ADEY Inhibitor Test Strips – Quick & Precise Inhibitor Measurement for Hydronic Heating System

Fast and Accurate Inhibitor Concentration Testing No Setup Required Test Inhibitor Strips

The ADEY Inhibitor Test Strips delivers fast and accurate testing of inhibitor concentration in hydronic heating systems. This hydronic heating inhibitor test strip reads inhibitor levels directly from a small water sample, providing a clear color-coded result in a matter of seconds with no laboratory, no calibration, and no initial set-up required. Available in airtight waterproof containers and manufactured under ISO 9001 quality standards.

For On-Site Hydronic Inhibitor Level Verification

The ADEY Quick Test Inhibitor Strip is a cost-effective alternative to other inhibitor testing solutions on the market. It provides onsite testing with no initial set-up requirements, making it practical for use across multiple job sites in a single day without carrying additional equipment.

This makes it an essential tool for every boiler service call, post-flush system recommission, and routine water quality check. If you are looking to buy ADEY inhibitor test strips, each 50-strip canister covers 50 individual service visits at one test per call.

Key Features of ADEY Inhibitor Test Strips

• Fast & Accurate Corrosion Detection: Quickly identify the presence of corrosion in your heating systems.
• Ease of Use: Simple, straightforward application for immediate results.
• Onsite Testing Capability: No need for initial setup, ideal for use in various locations.
• Swift Results: Get corrosion level readings within seconds.
• Economical Choice: An affordable alternative to more expensive testing methods.
• Secure Packaging: Comes in airtight, waterproof canisters, ensuring strip integrity.
• Quantity: Each canister contains 50 test strips, with master packs of 18 canisters.

Specifications

Why Choose ADEY Quick Test Inhibitor Strips

These inhibitor test strips give contractors and building owners fast, reliable on-site confirmation that inhibitor concentration in the system water is adequate, without the cost or delay of laboratory testing.

• Easy to use: No technical expertise, no equipment, and no initial set-up required
• Fast and accurate testing: Results in a matter of seconds directly from a small water sample
• Onsite testing capability: Suitable for use across multiple locations in a single day
• Cost-effective alternative: Professional-grade inhibitor concentration testing at low cost per test
• Airtight waterproof container: Preserves strip accuracy from first use through the last strip in the canister
• 50 strips per canister: High test count for contractors on busy service routes
• ISO 9001 quality manufacturing: Consistent, reliable performance across every canister

These features eliminate guesswork about system inhibitor status and support a documented, repeatable water quality check at every hydronic heating service call.

Applications

The ADEY Quick Test Inhibitor Strip is used across a wide range of hydronic heating maintenance scenarios:

• Annual boiler service visits to verify inhibitor concentration before the heating season
• Post-flush system recommissioning to confirm inhibitor levels after cleaning
• After any full or partial system drain-down that may have diluted inhibitor concentration
• New system commissioning to verify that inhibitor was correctly dosed at startup
• Radiant floor heating systems where regular inhibitor top-up is part of the maintenance plan
• Light commercial hydronic systems requiring routine water quality monitoring
• Retrofit projects where the existing inhibitor type and concentration are unknown

Its simple dip-and-read method and no-setup design make it suitable for residential service calls and commercial building maintenance programs alike.

How to Use ADEY Quick Test Inhibitor Strips

The Quick Test Inhibitor Strip by Adey requires only a small water sample from the system. The five-step process is the same at any job site with no equipment or preparation needed.

• Step 1: Drain a small sample of system water from the system.
• Step 2: Dip the strip in water for 1 second.
• Step 3: Shake off excess liquid.
• Step 4: Leave for 10 seconds as the water soaks into the pad.
• Step 5: After 10 seconds compare the result with the color scale on the side of the canister to indicate inhibitor concentration level.

Record the result, system address, and test date in your service documentation. If the result indicates a low or absent inhibitor, top up with the ADEY MC1+ inhibitor and retest after allowing the inhibitor to fully circulate through the system.

Get ADEY Quick Test Inhibitor Strips Today

The ADEY Quick Test Inhibitor Strip from Cleanflow delivers fast and accurate inhibitor concentration testing in a convenient 50-strip airtight canister. Easy to use, results in seconds, and a cost-effective alternative to other solutions on the market; it belongs in every hydronic heating contractor's service bag.

Buy ADEY inhibitor test strips today and add a fast, accurate inhibitor check to every hydronic heating service call.