Equipment
Should I Choose an Inground or Above Ground Pool Pump?
Above Ground Pumps
If you have a semi inground swimming pool, then you'll need to decide whether to use an inground pump or an above ground pump. An above ground pump is typically 110/120 volt with a standard wall plug, and relies on gravity pushing water down in to the pump basket for priming.
To help you decide, you'’ll need to consider where your pump is located in relation to the pool's water level as well as the voltage. You’ll need an inground pump if the pool or pool water level is below the plane where the pump is installed, so be sure to consider where your pump is installed prior to purchasing a new pump.
Inground Pumps
An inground pump does not require gravity fed water like an above ground pump does, and is able to draw the water from the lower pool into the pump - this is known as self priming. Typically, inground pumps are 220 volt with the ability to switch to 110 volt, and most inground pumps need to be hardwired for installation.
You'll need an inground pump if the pool or pool water level is below the plane where the pump is installed, so be sure to consider where your pump is installed prior to purchasing a new pump.
What Is The Difference Between An Above Ground And Inground Pump?
An above ground pump is typically 110/120 volt with a standard wall plug. Typically, inground pumps are 220 volts with the ability to switch to 110 volt, and most inground pumps need to be hardwired for installation. An inground pump does not require gravity fed water like an above ground pump, which relies on gravity pushing water down in to the pump basket for priming. For this reason, an inground pump is sometimes referred to as a self-priming pump.
Troubleshooting Pool Pump Issues
The following issues are common problems that indicate you should replace your pool pump:
- The pump isn't moving water
- The motor isn't working or turns off after a bit
- The pump is leaking water
- The motor is sucking in air
- The pump is making a loud noise
For more information on how to troubleshoot most common pool pump issues, visit our How To Guides section.
Can I Install A Pool Pump Myself?
Yes! The pump, while being a critical part of the pool system, can easily be installed by anybody with the right tools. In fact, you'll save a lot of money purchasing and installing your pool pump yourself. Always ensure to disconnect your electrical supply at the main panel before attempting to disconnect or reconnect your pool pump. It is recommended to use a licensed electrician if you are unsure of how to safely and properly replace your existing unit.
Contrary to belief, a larger pump is not always a benefit to your pool. Unless you have been advised by a pool professional, or someone in the know that your existing pump was undersized, it would be wise to replace your existing pump with the same horsepower pump, or with an energy saving and more efficient variable speed pump.