HCP Model 50SA2.4A 2" Industrial Stainless Steel Submersible Dewatering Pump | 1/2 HP | Single and Three Phase Power

HCP Model 50SA2.4A Stainless Steel Submersible Dewatering Pump: Ideal for acid-corrosive and seawater applications

The HCP Model 50SA2.4A, constructed with SUS316 stainless steel and Viton O-rings is an ideal dewatering solution for acid-corrosive and seawater applications

This stainless steel pump is a 1/2 HP industrial quality pump available with120 Volt Single Phase or 240 Volt Three Phase motors. These pumps are ideally suited for corrosive dewatering applications that have limited solids. Featuring a robust bottom end strainer that provides a solid base while preventing stones and pebbles from entering the pump and jamming the impeller. The single phase 120 Volt pump is highly portable and has a 30' cable with a three prong 120V plug. The 240 Volt three phase pump has a 30' cable for connection to a control panel.

Key Features: Reliable and Efficient

• Durable Dual Seals: Equipped with a carbon/ceramic upper side and silicon/carbide lower side seal for long life in dirty water applications. The motors use viton o rings.
• Sturdy Construction: The upper cover, motor frame and volute are made with ASTM A744 CF8M stainless steel alloy.
  
• Severe Service Impeller: Vortex impeller is made with ASTM A744 CF8M austenitic stainless steel classified for Castings, Iron-Chromium-Nickel, Corrosion-Resistant, for Severe Service
  
• Motor Protection: The 120 Volt Single Phase motor is equipped with a built-in thermal protector to prevent pump overheating, as well as an embedded moisture sensor to provide an alarm signal to a control panel.
• Optional Float Switch: An optional piggyback float switch can automatically control the single phase pump's on/off function based on water levels.
• Compact Design: Measures 9-5/8" x 6-3/4" x 17-1/8" tall and weighs 31 lbs.
• High Capacity: 2 Inch FPT discharge, handles 3/8" solids.
• Powerful Motors:
  • 1/2 HP, 120V, 1 Phase: 6.2Amp with a 30' cable length.
  • 1/2 HP, 240V, 3 Phase: 2.2Amp with a 30' cable length.
• High Performance: Maximum flow of 75 GPM @ 8' head and maximum head of 32 feet @ 5 GPM.
• Certified: UL778 and CSA c22.2 No 108-14 certified for quality and safety.

Elevate Your Dewatering Efficiency

Upgrade your dewatering system with the HCP Stainless Steel Submersible Dewatering Pump. Designed for durability and efficiency, this pump ensures smooth operation in muddy, silty, corrosive and seawater water conditions. With its built-in thermal protector (120 Volt single phase only) and optional piggyback float switch, you can trust this pump to provide continuous, reliable service in challenging environments.