Description
Lightweight Yellow Forestry Fire Hose Sold by the Foot, 300 PSI
Overview
Wildfire season in the BC Interior starts before the calendar says it should, and crews stock hose by the pallet before the first smoke report. This yellow forestry fire hose weighs half as much as double jacket alternatives while holding a 300 PSI working pressure. Sold by the foot with no couplings attached, it lets forestry teams build lines to exact length.
Specifications
| Specification | 1" Hose (G1923-100) | 1-1/2" Hose (G1923-150) |
|---|---|---|
| Hose Inside Diameter | 1" | 1-1/2" |
| Bowl Size (Layflat Width) | 1-3/16" | 1-11/16" |
| Working Pressure | 300 PSI | 300 PSI |
| Test Pressure | 600 PSI | 600 PSI |
| Weight | 0.07 lb/ft | 0.14 lb/ft |
| Tube | Clear polyurethane | |
| Cover | Yellow, single-jacket, circular woven polyester | |
| Temperature Range | -40°F to +158°F (-40°C to +70°C) | |
| Standard Lengths | 50 or 100 ft (also sold by the foot) | |
| Certifications | UL Listed, NFPA Compliant, USDA FSS 5100-187 Type 2 | |
Key Features
Half the Weight of Double Jacket Hose
The G1923 weighs half as much as a double jacket hose at the same 300 PSI pressure rating. This lightweight forestry fire hose cuts the carry weight for teams packing lines into terrain where vehicle access ends.
300 PSI Working Pressure
Yellow forestry hose holds 300 PSI working pressure and 600 PSI test pressure. That matches the ratings of heavier hose without the added bulk, giving departments a lighter option for relay lines and direct attack.
Chemical and Petroleum Resistance
The clear polyurethane liner handles contact with some chemicals and petroleum-based products. Where standard rubber-lined hose breaks down from fuel splashes or solvent exposure, the G1923 tube holds up longer.
Yellow Cover for Smoke and Brush Visibility
Operators and safety officers spot a high visibility fire hose line immediately in smoke, underbrush, and low light. The yellow cover eliminates the guesswork of locating white hose on scorched or snow-covered ground.
Wide Temperature Range
The G1923 operates from -40°F to +158°F (-40°C to +70°C). Hose stored through a northern winter deploys without cracking, and the tube tolerates radiant heat during ground operations within its rated range.
UL Listed and NFPA Compliant
This UL listed forestry hose meets USDA Forestry Service Specification 5100-187 Type 2, the procurement standard for single jacket forestry hose used by agencies and departments across North America.
Weight and Packability: Single Jacket vs Double Jacket
The question of single jacket vs double jacket fire hose comes down to weight, abrasion resistance, and how far the crew carries it. The G1923 is the lightweight forestry fire hose option for teams who need 300 PSI without the bulk.
| Hose Type (1-1/2" ID) | Weight per Foot | 100 ft Line Weight |
|---|---|---|
| G1923 Yellow Single Jacket | 0.14 lb/ft | 14 lb |
| Double Jacket Fire Hose (300 PSI)* | ~0.28 lb/ft | ~28 lb |
Crews packing a lightweight fire hose for wildland firefighting into remote terrain on foot, loading it by helicopter, or rolling it into tight compartments on a wildland engine notice the difference immediately.
For front-line municipal firefighting where abrasion resistance matters more than portability, double jacket fire hose is the more durable choice. For lower-pressure forestry service where cost matters more than pressure, Cleanflow also carries standard 150 PSI single jacket forestry hose by the foot.
Applications
Wildland and Forestry Fire Suppression
Forestry crews, rural fire departments, and wildfire contractors use the yellow forestry fire hose as a primary attack or relay line in brush, timber, and grassland. The high visibility fire hose cover stands out in smoke and underbrush during active operations, and the hose rolls flat for storage between deployments.
Hydrant Flushing and Municipal Maintenance
A short length coupled with NPSH or forestry instantaneous fittings handles seasonal hydrant flushing and water main testing. The 300 PSI rating exceeds hydrant outlet pressure with margin to spare.
Construction Site Water Supply
Contractors running water across a site use a fire hose by the foot because it lays flat when empty, rolls tight for transport, and handles the pressure of a direct hydrant connection without a separate pressure reducer.
Agricultural and Rural Property Protection
Landowners in fire-prone regions stock yellow fire hose for forestry crews and their own property protection lines. A length of UL listed forestry hose connected to a pump or hydrant gives any rural property a standby water supply that deploys in minutes.
Water Transfer and Temporary Supply Lines
The polyurethane liner and chemical resistance suit temporary water transfer where rubber hose degrades from fuel or solvent contact. The hose lays flat when drained and stored in less space than a rigid pipe.
Buy Yellow Forestry HoseF Online from Cleanflow
Cleanflow Utility Supply Company stocks fire hose and fittings for fire departments, forestry crews, municipalities, and contractors across Canada and the United States. Order the G1923 yellow forestry fire hose by the foot or in 50-foot rolls, with free shipping on orders over $199 and a 30-day return policy. Email info@cleanflow.ca for volume pricing, coupling questions, or to match hose to your fitting standard. Cleanflow ships from Canadian stock with no customs delays for Canadian buyers.
Frequently Asked Questions
What is the weight difference between yellow single jacket and double jacket forestry hose?
Yellow forestry hose weighs half as much as double jacket hose at the same 300 PSI rating. A 100-foot length of 1-1/2" G1923 weighs 14 lb. Double jacket hose at the same diameter weighs roughly 28 lb, saving 14 lb per line on the carry-in.
Can the G1923 handle chemicals or petroleum products?
The polyurethane tube tolerates contact with certain fuels, solvents, and petroleum-based fluids but is not rated for continuous chemical service. For sustained chemical exposure, a chemical resistant forestry hose or dedicated chemical transfer hose is the safer choice.
How do I order a fire hose by the foot from Cleanflow?
Select "Per Foot (Continuous Length)" on the product page, then set the quantity to the number of feet needed. A quantity of 75 gives one continuous 75-foot length of hose. Pre-cut 50-foot rolls are also available as a separate option on the same page.
What couplings fit the GREENLINE yellow forestry hose?
Hardcoat aluminum or brass NPSH expansion couplings and aluminum instantaneous forestry couplings fit the G1923. Cleanflow stocks matching couplings, adapters, shanks, caps, and replacement gaskets in the fire hose and fittings collection.
Is this yellow forestry fire hose suitable for municipal fire departments or only forestry?
The 300 PSI fire hose rating, UL listing, and NFPA compliance meet both forestry and municipal requirements. Municipal departments that need heavier abrasion protection for structural firefighting often choose double jacket hose for front-line attack, while the G1923 works well for relay and supply duty.
Similar Products
Featured collection
