Excelpure 10" Inline Coconut Shell Carbon GAC Style Filter Cartridge | 1/4" Push Fittings

Excelpure 10" Inline Coconut Shell Carbon Filter Cartridge with 1/4" Push Fittings

This cartridge is commonly used as a polishing filter in beverage equipment, reverse osmosis systems, drinking fountains, water coolers, ice machines, refrigerators, coffee makers and other point of use applications. It reduces odor and/or tastes from the Reverse Osmosis permeate and provides high quality drinking water.

Specifications:

• Size: 2" Diameter x 10" Length
• Media: Activated Coconut Shell Carbon 20/50 Mesh
• Maximum Flow: 0.8 GPM (3 L/min.)
• Maximum Pressure: 100 PSI
• Maximum Temperature: 100°F. (38°C.)
• Connections: 1/4" Push Type Fittings
  

Installation Instructions:

1. Connections are all ” Push and Lock” using 1/4″ OD Tubing
2. Shut off Water Supply.
3. Push 1/4″ OD Tubing into inlet of the filter, all the way until the tubing stops.
4. Flush before use for 3 minutes into sink or bucket. Water to be discarded water with be black/grey, this is normal and will be washed away.
5. Connect tubing from appliance to the outlet side of the filter.
6. Turn on water. Check for leaks.

NOTE: This filter is designed to improve municipal quality water. Do not use this filter where the water is micro biologically unsafe or of unkown quality.

Update - Re-Branded to Franklin Water

Please note: As of Spring 2025, Excelpure cartridges have been re-branded as Franklin Water. The packaging and appearance of these products has been updated, which is not yet reflected in the photos displayed on our website. Rest assured, the Franklin Water products are identical in performance to the previous Excelpure  branded products. The part numbers have also changed and are noted below:

Disclaimer:
The AIC10EZ is the only compatible replacement cartridge we carry. If your system requires the previous model (A4TEU6), please note that we do not carry that cartridge. Older systems using the A4TEU6 typically require an inline filter setup with female threaded ends, allowing connection to 3/8" tubing using separate threaded fittings. If you have one of these older setups, please ensure your fittings and tubing are compatible with your system's requirements before purchasing.