Tectite Push-to-Connect 1/2" and 3/4" Demount Clips
Checkout securely with
Tektite fittings are designed to be reused, but they can only be removed using the low cost Tektite Demount Clip. To use the Tektite Demount Clip select the correct size 1/2" or 3/4" Tectite removal tool for the job.
Place the removal tool around the tube next to the fitting assembly. The flat side of the tool should be placed in contact with the fitting. Push the removal tool toward the fitting firmly until the grab ring is compressed.
With the removal tool firmly held in place, use a twisting, and pulling motion to remove the tube from the fitting. Release the removal tool after the tube is removed.