✅ This item is normally regularly stocked. Shipping times may vary depending on availability. Please contact us to confirm stock and shipping times. You will receive tracking details once the item has shipped.
Description
Replacement Liner for the Hy-Arctic Shell, or Worn on Its Own
This is the insert that goes inside the Raber Hy-Arctic mitt, sold on its own as a replacement or a spare. It is a layered, quilted liner: a nylon outer over thermal insulation and soft cotton, faced with warm wool against the hand. Snaps hold it inside the goatskin shell, and it is warm enough to wear alone for lighter tasks. Sized Small through X-Large.
Key Features of Raber Hy-Arctic Mitt Liner Insert
- Shaped to the hand: A curved pattern follows a relaxed hand, so the liner sits right inside the shell or on its own.
- Layered for warmth: A quilted nylon outer traps heat over thermal insulation and cotton.
- Warm wool facing: The inside is faced with wool, the layer that sits against your skin.
- Reinforced cuff: A tougher wool cuff adds durability where the liner meets the shell.
- Snap fasteners: Snaps at the top lock the liner into the goatskin Hy-Arctic shell.
- Wear it alone: Warm enough on its own for light tasks or milder cold.
- Canadian-made by Raber: Sewn in Winnipeg as the matched liner for the Hy-Arctic.
Specifications
| Category | Details |
|---|---|
| Brand | Raber Glove |
| Model | Hy-Arctic Insert (HYARC-L-L) |
| Product type | Replacement mitt liner insert (liner only, no shell) |
| Construction | Layered; nylon twill quilted with thermal insulation and spun cotton, faced with wool serge |
| Cuff | Duck-face wool serge |
| Attachment | Dome fasteners to the Hy-Arctic goatskin shell |
| Fit | Natural curved hand pattern |
| Use | Replacement liner or standalone |
| Includes | One pair (liner only) |
| Sizes | Small, Medium, Large, X-Large |
| Country of manufacture | Made in Winnipeg, Manitoba, Canada |
Applications
- Replacing a worn or lost Hy-Arctic liner
- A spare liner, so one can dry while you keep working
- Standalone warmth for light tasks in milder cold
- An extra insulating layer for snowmobiling, hiking, and cold-weather work
This liner is made for the Hy-Arctic. If you need a complete glove or mitt instead, the leisure gloves and mitts and work gloves categories cover lined and unlined options.
Care Instruction
Pull the liner out of the shell to dry it after heavy use, and air dry it away from direct heat. Wool can felt and shrink in hot water, so wash gently and cool if it needs it, and follow any care label on the liner.
Buy the Raber Hy-Arctic Liner Insert Online from Cleanflow
As an authorized Raber distributor, Cleanflow ships the Hy-Arctic liner insert from Winnipeg to addresses across Canada and the United States. Shipping is free over $199, and Raber volume discounts apply if you are stocking up.
Frequently Asked Questions
Does this liner come with the shell?
No. This is the liner only, with no goatskin shell. It is sold on its own to replace a worn liner or as a spare. If you need the complete mitt, that is the Raber Hy-Arctic mitt.
Is this the same liner that comes inside the Hy-Arctic mitt?
Yes. It is the matched liner, sold separately so a worn or lost original swaps straight out for a fresh one.
How is this different from the wool mitten liner inserts?
This Hy-Arctic liner is a structured, quilted liner shaped for the goatskin Hy-Arctic shell and held in with snaps. The wool mitten liner inserts are a simpler knit-wool liner for the unlined 342 and 350K mitts.
Is the liner removable, and can I replace it?
Yes. Dome fasteners snap the liner into the goatskin shell, so you can pull it out to dry it or swap in a fresh Hy-Arctic liner insert without replacing the whole mitt.
✅ This item is normally regularly stocked. Shipping times may vary depending on availability. Please contact us to confirm stock and shipping times. You will receive tracking details once the item has shipped.
Similar Products
Featured collection
