Triple R HT-89A Hydrostatic Test Pump (300 PSI, 3 GPM, 115V Electric)

Fire Sprinkler Hydrostatic Test Pump with a One-Way Valve Hose

Product Overview

A hydrostatic test drags on when the pump fills the piping slowly or cannot hold a steady pressure while the inspector reads the gauge. The Triple R HT-89A hydrostatic test pump delivers 3.0 GPM open flow, stops adding water at the set pressure, and disconnects from the system without releasing test pressure. This 300 PSI hydro test pump electric runs on a standard 115V outlet.

Key Features and Benefits of Triple R HT-89A Hydrostatic Test Pump 300 PSI

• At 3.0 GPM open flow, the pump moves 50% more water than a 2.0 GPM pump, so long pipe runs fill in less time. Open flow is the pump's flow rate with no system pressure applied.
• This hydrostatic test pump with pressure regulator control closes off the water supply once the set pressure is reached. A built-in full-flow bypass and pressure protection system guard against over-pressurizing the pump and burning out the motor.
• The 10-foot quick-disconnect hose has a built-in one-way valve, so the pump can be separated from a pressurized system. Inspectors often require that step to confirm the system holds pressure on its own.
• The ½ HP ball bearing motor has a 115% service load factor, which allows continuous operation at 0.575 HP without damage. Triple R rates the pump 20% more efficient than comparable units.
• A liquid-filled stainless steel gauge steadies the needle against pump pulsation and vibration, so readings are easier to take.
• At 35 lbs with a carry handle, one person can carry the pump to the test location.

Applications

The Triple R HT-89A hydrostatic test pump covers pressure tests at or below 300 PSI on small and medium systems. It is a fire protection test pump for sprinkler fitters and a line tester for plumbers.

• Fire sprinkler and standpipe systems. Acceptance and revision tests on small and medium buildings call for a fire sprinkler hydrostatic test pump that fills lines steadily and holds pressure through the inspection.
• Plumbing and water lines. A 300 PSI electric hydrostatic test pump checks water piping for leaks before walls are closed or trenches are backfilled.
• Water transfer and line filling. Restoration and carpet cleaning crews use the pump for small water transfers and vent-line filling.
• Indoor and enclosed spaces. This electric pressure test pump runs without fuel, so there are no exhaust fumes in basements or mechanical rooms.

What's Included

The 300 PSI electric hydrostatic test pump ships with:

• HT-89A pump assembly (115 VAC model) with carry handle
• Liquid-filled stainless steel pressure gauge
• 10-foot quick-disconnect discharge hose with built-in one-way valve
• Hose filter

Technical Specifications

HT-89A vs REED EHTP500

The HT-89A vs REED EHTP500 decision comes down to test pressure versus fill speed. The REED EHTP500 reaches 500 PSI at 2 GPM. The Triple R HT-89A hydrostatic test pump tops out at 300 PSI but delivers 3.0 GPM open flow, so it fills piping faster on tests within its rating.

Each is a hydrostatic test pump with pressure regulator control built in. When a larger system needs more flow than a 300 PSI electric hydrostatic test pump provides, the Triple R HT454 delivers 4.5 GPM open flow at up to 400 PSI.

Buy the Triple R HT-89A Hydrostatic Test Pump Online from Cleanflow

Cleanflow Utility Supply Company is an authorized Triple R supplier, with the Triple R HT-89A hydrostatic test pump for sale in Canada. Orders ship across Canada and the USA, and free shipping applies to most orders over $199. For help choosing a fire protection test pump for a specific system, call 1-866-335-1078. Email info@cleanflow.ca for returns and exchanges within 30 days.