Baffin Monster External MetGuard 8 Inch Work Boots, Waterproof Leather Upper, Composite Toe + Plate + External Metatarsal Guard, CSA Approved, Black, Sizes 9–13

Composite Toe MetGuard Work Boots for Heavy Industrial Sites

The Baffin Monster External MetGuard 8 is the Monster 8 inch boot with a rigid composite shield on the outside of the toe and over the laces, protecting the top of the foot from dropped objects and impact. Same waterproof leather upper, anti-fatigue cushioning, and 100g insulation as the standard Monster 8 inch, but with full CSA Metatarsal Grade 1 protection added.

Key Features of Baffin Monster External MetGuard Work Boots

• External metatarsal guard work boots with a rigid composite shield on the outside of the boot, covering the top of the foot above the toe cap, protecting the bones from dropped objects, rolling equipment, or heavy impact
• Composite safety toe and plate protect against falling objects and sharp objects underfoot, with no metal anywhere in the safety construction, a safer choice on electrical worksites
• Waterproof leather upper with a breathable lining keeps your feet dry through wet snow, slush, washdowns, and rain
• Anti-fatigue insole and cushioned middle layer absorb shock and spring back with every step, easing leg and back fatigue across long shifts on hard surfaces
• Light 100g insulation keeps the foot comfortable in cool and moderate weather, suiting year-round wear in fall, spring, and milder winter shifts
• Speed laces glide quickly through smooth metal eyelets when you pull them tight, with no snagging on rebar or conduit, and a pull loop at the back helps the boot slide on quickly
• Available in sizes 9 through 13 INCLUDING half sizes (9.5, 10.5), a wider size range than most other Baffin boots in the Cleanflow lineup
• Rubber toe guard and tough plastic heel cup add extra protection at the two parts of the boot that wear out first
• Deep lug sole, oil and acid resistant, grips wet concrete, gravel, and slick industrial floors
• One customer reports four years of wear, two in an OSB mill running through mud and water, with the boot still waterproof and the laces still in place

Specifications

Certifications

• CSA Z195-14, Canadian Standards Association safety footwear standard
• CSA Grade 1 toe protection (Green Triangle), composite safety toe withstands impact up to 125 joules and plate withstands force not less than 1,200 Newtons
• CSA Metatarsal Grade 1 (Yellow Triangle), external metatarsal guard certified to protect the top of the foot from impact
• CSA Electric Shock Resistant rating, sole assembly withstands 18,000 volts with leakage current not exceeding 1 mA for 60 seconds
• ASTM F2413, American safety footwear performance standard
• ASTM EH (Electrical Hazard) rated
• CE marked for European safety compliance
• Slip resistance tested per CSA Z195-14 for Coefficient of Friction on quarry tile and stainless steel, wet and dry, at both room temperature and cold-climate conditions

Caring for Your Baffin Monster External MetGuard Work Boots

• Leather upper: apply a non-coloured shoe cream to the surface every few weeks to keep the leather supple and water-resistant
• Rubber sole and metguard surface: wipe with a damp cloth to remove dirt and grime
• Let the boot air dry naturally, do not use a heater, dryer, or direct flame to speed up drying
• Inspect the metatarsal guard after impact, replace the boot if the guard shows cracks or visible damage
• Before storing, remove all dirt and debris from the rubber, leather, and metguard
• Make sure the boot is fully dry before putting it away
• Store in a dark, dry, and cool place to protect the leather from UV damage and heat

Who This Boot Is For

• Welding shops, where sparks, slag, and dropped electrodes hit the top of the foot
• Foundries and metal fabrication, with hot metal splash and dropped tools
• Logging and lumber yards, with rolling logs and chainsaw work
• Mining, drilling, and quarry sites, with falling rock and equipment impact
• Heavy materials handling, forklift areas, pallet handling, warehouse loading
• Construction sites with rebar handling, dropped tools, and overhead work
• Manufacturing floors with heavy machinery, dies, and parts handling
• Any worksite where the safety officer specifies CSA Grade 1 Metatarsal-certified footwear

Buy Baffin Monster External MetGuard Work Boots Online from Cleanflow

Cleanflow is an authorized Baffin supplier shipping the Monster External MetGuard 8 across Canada and the continental USA, with free shipping on eligible orders over $199. The waterproof leather upper, composite safety toe, plate, and external metatarsal guard are made at Baffin's Stoney Creek, Ontario factory, where the company has produced Canadian-made footwear since 1979. Every pair is backed by Cleanflow's 30-day return and exchange policy and full Baffin manufacturer warranty support through returns.cleanflow.net.

Browse the full Baffin work boot collection at Cleanflow to compare every model in the lineup.