Description
Manual Water Removal Pump With 72" Hose for Meter Pits, Valve Boxes, and Hydrant Pits
Overview
Standing water in a meter pit blocks the meter face, corrodes fittings, and turns routine reads into safety hazards. The Reed MP175-6 is a manual dewatering pump that clears flooded pits in minutes. It moves 35 ounces per stroke through a 72" hose, weighs 2 lbs, and needs no batteries or power source.
Specifications
| Specification | Detail |
|---|---|
| Catalog No. | MP175-6 |
| Item Code | 02327 |
| Pump Barrel | 1 3/4" x 36" |
| Hose | 72" (6 ft) plastic, screws into pump outlet |
| Capacity | 35 oz per stroke (~4 strokes per gallon) |
| Weight | 2.0 lbs (0.9 kg) |
| Construction | PVC |
| Operation | Manual (one-hand push-pull) |
Key Features
- 35-Ounce Stroke. Each full push-pull cycle moves 35 ounces of water. At a steady pace, the pump clears roughly a gallon every four strokes, enough to empty a standard meter pit in a few minutes.
- 72" Screw-On Hose. The 6-foot hose threads directly into the pump outlet and directs water away from the work area. The threaded connection holds without clamps or adapters.
- PVC Construction. The pump body and barrel are PVC, which resists corrosion from standing water, mud, and debris found in underground pits. Total weight is 2.0 lbs.
- One-Hand Operation. The 36" barrel and handle are sized for one-hand pumping. The free hand can hold a flashlight, lift a pit lid, or brace against the pit opening.
- No Power Required. The MP175-6 runs entirely on manual effort. There are no batteries to charge, no cords to manage, and no motors to maintain. It works the same in remote locations as it does on a city block.
How to Use
- Screw the 72" hose into the pump outlet. Position the hose end where you want the water to drain.
- Lower the pump into the standing water.
- Hold the pump body in one hand. Pull and push the pump handle to begin the pumping action.
- Continue at a steady pace until the pit is clear.
To extend the life of the seals and reduce water leakage past the piston, lubricate the pump shaft with a heavy, lithium-based grease. Always wear safety glasses when pumping.
Applications
The MP175-6 is a hand pump for standing water in any below-grade enclosure:
- Water meter pits before reading or servicing meters
- Valve boxes flooded by rain or groundwater
- Fire hydrant pits before repair or inspection
- Pipe trenches during excavation work
- Catch basins and small sumps
- Any utility vault or access point with standing water
Buy Reed MP175-6 Meter Pit Pump Online from Cleanflow
Cleanflow Utility Supply Company is an authorized Reed dealer serving customers across Canada and the United States. Free shipping on orders over $199, with a 30-day return policy. The Reed MP175-6 ships ready to use with the 72" hose included.
Browse all Reed water services tools or see the full dewatering pumps collection.
Frequently Asked Questions
Reed MP175-6 vs Pump Stick: which should I use?
The MP175-6 is manual, costs less, and needs no batteries. The Reed Pump Stick is battery-powered and pumps 330 gallons per hour hands-free. Choose the MP175-6 for quick meter pit jobs where you need to pump and move on. Choose the Pump Stick for high-volume or extended water removal where hands-free operation matters.
How to pump water out of a meter pit?
Screw the hose onto the pump outlet and position the hose end away from the pit. Lower the pump into the water, then push and pull the handle at a steady pace. The MP175-6 moves 35 ounces per stroke, so a typical meter pit clears in two to three minutes of steady pumping.
Best pump for removing water from meter pits?
For routine meter pit clearing, a manual meter pit pump like the Reed MP175-6 is the most practical option. It weighs 2 lbs, fits in a truck toolbox, and works without a power source. Battery-powered pumps handle larger volumes but cost more and require charged batteries.
How much water does the Reed MP175-6 pump per stroke?
The MP175-6 moves 35 ounces of water per stroke. That is just over a quart per stroke, or about one gallon every four strokes. Pumping speed depends on the operator, but a steady pace clears most meter pits in a few minutes.
Can a meter pit pump drain a fire hydrant?
Yes. Reed lists fire hydrant pit drainage as a use case for the MP175-6. The pump works in any standing water, so it can clear water from a hydrant pit before repair or inspection. For larger hydrant vaults with higher water volume, a battery-powered water removal pump may be faster.
How-To Articles
Similar Products
Featured collection
