✅ This brand is a high volume bestseller, and is frequently restocked to meet demand. If the product happens to sell out close to the time you purchase, you may experience a slight delay in shipping. Please rest assured that if we anticipate any significant delay, we will contact you as soon as we learn this.
Please feel free to review your order status on your order page, or use the chat on our website for updates on availability and your order status.
Description
Slip-On CSA Safety Boots for Moderate Winter Conditions
The Baffin Hunter STP is the affordable, lightweight CSA-certified safety boot in the Cleanflow Baffin lineup, with a steel safety toe and plate added to the same TPE shell and three-layer liner as the Hunter Plain Toe. At 6.21 lbs per pair and rated to -40°C, it is made for agriculture, construction, manufacturing, food processing, and utility work in moderate winter cold.
Key Features of Baffin Hunter STP Slip-On Safety Boots
- Steel safety toe and steel plate protect against falling objects and sharp objects underfoot, meeting CSA Grade 1 industrial safety standards
- Slip-on style with no laces lets you pull the boot on in seconds at shift change, useful in cold weather when laces are stiff or wet
- Lightweight at only 6.21 lbs per pair, one of the lightest CSA-rated Baffin boot Cleanflow carries, easier on the legs across long industrial shifts
- Flexible TPE upper stays soft in cold weather and resists cracking, lighter and more flexible than heavier moulded materials
- Nylon locking snow collar at the top pulls tight to seal out drifting snow, slush, and cold air, useful on outdoor sites and in cold rooms
- Removable three-layer liner traps body heat and pulls sweat away from your foot, slide it out at the end of a shift so it can dry overnight
- Rated to -40°C / -40°F, suitable for typical Canadian winter conditions across most industrial trades
- Self-cleaning outsole sheds mud, snow, and slush without clogging, useful on farm yards, construction sites, and slushy industrial floors
Baffin Technology Inside the Hunter STP
- TPE upper: Baffin uses Thermoplastic Elastomer, a flexible compound that stays soft and pliable in cold weather, resists cracking, and is lighter than moulded compounds on heavier Baffin models
- B-Tek™ Dry: waterproof base technology that seals the foot from moisture without trapping sweat inside
- Tri-Fit liner: a removable three-layer inner boot with PolyWick™ wicking, a high-density insulation layer, and a thin reflective lining that bounces body heat back to your foot
- Real-World Tested™: every Baffin safety boot is tested in real working conditions, not just a lab, before it ships
Specifications
| Specification | Detail |
|---|---|
| Brand | Baffin |
| Model | Hunter (STP variant) |
| Country of Manufacture | Made in Canada (Stoney Creek, Ontario) |
| Upper Material | Lightweight, flexible Thermoplastic Elastomer (TPE) compound |
| Snow Collar | Nylon locking snow collar |
| Toe Construction | Steel Safety Toe + Steel Plate (not metal-free) |
| Outsole | Self-cleaning rubber outsole |
| Inner Boot System | Removable Tri-Fit multi-layer (3-layer) |
| Inner Boot Layers | PolyWick™ wicking lining, High-Density insulation, thin reflective lining |
| Temperature Rating | -40°C / -40°F |
| Waterproofing | B-Tek™ Dry Waterproof construction |
| Closure | Slip-on style, no laces |
| Boot Height | 13.75 inches (based on size 9) |
| External Forefoot Width | 5 inches (based on size 9) |
| External Length | 12.25 inches (based on size 9) |
| Weight per Pair | 6.21 lbs (size 9), light |
| Available Sizes | 8, 9, 10, 11, 12, 13 |
Certifications
- CSA Z195-14, Canadian Standards Association safety footwear standard
- CSA Grade 1 toe protection (Green Triangle), steel safety toe withstands impact up to 125 joules and steel plate withstands force not less than 1,200 Newtons
- CSA Electric Shock Resistant (White rectangle with orange omega), sole assembly withstands 18,000 volts with leakage current not exceeding 1 mA for 60 seconds
- ASTM F2413, American safety footwear performance standard
- ASTM EH (Electrical Hazard) rated
- CE marked for European safety compliance
Applications
- Agriculture and livestock work in winter
- Construction sites in moderate winter conditions
- Manufacturing floors with safety toe requirements
- Food processing facilities with cold rooms and wet floors
- Utilities and electrical hazard zones where steel toe is acceptable
- Cold-weather work where extreme cold protection is not required
- Entry-level CSA-required jobs for new hires or seasonal workers
- Backup CSA winter boot for crews who own a separate extreme-cold boot for deep-winter days
Caring for Your Baffin Hunter STP
- TPE upper and rubber outsole: wipe with a damp cloth to remove dirt and grime
- Nylon snow collar: hand-wash with warm water. If dirt persists, use a mild detergent
- Let the boot and liner air dry naturally, do not use a heater, dryer, or direct flame to speed up drying
- Remove the inner boot at the end of each shift to let it dry separately, this extends liner life
- Before storing, remove all dirt and debris from the rubber and nylon
- Make sure the boot is fully dry before putting it away
- Store in a dark, dry, and cool place to protect the TPE upper from UV damage and heat
Buy Baffin Hunter STP Slip-On Safety Boots Online from Cleanflow
Cleanflow is an authorized Baffin supplier shipping the Hunter STP across Canada and the continental USA, with free shipping on eligible orders over $199. The TPE upper, steel safety toe and plate, nylon locking snow collar, and removable three-layer liner are Made in Canada at Baffin's Stoney Creek, Ontario factory, where the company has produced Canadian-made footwear since 1979. Every pair is backed by Cleanflow's 30-day return and exchange policy and full Baffin manufacturer warranty support through returns.cleanflow.net.
Browse the full Baffin work boot collection at Cleanflow to compare every model in the lineup.
Frequently Asked Questions
Are the Hunter STP boots CSA approved?
Yes. Among lightweight CSA winter safety boots Canada offers, the Hunter STP carries full CSA, ASTM, and CE certification. The steel safety toe protects against impact from falling objects, the steel plate under the sole protects against sharp objects underfoot, and the sole protects against electric shock. These are the certifications most Canadian and US worksites require.
How is the Hunter STP different from the Hunter Plain Toe?
Same boot, with safety added. The STP version has the same TPE upper, slip-on style, snow collar, and three-layer liner as the Hunter Plain Toe, plus a steel safety toe and steel plate. The Plain Toe is for casual outdoor use and agriculture where CSA certification is not required. The STP adds full CSA, ASTM, and CE safety certification.
How is the Hunter STP different from the Maximum STP?
Both are affordable CSA-certified steel toe safety boots. The Hunter STP is rated to -40°C with the slip-on TPE shell and snow collar, made for moderate winter cold. The Maximum STP is all-season rated with a GelFlex midsole and a different closure. Choose the Hunter STP for winter slip-on use, the Maximum STP for year-round wear.
Are these boots metal-free?
No. Among slip-on steel toe boots -40°C buyers consider, the Hunter STP uses a steel safety toe and a steel plate. If your worksite requires metal-free safety footwear, look at the Baffin Constructor or Derrick instead, which use composite (metal-free) toe and plate. The Hunter STP is for general industrial worksites where metal in safety footwear is allowed.
How warm is the Hunter STP at -40°C?
The Hunter STP handles typical Canadian winter cold down to about -40°C / -40°F. It is meant for moderate winter conditions, not deep arctic or extreme cold. The three-layer removable liner has a moisture-wicking layer, a high-density insulation layer, and a thin reflective lining that bounces body heat back to your foot.
Are the inner boots removable?
Yes. The three-layer liner slides out of the outer shell, which lets you dry it overnight after a wet or sweaty shift. Baffin sells replacement liners for the Hunter STP separately, so if the original liner wears out before the outer shell, you do not have to replace the whole boot. This extends boot life.
Are these boots slip-on or laced?
Slip-on. The Hunter STP has no laces. The TPE shell and nylon locking snow collar pull on over the foot and seal at the top of the calf. This makes the boot quick to get in and out of at shift change, especially helpful in cold weather when laces are stiff or wet.
What sizes does the Baffin Hunter STP come in?
Cleanflow stocks the Baffin Hunter STP in men's sizes 8 through 13. As entry-level CSA safety boots in the Baffin lineup, these are designed to fit a working sock. Baffin recommends ordering true to size. Cleanflow offers a 30-day return and exchange window if the fit is off when the boot arrives.
✅ This brand is a high volume bestseller, and is frequently restocked to meet demand. If the product happens to sell out close to the time you purchase, you may experience a slight delay in shipping. Please rest assured that if we anticipate any significant delay, we will contact you as soon as we learn this.
Please feel free to review your order status on your order page, or use the chat on our website for updates on availability and your order status.
Similar Products
Featured collection
