✅ This brand is a high volume bestseller, and is frequently restocked to meet demand. If the product happens to sell out close to the time you purchase, you may experience a slight delay in shipping. Please rest assured that if we anticipate any significant delay, we will contact you as soon as we learn this.
Please feel free to review your order status on your order page, or use the chat on our website for updates on availability and your order status.
Description
Hi-Vis Winter Safety Boots for Construction and Industrial Work
The Baffin Constructor Hi-Vis is a mid-height composite toe winter safety boot with a neoprene and leather upper, fixed frost plate footbed, and the same eight-layer inner boot system Baffin uses across its -100°C line. At 13.5 inches tall and 9.66 lbs per pair, it sits between the slip-on Icebear and the tall Derrick in the Baffin lineup. CSA, ASTM, and CE certified.
Key Features of Baffin Constructor Hi-Vis Winter Safety Boots
- Hi-vis winter safety boots for construction crews, manufacturing floors, and agricultural sites, with reflective strips that keep the wearer visible during early-morning and evening shifts
- Neoprene and leather upper combines chemical resistance with abrasion resistance, suiting jobsites where boots take impact and scuffing as well as wet exposure
- Composite safety toe and plate protect against impact and sharp objects underfoot, with no metal anywhere in the safety hardware, a safer choice on electrical worksites
- Fixed frost plate footbed reflects body heat back toward the foot and blocks cold from radiating up through the sole, an advantage when standing on frozen concrete or cold steel grating
- Removable eight-layer inner boot system traps body heat and pulls sweat away from the foot, with the inner boot sliding out for overnight drying
- Pull loop at the back of the boot lets crews get the foot in fast, with traditional laces for a secure fit through the workday
- GelFlex® cushioned midsole and oil and acid resistant rubber outsole with multi-directional lug pattern hold traction on snow, ice, and wet concrete
Baffin Technology Inside the Constructor
-
Eight-layer inner boot system:
- Thermaplush™ Wicking
- B-Tek™ Foam Comfort Lining
- Double B-Tek™ Heat Insulation
- Hydromax™ Moisture Management
- Vapourized Aluminum Membrane
- PolyWool™ Polyester-Wool Blend
- DiamondNet™ Wind-Resistant Insulation
- Fixed frost plate footbed: a layer inside the base of the boot that reflects heat upward toward the foot and blocks cold from radiating through the sole
- GelFlex® midsole: cushioned polyurethane layer that absorbs shock and rebounds energy with every step, reducing fatigue
- B-Tek™ Dry: waterproof base technology that seals the foot from moisture without trapping sweat inside
- Real-World Tested™: every Baffin safety boot is tested in real working conditions, not just a lab, before it reaches the market
Specifications
| Specification | Detail |
|---|---|
| Brand | Baffin |
| Model | Constructor (STP variant) |
| SKU | POLAMP01-BK2 |
| Country of Manufacture | Canada (Stoney Creek, Ontario) |
| Upper Material | Oil and acid resistant Neoprene and leather |
| Toe Construction | Composite (metal-free) Safety Toe + Plate |
| Base / Shell | Lightweight Polyurethane (PU) for extreme freezing temperatures |
| Outsole | Oil and acid resistant rubber, multi-directional lug |
| Midsole | GelFlex® anti-fatigue PU |
| Footbed | Fixed frost plate for heat reflection and cold blocking |
| Inner Boot System | Removable Comfort-Fit, 8-layer multi-layer |
| Inner Boot Temperature Rating | -100°C / -148°F |
| Hi-Vis Feature | Reflective overlay on upper |
| Closure | Pull loop at back, traditional lace fastening |
| Boot Height | 13.5 inches (based on size 9) |
| External Forefoot Width | 5.5 inches (based on size 9) |
| External Length | 13.25 inches (based on size 9) |
| Weight per Pair | 9.66 lbs (size 9) |
| Slip Resistance Testing | CSA Z195-14 COF on quarry tile and stainless steel, wet and dry, at room temperature |
| Replacement Liners | Sold separately by Baffin (SKU POLAML01) |
| Available Sizes | 9, 10, 11, 12, 13 |
Certifications
- CSA Z195-14, Canadian Standards Association safety footwear standard
- CSA Grade 1 toe protection (Green Triangle), withstands impact up to 125 joules and puncture force not less than 1,200 Newtons
- CSA Electric Shock Resistant (White rectangle with orange omega), sole assembly withstands 18,000 volts with leakage current not exceeding 1 mA for 60 seconds
- ASTM F2413, American safety footwear performance standard
- ASTM EH (Electrical Hazard) rated
- CE marked for European safety compliance
- Slip resistance tested per CSA Z195-14 for Coefficient of Friction on quarry tile and stainless steel, wet and dry, at room temperature
Caring for Your Baffin Constructor
- Leather upper panels: apply a non-coloured shoe oil or wax to the surface to keep the leather supple and water-resistant
- Neoprene panels and polyurethane base: wipe with a damp cloth to remove dirt and grime
- Let the boot and inner liner air dry naturally. Do not use a heater, dryer, or direct flame to speed up drying.
- Remove the inner boot at the end of each shift to let it dry separately. This extends liner life
- Before storing, remove all dirt and debris from the rubber, leather, and nylon
- Make sure the boot is fully dry before putting it away
- Store in a dark, dry, and cool place to protect the leather and polyurethane from UV damage and heat
Applications
Baffin Constructor composite toe hi-vis winter boots are made for crews working through cold-weather shifts on jobsites where impact protection, abrasion resistance, and high visibility all matter:
- Construction sites needing CSA-certified composite toe protection
- Heavy equipment yards and outdoor industrial work in winter
- Manufacturing floors with chemical contact and cold exposure
- Agriculture, fertilizer handling, and livestock work in winter months
- Utilities and electrical hazard zones requiring metal-free toe protection
- Petrochemical and chemical processing plants
- Food processing facilities with cold-room exposure
- Cold-weather maintenance work on pipelines, rail yards, and outdoor equipment
Buy Baffin Constructor Hi-Vis Winter Safety Boots Online from Cleanflow
Cleanflow is an authorized Baffin supplier shipping the Constructor Hi-Vis across Canada and the continental USA, with free shipping on eligible orders over $199. The neoprene and leather upper, composite safety toe and plate, fixed frost plate footbed, and eight-layer inner boot system are made at Baffin's Stoney Creek, Ontario factory, where the company has produced Canadian-made footwear since 1979.
Cleanflow's 30-day return and exchange policy and full Baffin manufacturer warranty support through returns.cleanflow.net.
Browse the full Baffin work boot collection at Cleanflow to compare every model in the lineup.
Frequently Asked Questions
Are the Constructor Hi-Vis boots CSA approved?
Yes. The Constructor Hi-Vis carries full CSA, ASTM, and CE certification. The composite toe protects against impact from falling objects, the plate under the sole protects against sharp objects underfoot, and the sole protects against electric shock. These are the same certifications most Canadian and US construction sites require for safety footwear.
How does the Constructor compare to the Baffin Derrick Hi-Vis?
Both boots share the eight-layer inner boot, GelFlex® midsole, hi-vis reflective strips, and CSA certification. The Constructor stands at 13.5 inches with a neoprene and leather upper, made for construction, manufacturing, and agricultural work. The Derrick stands taller at 16.5 inches with a neoprene upper, made for petrochemical and chemical-heavy environments.
Are these boots metal-free?
Yes. The Constructor Hi-Vis is one of the few metal-free safety boots with frost plate protection. The composite toe, composite plate, and metal-free hardware make it safer for electrical hazard work and any worksite where metal in your boots is not allowed. The boot still meets full CSA safety standards.
What does the -100°C / -148°F rating mean?
Baffin's -100°C composite toe winter boots like the Constructor share a comfort rating that comes from the removable eight-layer inner boot, not the outer shell. The inner boot traps body heat and pulls sweat away from your foot. The Constructor also has a frost plate under the footbed that reflects body heat back up toward the foot, giving it extra warmth on cold floors that other Baffin models do not have.
What is the frost plate footbed?
The frost plate is a fixed layer inside the base of the boot that reflects body heat back toward your foot, while blocking cold from rising up through the sole. It is one of the reasons the Constructor handles standing on frozen concrete, cold steel grating, or icy ground for long shifts, better than boots without one.
How does the Constructor fit?
The Constructor has a pull loop at the back for easier entry, traditional laces for a secure fit, and a wider forefoot to fit thick winter socks. Baffin recommends ordering true to size. Most buyers who have ordered the Constructor through Cleanflow say it fits well right out of the box.
What sizes does the Baffin Constructor Hi-Vis come in?
Baffin makes the Constructor Hi-Vis in men's sizes 9 through 13. Check the live Cleanflow product page for current stock, as some sizes may temporarily be out of stock. Cleanflow offers a 30-day return and exchange window if the fit is off when the boot arrives. Check the size guide before purchasing.
✅ This brand is a high volume bestseller, and is frequently restocked to meet demand. If the product happens to sell out close to the time you purchase, you may experience a slight delay in shipping. Please rest assured that if we anticipate any significant delay, we will contact you as soon as we learn this.
Please feel free to review your order status on your order page, or use the chat on our website for updates on availability and your order status.
Similar Products
Featured collection
