozzles will thread onto the hose fitting.  To develop the optimum spray pattern and/or to prevent pressure pump damage,  jetters that produce more pressure and volume require nozzles with larger orifices. Jetters that produce less pressure and volume require nozzles with smaller orifices. Please refer to the table below.

• 3/8" FNPT penetrating nozzle with forward jet - 15°. Forward jet cuts though grease, dislodges mud and debris, and melts ice. Narrow spray pattern to the rear offers maximum thrust to push the hose down the line.

• 3/8" FNPT penetrating nozzle - 15°

• 3/8" FNPT flushing nozzle - 40°. Wide spray pattern clears debris and flushes the line clean. Good finishing tool after the stoppage has been cleared.
  

• 3/8" FNPT spring leader nozzle. Flexible spring on the front of the nozzle helps guide hose around tight bends. Narrow spray pattern to the rear offers maximum thrust to push the hose down the line.