Viking® VW69-1 Timberwolf Boots with Spiked Sole - Chainsaw Cut Protection Class 3, Steel Toe, Caulked Sole, Chemical & Oil Resistant, High Impact, Flexible, Reflective for Arborists & Forestry

Caulked Chainsaw Boots with Class 3 Cut Protection, Steel Toe, and Spiked NBR Sole, Sizes 9 to 13

Product Overview

The Viking Timberwolf VW69-1 is a caulked chainsaw boot for steep-grade felling and bucking. Class 3 cut protection rated to 28 m/s chain speed covers the front, sides, and instep. The spiked sole grips wet bark and log surfaces where flat treads slide. Vulcanized waterproof construction bonds the entire shell under heat and pressure with no glue seams to separate.

Specifications

Key Features of Viking® VW69-1 Timberwolf Boots

• Class 3 chainsaw cut protection: rated to EN ISO 17249:2013 at 28 m/s chain speed. Cut-resistant material covers the front, sides, and instep, the zones most exposed during felling and limbing.
• Caulked NBR spiked sole: nitrile butadiene rubber studs bite into wet bark, mossy logs, and steep grades where flat-soled boots lose traction. NBR resists degradation from bar oil, fuel spills, and hydraulic fluid.
• Steel toe and steel plate: CSA Z195-14 and ASTM F3413-24 Grade 1 rated for impact and compression. The plate protects against puncture from spikes, nails, and sharp debris underfoot.
• Vulcanized waterproof construction: SBR-blended natural rubber upper bonds under heat and pressure into a single waterproof shell. No glue seams to separate. Handles rain, creek crossings, and standing water through a full cutting season.
• Achilles tendon and ankle protection: reinforced padding at the heel and ankle guards against kickback impacts and falling limbs. Reduces the risk of rolling on steep slopes and slash piles.
• Uninsulated for active chainsaw work. Felling and bucking generate substantial body heat. Insulation causes overheating and blisters during active cutting. For winter operations below freezing, the Viking VW93-3 Winter Bushwhacker adds insulation rated to minus 70 degrees Celsius.

Applications

Among arborist boots, the Timberwolf VW69-1 combines Class 3 chainsaw cut protection with a caulked sole for steep-grade traction. That covers the two main hazards on a cutblock: chain contact and slipping.

• Felling, bucking, and limbing on steep coastal and mountain grades
• Arborist climbing, rigging, and takedown operations
• Salvage logging on burned or storm-damaged cutblocks
• Log sorting, scaling, and yard work on wet decks
• Right-of-way clearing and brush removal through standing timber

Caulked Sole or Flat Sole: Which Timberwolf Fits Your Block

The Timberwolf ships in two sole configurations. The VW69-1 has a caulked spiked sole for traction on bark, wet wood, and steep grades. The VW68-1 Timberwolf has a flat lug sole and adds electric shock resistance. Both carry Class 3 chainsaw cut protection, steel toe, and steel plate.

Choose the caulked VW69-1 for felling and bucking on coastal slopes, salvage logging, and log deck work. The trade-off: caulks wear down on pavement, concrete, and metal grating. Move between blocks in flat-soled boots and switch to caulks on the cut.

Choose the flat-sole VW68-1 if your crew works mixed terrain with roads or concrete between sets, or if the operation runs near live power. The flat sole handles mud, gravel, and loose ground without the surface restrictions of caulks.

Buy Caulked Chainsaw Boots Online from Cleanflow

Cleanflow Utility Supply Company stocks the Viking Timberwolf VW69-1 in sizes 9 through 13 as part of the Viking Footwear catalog.

These arborist boots ship with Class 3 chainsaw cut protection, steel toe and plate, caulked NBR spiked sole, and vulcanized waterproof construction.

Free shipping on this product. Ships across Canada and the United States. Returns accepted within 30 days. Email info@cleanflow.ca for crew sizing, volume pricing, or to confirm availability in your size.