✅ This brand is a high volume bestseller, and is frequently restocked to meet demand. If the product happens to sell out close to the time you purchase, you may experience a slight delay in shipping. Please rest assured that if we anticipate any significant delay, we will contact you as soon as we learn this.
Please feel free to review your order status on your order page, or use the chat on our website for updates on availability and your order status.
Description
Wildland Firefighter Safety Boots with 300°C Contact Melting Point, 18kV Electric Shock Resistance, Felt Lining, Flame Retardant Construction, and Brass Zipper | Viking VW93
Product Overview
The ground under a wildfire can reach 300 degrees. Your boots handle that before anything else matters. The Viking Firefighter® VW93 Wildland Fire and Rescue Safety Boot is certified to NFPA 1977-2022 for wildland and urban interface firefighting, with a 300°C contact melting point, 30 minutes of direct contact heat at 150°C, and 2,500 volts of wet dielectric protection. Waterproof wildland firefighter safety boots that handle fire, electrical hazard, chemical exposure, and rough terrain in one piece of footwear.
Key Features
- NFPA 1977-2022 wildland fire certification: Certified for wildland firefighting and urban interface firefighting under NFPA 1977-2022. NFPA 1977 wildland fire fighting boots CSA rated for Canadian fire services, volunteer departments, and forest fire crews.
- 300°C contact melting point, 150°C for 30 minutes: The sole withstands 300°C contact without melting and holds against 150°C of direct heat for a full 30 minutes. Flame retardant safety boots with 300°C heat resistance for walking on fire-heated ground and debris.
- 18kV electric shock, 2,500V wet dielectric: CSA Omega rated to 18kV for electric shock resistance. Dielectric 2.5kV wet tested to CE EN 50321-1:2018 Class 00. Electric shock resistant firefighter boots 18kV for downed power lines, structure fires with exposed wiring, and post-storm wildfire response.
- CSA Z195-14 / ASTM F3413-24 Grade 1 steel toe and plate: Grade 1 impact protection at the toe and a puncture-rated steel plate in the sole. CSA Z195 steel toe fire boots with dielectric protection that meet both Canadian and American safety footwear standards.
- CBRN chemical resistance (NFPA 1990): Chemical protection tested to NFPA 1990 (2022) for hazardous materials and CBRN operations. Protects against chemical exposure during wildfire response, vehicle accidents involving flammable liquids, and industrial fire incidents.
- Flame retardant upper, lining, and laces: The upper resists flame and provides heat insulation. The lining adds a second fire barrier. Even the adjustable lace system is flame resistant, so no component of the boot feeds the fire.
- Felt lined with brass zipper and kick-off spur: Felt lining provides comfort and warmth during extended operations. Brass zipper on the side for fast boot entry. Kick-off spur for hands-free removal. Felt lined wildland fire boots with brass zipper for crews who gear up and strip down multiple times per call.
- Oil rated lug sole, reflective patch, reinforced backstay: Oil rated lug sole for traction on debris, slopes, and slick surfaces. Reflective safety patch for visibility. Reinforced backstay protects the heel tendon during prolonged wear. Slip tested to ASTM F3445-21.
Specifications
| Product | Viking Firefighter® Wildland Fire & Rescue Safety Boot |
|---|---|
| Brand | Viking |
| SKU | VW93 |
| Wildland Fire Cert | NFPA 1977-2022 (wildland and urban interface) |
| Safety Footwear | CSA Z195-14 / ASTM F3413-24 Grade 1 steel toe and plate |
| Electric Shock | CSA Omega 18kV |
| Dielectric | 2.5kV wet tested, CE EN 50321-1:2018 Class 00 |
| Heat Resistance | 300°C contact melting point, 150°C direct for 30 min |
| Chemical Resistance | NFPA 1990 (2022) hazardous materials and CBRN |
| Slip Resistance | ASTM F3445-21 |
| Upper | Flame retardant with heat insulation |
| Lining | Flame retardant + felt lined |
| Lace System | Flame-resistant adjustable lace |
| Outsole | Oil-resistant lug sole |
| Closure | Brass zipper + adjustable lace |
| Additional | Reflective safety patch, reinforced backstay, kick-off spur |
| Flex Durability | Over 300,000 cycles |
| Sizes | 8, 9, 10, 11, 12, 13 |
Applications
The Viking VW93 is the best wildland firefighter boots for Canadian fire services that need NFPA 1977 compliance, CSA steel toe, and dielectric protection in one boot. Chemical resistance for CBRN and hazmat adds capability beyond standard wildland use.
- Wildland firefighting and prescribed burns
- Urban interface firefighting
- Forest fire response and suppression
- General fire rescue and volunteer departments
- Industrial firefighting and refinery response
- Motor vehicle accidents involving flammable liquids
See the full specialty rubber work boots collection and all Viking boots at Cleanflow Utility Supply Company.
Buy the Viking Firefighter VW93 Wildland Boot from Cleanflow Utility Supply Company
Cleanflow Utility Supply Company is an authorized distributor of Viking safety boots. The Viking VW93 Wildland Fire and Rescue Safety Boot ships across Canada and the USA. Free shipping on orders over $199. Returns accepted on qualifying orders. Wildland firefighter safety boots in sizes 4 to 15.
Call 1-866-335-1078 (Canada) or 1-204-888-8469 (USA), or email [email protected] for bulk pricing, net terms, and department orders.
Frequently Asked Questions
What does NFPA 1977-2022 certify?
NFPA 1977 certifies protective clothing and equipment specifically for wildland fire fighting and urban interface fire fighting. It covers heat resistance, flame spread, and durability under wildfire conditions. This is different from NFPA 1971, which covers structural firefighting boots.
Can this boot handle downed power lines?
The VW93 is CSA Omega rated to 18kV for electric shock resistance and dielectric tested to 2.5kV wet under CE EN 50321-1:2018 Class 00. It provides protection in environments where downed power lines, exposed wiring, or electrical hazards are present during fire response.
Does this boot protect against CBRN chemicals?
Yes. Chemical resistance is tested to NFPA 1990 (2022) for protective ensembles for hazardous materials and CBRN operations. This gives the boot capability for wildfire scenes involving chemical exposure, vehicle accidents with flammable cargo, and industrial fire incidents.
How fast can you get the boot on and off?
The brass zipper on the side opens the boot wide for fast entry. The adjustable flame resistant lace system lets you tighten the fit once your foot is in. The kick-off spur on the back lets you remove the boot hands-free by stepping on it with the other foot.
What sizes are available?
Sizes 4 through 15. Twelve sizes total. Felt lined for comfort during extended wildland operations. Contact Cleanflow Utility Supply Company for department and crew order pricing.
Video Guide
✅ This brand is a high volume bestseller, and is frequently restocked to meet demand. If the product happens to sell out close to the time you purchase, you may experience a slight delay in shipping. Please rest assured that if we anticipate any significant delay, we will contact you as soon as we learn this.
Please feel free to review your order status on your order page, or use the chat on our website for updates on availability and your order status.
Similar Products
Featured collection
