✅ This brand is a high volume bestseller, and is frequently restocked to meet demand. If the product happens to sell out close to the time you purchase, you may experience a slight delay in shipping. Please rest assured that if we anticipate any significant delay, we will contact you as soon as we learn this.
Please feel free to review your order status on your order page, or use the chat on our website for updates on availability and your order status.
Description
Lightweight CSA Safety Boots for Year-Round Work
The Baffin Monster 6 inch is the shortest and lightest CSA safety boot in the Baffin lineup, made for crews who need composite toe protection without the weight of a tall winter boot. At 8.5 inches tall and 6.7 lbs per pair, it has a composite toe and plate, waterproof leather upper, anti-fatigue midsole, and 100g insulation for year-round wear in moderate cold.
Key Features of Baffin Monster 6" Composite Toe Safety Boots
- 6 inch composite toe work boots at only 6.7 lbs per pair, the lightest CSA-rated Baffin boot Cleanflow carries, noticeably easier on the legs through long shifts
- Composite toe and plate protect against falling objects and sharp objects underfoot, with no metal anywhere in the toe or plate, a safer choice on electrical worksites
- Waterproof leather upper with a breathable lining keeps your feet dry through wet snow, slush, washdowns, and rain, while letting sweat escape
- Speed laces glide quickly through smooth metal eyelets when you pull them tight, with no snagging on rebar or conduit on busy construction sites
- Pull loop at the back of the boot makes it easier to slide on, especially at shift change with cold or stiff hands
- Anti-fatigue insole and two-layer cushioned midsole absorb shock and spring back with every step, easing leg and back fatigue across long shifts on hard surfaces
- Rubber toe guard and tough plastic heel cup add extra protection at the two parts of the boot that wear out first
- Deep lug outsole, oil and acid resistant, grips wet concrete, gravel, and slick industrial floors
Baffin Technology Inside the Monster 6 Inch
- B-Tek™ Dry: waterproof base technology that seals the foot from moisture without trapping sweat inside
- Anti-fatigue insole and base: a cushioned layer inside the boot that absorbs shock and returns energy as you walk, reducing leg fatigue across long shifts
- Dual-density polyurethane midsole: two layers of cushioning, one firmer for support and one softer for shock absorption
- Fixed-Fit inner boot system: a built-in liner with Thermaplush™ wicking, B-Tek™ Foam comfort lining, and 100g insulation for light-cold wear
- Fixed frost plate: a layer inside the base of the boot that reflects body heat back up toward your foot and blocks cold from rising through the sole
- Real-World Tested™: every Baffin safety boot is tested in real working conditions, not just a lab, before it ships
Specifications
| Specification | Detail |
|---|---|
| Brand | Baffin |
| Model | Monster 6 Inch (STP variant) |
| Country of Manufacture | Canada (Stoney Creek, Ontario) |
| Upper Material | Waterproof leather with breathable membrane and padded top collar |
| Toe Construction | Composite (metal-free) Safety Toe + Plate |
| Outsole | Oil and acid resistant rubber, multi-directional lug pattern |
| Midsole | Dual-density Polyurethane (PU), moulded for stability |
| Insole | Anti-fatigue base technology for shock absorption and energy return |
| Heel Counter | Thermoplastic Polyurethane (TPU) external |
| Toe Guard | Rubber, for added wear protection |
| Inner Boot System | Fixed-Fit multi-layer with Thermaplush™, B-Tek™ Foam, and Fixed Frost Plate |
| Insulation Level | Comparable to 100g (light, year-round wear, not extreme cold) |
| Waterproofing | B-Tek™ Dry Waterproof breathable membrane with booty construction |
| Closure | Catch-resistant speed lacing system, pull loop at back |
| Boot Height | 8.5 inches (based on size 10) |
| External Forefoot Width | 4.5 inches (based on size 10) |
| External Length | 12.75 inches (based on size 10) |
| Weight per Pair | 6.7 lbs (size 10) |
| Slip Resistance Testing | CSA Z195-14 COF on quarry tile and stainless steel, wet and dry, at room and cold-climate conditions |
| Available Sizes | 7, 8, 9, 9.5, 10, 10.5, 11, 12, 13, 14 |
Certifications
- CSA Z195-14, Canadian Standards Association safety footwear standard
- CSA Grade 1 toe protection (Green Triangle), composite safety toe withstands impact up to 125 joules and plate withstands force not less than 1,200 Newtons
- CSA Electric Shock Resistant (White rectangle with orange omega), sole assembly withstands 18,000 volts with leakage current not exceeding 1 mA for 60 seconds
- ASTM F2413, American safety footwear performance standard
- ASTM EH (Electrical Hazard) rated
- CE marked for European safety compliance
- Slip resistance tested per CSA Z195-14 for Coefficient of Friction on quarry tile and stainless steel, wet and dry, at both room temperature and cold-climate conditions
Applications
- Construction sites in spring, summer, fall, and milder winter
- Manufacturing floors with chemical contact
- Food processing facilities with wet floors
- Agriculture and livestock work outside deep-cold months
- Utilities and electrical hazard zones requiring metal-free toe protection
- Petrochemical and chemical processing plants
- Outdoor maintenance work on pipelines, rail yards, and equipment yards
Caring for Your Baffin Monster 6" Composite Toe Safety Boots
- Leather upper: apply a non-coloured shoe cream to the surface every few weeks to keep the leather supple and water-resistant
- Rubber outsole: wipe with a damp cloth to remove dirt and grime
- Let the boot air dry naturally, do not use a heater, dryer, or direct flame to speed up drying
- Before storing, remove all dirt and debris from the rubber and leather
- Make sure the boot is fully dry before putting it away
- Store in a dark, dry, and cool place to protect the leather from UV damage and heat
Buy Baffin Monster 6 Inch Composite Toe Safety Boots Online from Cleanflow
Cleanflow is an authorized Baffin supplier shipping the Monster 6 inch across Canada and the continental USA, with free shipping on eligible orders over $199. The waterproof leather upper, composite safety toe and plate, anti-fatigue midsole, and speed lacing system are made at Baffin's Stoney Creek, Ontario factory, where the company has produced Canadian-made footwear since 1979. Every pair is backed by Cleanflow's 30-day return and exchange policy and full Baffin manufacturer warranty support through returns.cleanflow.net.
Browse the full Baffin work boot collection at Cleanflow to compare every model in the lineup.
Frequently Asked Questions
Are the Monster 6 inch boots CSA approved?
Yes. The Monster 6 inch is part of Baffin's year-round CSA safety boots, with full CSA, ASTM, and CE certification. The composite toe protects against impact from falling objects, the plate under the sole protects against sharp objects underfoot, and the sole protects against electric shock. These are the certifications most Canadian and US worksites require.
How is the Monster 6 inch different from the Ice Monster?
The Monster 6 inch is shorter (8.5 inches vs 10.75 inches), lighter (6.7 lbs vs 7.05 lbs per pair), and has less insulation (100g vs 400g). The Ice Monster also has the IceBite® Grip outsole for ice traction. Choose the Monster 6 inch for year-round wear in moderate cold, the Ice Monster for icy conditions and colder winter shifts.
How warm is the Monster 6 inch?
Light insulation. The Monster 6 inch has 100g insulation, suitable for cool weather rather than deep winter cold. It is meant for year-round wear, useful in spring, summer, fall, and milder winter shifts. If you need a CSA-certified boot for extreme cold, look at the Baffin Constructor or Titan STP, which carry an eight-layer inner boot rated to -100°C.
Are these boots waterproof?
Yes. The Monster 6 inch is one of Baffin's waterproof leather work boots with composite toe protection. The leather upper is paired with a breathable lining that keeps your feet dry through wet snow, slush, washdowns, and rain, while letting sweat escape. Apply a non-coloured shoe cream to the leather every few weeks to keep the upper supple.
Are these boots metal-free?
Yes. The composite toe, composite plate, and metal-free hardware make the Monster 6 inch a safer choice for electrical hazard work and any worksite where metal in your boots is not allowed. The boot still meets full CSA Grade 1 safety standards. There is no steel anywhere in the safety construction.
How does the speed lacing system work?
The Monster 6 inch uses smooth metal eyelets along the upper that let the laces glide through quickly when you pull them tight. The hardware will not snag on rebar or conduit on the worksite. A pull loop at the back makes the boot easier to slide on, especially at shift change with cold or stiff hands.
What sizes does the Baffin Monster 6 inch come in?
Cleanflow stocks the Monster 6 inch in men's sizes 7 through 14. Baffin recommends ordering true to size.
Video Guide
✅ This brand is a high volume bestseller, and is frequently restocked to meet demand. If the product happens to sell out close to the time you purchase, you may experience a slight delay in shipping. Please rest assured that if we anticipate any significant delay, we will contact you as soon as we learn this.
Please feel free to review your order status on your order page, or use the chat on our website for updates on availability and your order status.
Similar Products
Featured collection
